Victron-Products
Victron-Products Victron-products: Victron Energy provides power solutions to the marine, industrial, automotive, automotive, off-grid and solar markets worldwide. Founded in 1975 by Reinout Vader, Victron Energy is based in Almere-Haven, the Netherlands.
Autotransformers, Chargers, Inverters, Inverters/chargers. Isolation Transformers, Ground Power Cable, Battery Isolators. Battery Monitoring Systems.Victron-Products Battery Protection. DC-DC converters. Reverses/charger/MPPT
Solar Chargers, Solar Inverters, Solar Panels, Solar Home Systems, Components, Cables, DC Distribution Systems, Systems and Panels Monitoring, Transfer Switches
Victron-Products Victron BlueSolar charge controllers enable automatic battery voltage recognition, intelligent battery management with load shedding, ultra-fast response times to solar radiation and multi-stage charging algorithms. Victron MPPTs are unique in incorporating solar power limiting, which ensures that a system's power output will never exceed the controller's maximum rating.
Victron Energy - Products Price List
Victron-products: On this page, you can download it Victron Energy price list.. All products are classified by category, including product code, product name, thumbnail, measurements, weight and price.
SmartSolar MPPT Charger Controllers
Victron SmartSolar MPPT solar controllers with BlueTooth offer a variety of solar controllers suitable for industrial, mining, marine, caravan and RV applications. The proof of Victron quality and reliability is the 5-year Victron product warranty.
Victron-Products BMV-712 Bluetooth Battery Monitor
Victron BMV-712 battery display for two Bluetooth batteries including branch. 1 volt battery, amplifiers, ampere hours and 2 volt battery. Full tracking is available on your iPhone or Android device with the free Victron Connect app.
The Bluetooth SmartShunt
Victron 500A / 50mV SmartShunt is a powerful battery screen with built-in Bluetooth for monitoring on your mobile phone, tablet or computer via the VictronConnect app or connected to a Victron GX device. It has all the features of the BMV-712 but without a special screen.
Victron-Products All prices quoted are per unit and in EUR excluding VAT. These recommended values are a guideline only and may vary depending on local conditions.
Victron Retail Discounts 15%
Price list Victron Energy EUR-without-ΦΠΑ
90 results
-
victron energy representation-2 (108)
-
Victron Inverters (85)
-
Victron Inverters-chargers (43)
-
Victron Accessories Accessories (3)
-
Victron Autotransformers (22)
-
Victron Transfer switches (15)
-
Victron Solar Inverters (15)
-
Victron Solar chargers (50)
-
Victron Solar panels (15)
-
Victron DC-DC Transformers (15)
-
Victron Isolation transformers (15)
-
Victron Batteries (38)
-
Victron Monitoring systems and (1)
-
Victron Battery protection (1)
-
Victron DC Distribution Systems (56)
-
Victron Battery monitoring systems (4)
-
Victron Chargers (70)
-
Battery isolators (1)
-
Solar F1x4 cable
1.95 €
1.45 € Excluding VAT
1.80 € Includes VAT4mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems
Price without VAT
Available on backorder
-
Victron Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for the BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.Price without VAT
Available on backorder
-
Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for BlueSolar PWM-Pro charge regulators.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-ProAvailable on backorder
-
BlueSolar PWM-Pro to USB interface cable
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATWith the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Available on backorder
-
SCC VIC BlueSolar PWM-Pro to USB interface cable
13.00 €
9.00 € Excluding VAT
11.16 € Includes VATWith the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
19.00 €
16.00 € Excluding VAT
19.84 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
SpecificationsManufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VATVictron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
29.00 €
24.50 € Excluding VAT
30.38 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Price without VAT
Available on backorder
-
Victron SmartSolar Pluggable Display
34.00 €
28.00 € Excluding VAT
34.72 € Includes VATVictron SmartSolar Pluggable Display
The SmartSolar Control display is a plug-in LCD display for SmartSolar charge controllers. Simply remove the rubber seal that protects the connector on the front of the controller and connect the display plug
Available on backorder
-
Victron Energy Current Transformer 100A:50mA for MultiPlus-II (1 m)
55.04 €
33.00 € Excluding VAT
40.92 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
SolidSwitch 104
36.85 €
35.85 € Excluding VAT
44.45 € Includes VATSolidSwitch 104
The SolidSwitch 104 will switch DC loads up to 70V/4A and can be controlled by a low power digital signal.
Available on backorder
-
Remote panel for bluesolar duo
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATPWM controller
Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
Programmable charging current ratio (normal setting: equal current for both batteries)
Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
Internal heat sensor and optional remote control heat sensor
It is protected from overvoltage
It is protected against short circuits
It is protected from reverse polarity of photovoltaic panels and / or batteries.
BlueSolar 12 / 24-10 with timer 10A to 12V or 24VPrice without VAT
Available on backorder
-
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATVictron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
- Battery Voltage: 12 / 24V (Automatic selection)
- Night mode (details in the Remote Panel manual)
- Rated charging current: 30 A
- Second battery output: not available
- Automatic load disconnection: Yes (maximum load 30A)
- Maximum input voltage of PV panel: 28V / 55V
- Self-consumption: <10mA
- Protection: battery reverse polarity, short circuit, overheating
- Operating temperature range -20 to +50 C
- Absorption charge (default): 14.4V (12V) / 28.8V (24V)
- Float charge (default): 13.8V (12V) / 27.6V (24V)
- Equalization charge (default): 14.6V (12V) / 29.2V (24V)
- Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
- Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
- Protection class (dust-humidity): IP 30
- Dimensions: 138x70x37 mm
- Warranty: 5 Years
Available on backorder
-
Remote panel for BlueSolar PWM-Pro
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATDevice for monitoring photovoltaic systems
Programmable The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: - With the help of a computer and software - With the dedicated BlueSolar Pro Remote Panel (see features below).
General characteristics
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable. -
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor. -
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and / or battery.
- Day / night timing options See Remote Panel manual for details
Price without VAT
Available on backorder
-
Victron 12V/14Ah AGM Deep Cycle Battery
48.00 €
38.72 € Excluding VAT
48.01 € Includes VATVictron 12V/14Ah AGM Deep Cycle Battery
Victron 12V/14Ah AGM Deep Cycle closed type photovoltaic deep discharge battery from Victron Energy for high starting amperes.
Available on backorder
-
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VATVictron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type MPPT Power (W) 145 (12V) / 290 (24V) Manufacturer VictronEnergy Input voltage (V) 75 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron smallBMS
57.00 €
45.06 € Excluding VAT
55.87 € Includes VATVictron smallBMS
The Victron smallBMS is a simple and low-cost alternative to the VE.Bus BMS V2 and can replace it in many applications.
Available on backorder
-
Cyrix-Li-load 12 / 24V-120A
46.06 €
45.06 € Excluding VAT
55.87 € Includes VATCyrix-Li-load 12 / 24V-120A
The Cyrix-Li-load 12/24V-120A battery combiner is a microprocessor-controlled enhanced relay that automatically connects the batteries
Available on backorder
-
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VATVictron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VATVictron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron Blue Smart IP65 Charger 6V/12V-1.1 + DC connector Battery Charger
68.54 €
54.27 € Excluding VAT
67.29 € Includes VATVictron Blue Smart IP65 Charger 6V/12V-1.1 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Cyrix-Li-ct 12 / 24V-120A
55.65 €
54.65 € Excluding VAT
67.77 € Includes VATCyrix-Li-ct 12 / 24V-120A
The Cyrix-Li-ct 12/24V-120A Battery Combiner is a microprocessor-controlled enhanced relay that automatically connects batteries
Available on backorder
-
Cyrix-Li-Charge 12/24V-120A
56.05 €
55.05 € Excluding VAT
68.26 € Includes VATCyrix-Li-Charge 12/24V-120A
The Cyrix-Li-Charge 12/24V-120A Battery Combiner is a microprocessor-controlled enhanced relay that automatically connects batteries
Available on backorder
-
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
SpecificationsType MPPT Power (W) 220 (12V) / 440 (24V) Manufacturer VictronEnergy Input voltage (V) 100 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
USB Converter Victron Interface IVI VIC MK2-USB
73.00 €
59.00 € Excluding VAT
73.16 € Includes VATUSB Converter Victron Interface IVI VIC MK2-USB
Price without VAT
Out of stock
-
Cyrix-Li-load 24 / 48V-120A
61.14 €
60.14 € Excluding VAT
74.57 € Includes VATCyrix-Li-load 24 / 48V-120A
The Cyrix-Li-load 24/48V-120A battery combiner is a microprocessor-controlled enhanced relay that automatically connects the batteries
Available on backorder
-
Victron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
72.00 €
61.00 € Excluding VAT
75.64 € Includes VATVictron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron BlueSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A
83.00 €
65.00 € Excluding VAT
80.60 € Includes VATVictron BlueSolar MPPT 100/20 (up to 48V) is a solar charge controller (charge controller) designed for quality photovoltaic systems.
Available on backorder
-
Victron Energy Current Transformer 100A:50mA for MultiPlus-II (20 m)
112.16 €
67.00 € Excluding VAT
83.08 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
Victron MPPT Control (VE.Direct cable not included)
86.00 €
68.00 € Excluding VAT
84.32 € Includes VATVictron MPPT Control (VE.Direct cable not included)
MPPT Control allows you to view the status and configuration of all BlueSolar MPPT charge controllers that have a VE.Direct communication port. The MPPT Control is housed in the already familiar BMV-700 series housing, maintaining a consistent and professional appearance to your panels and system monitoring equipment.
Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Supported Battery Types Bleisäure, AGM, Gel Available on backorder
-
Cyrix-Li-Charge 24/48V-120A
71.20 €
70.20 € Excluding VAT
87.05 € Includes VATCyrix-Li-Charge 24/48V-120A
The Cyrix-Li-Charge 24/48V-120A Battery Combiner is a microprocessor-controlled enhanced relay that automatically connects batteries
Available on backorder
-
Victron SmartSolar MPPT 100/15 - 15A Photovoltaic Charging Regulator
84.00 €
71.00 € Excluding VAT
88.04 € Includes VATVictron SmartSolar MPPT 100/15 - Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
94.00 €
74.00 € Excluding VAT
91.76 € Includes VATVictron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Model Victron BlueSolar MPPT 75/15 Part# SCC010015050R battery voltage 12/24 volt auto select Rated charging current 15A Maximum PV power, 12V (a, b) 200 W (MPPT range 15V to 70V resp. 95V) Maximum PV power, 24V (a, b) 400 W (MPPT range 30V to 70V resp. 95V) Automatic load disconnect Yes, maximum load 15A Maximum PV open circuit voltage 75V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' 14.4V / 28.8V Charge voltage 'float' 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Continuous / peak load current 15A / 50A Low voltage load disconnect 11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm Low voltage load reconnect 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm Available on backorder
-
Victron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
93.47 €
74.37 € Excluding VAT
92.22 € Includes VATVictron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VATCharging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
-
Victron VE.BUS Smart dongle
102.00 €
81.00 € Excluding VAT
100.44 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
97.00 €
82.00 € Excluding VAT
101.68 € Includes VATVictron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
99.00 €
82.00 € Excluding VAT
101.68 € Includes VATVictron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
Using the newest and fastest technology, SmartSolar maximizes energy harvesting and intelligently directs it to achieve full charge in the shortest possible time.
Available on backorder
-
Victron Blue Smart IP65s Charger 12/5 + DC connector Battery Charger
110.00 €
82.75 € Excluding VAT
102.61 € Includes VATVictron Blue Smart IP65s Charger 12/5 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Victron Phoenix 24/250 VE.Direct Schuko * - 24V Pure Sine Inverter 200W for Photovoltaics
105.00 €
83.00 € Excluding VAT
102.92 € Includes VATVictron Phoenix 24/250 VE.Direct Schuko - 24V Pure Sine Inverter 200W for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 24/250 converter - inverter 24VDC - 250VAC 50Hz - 200W, pure sine with maximum power 350W. With VE.Direct connection, possibility of stopping operation in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load.
Excellent professional quality compact and lightweight.Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 24V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Out of stock
-
Blue Power IP22 Charger 24/8 Battery Charger 1 'Output
101.00 €
85.00 € Excluding VAT
105.40 € Includes VATWith up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Available on backorder
-
Charging Regulator Victron Blue Solar MPPT 15A - 12V / 24V
131.00 €
86.00 € Excluding VAT
106.64 € Includes VATCharging Regulator Victron Blue Solar MPPT 15A - 12V / 24V
Price without VAT
Available on backorder
-
Victron Energy-Phoenix 24/180
133.00 €
86.00 € Excluding VAT
106.64 € Includes VATThe Victron Energy-Phoenix 24/180 (180 watt 24 Volt) converter ensures pure sine efficiency, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit.
Price without VAT
Out of stock
-
Victron Energy-Phoenix 12/180
133.00 €
86.00 € Excluding VAT
106.64 € Includes VATΟ Victron Energy-Phoenix 24/180 has: 180 watts 24 Volt Ensures pure sine wave performance, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit. Input Voltage: 21V - 31V DC Continuous output power: 180VA at 25 ° C Continuous power: 175W / 150W at 25 ° C / 40 ° C Starting power: 350W Maximum Efficiency: 88% Cooling: with free ventilation and fan (fan) Protection : output short circuit, overload, low battery voltage, overheating Output: 120V / 50Hz / 60Hz SinusMax. Advanced technology. Developed for professional use, the Phoenix range of converters is suitable for a wide range of applications. The result is a top quality product with compact dimensions. No compromises on performance. It has as its Philosophy the highest quality standards and the decades of experience in the development of innovative constructions that make this possible. With a special compact design that ensures stability, through a user arm. Easy to use and easy to install. Suitable for a variety of applications. Available with easy grip on the move relaxed for the operator.
Price without VAT
Out of stock
-
Phoenix 48/250 VE.Direct NEMA 5-15R
139.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe Victron Phoenix 48/250 VE.Direct (MPN PIN482510200) is a small sinusoidal inverter with a constant output of 200W. Converts 48V DC to 230V AC with pure sine wave, suitable for supply even to sensitive electronic devices. Its level of performance is very high and thanks to the integrated Eco-Mode function one of the best in this category.
Through the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone that allows the configuration of various system parameters, such as the switch on and off the voltage at low battery charge. Other settings such as output frequency or voltage, as well as a bipolar contact-alarm are just some of the features of this converter.
Price without VAT
Available on backorder
-
Phoenix 24/250 VE.Direct NEMA 5-15R
113.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Phoenix 12/250 VE.Direct NEMA 5-15R
113.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Victron Phoenix Inverter 48/250 VE.Direct Schuko * - 48V Inverter 200W Pure Sine for Photovoltaics
118.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Phoenix Inverter VE.Direct 48/250 - 48V Inverter 200W Pure Sine for Photovoltaics
Schuko 48V / 250VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and with high peak power at 400W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Pure Sine Inverter Victron Phoenix VE.Direct 12/250
118.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Battery Charger Blue Power IP22 Charger 24/8 - 3 Outputs
104.00 €
87.00 € Excluding VAT
107.88 € Includes VATAt efficiencies of up to 94%, the heat loss of these chargers is three to four times lower than that of
industry specifications. And once the battery is fully charged, the power consumption is reduced below 0.5 Watt, a value of about
five to ten times lower than the industry specification values.Available on backorder
-
Victron Phoenix 12/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
100.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Phoenix 12/250 VE.Direct Schuko * - Inverter - Clean Halftone Converter 200W for Photovoltaics
Victron Phoenix 12/250 converter - inverter 12VDC - 230VAC 50Hz - 250VA, pure sine with a maximum power of 400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode.
Specifications
Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 12V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 87 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Phoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
128.00 €
87.00 € Excluding VAT
107.88 € Includes VATPhoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Victron Energy Phoenix 12/250 -15 IEC Photovoltaic Inverter
108.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
-
Victron Energy Phoenix 24/250-10 IEC / VE Photovoltaic Inverter
108.00 €
87.00 € Excluding VAT
107.88 € Includes VATWhat is a Victron Phoenix inverter?
The Victron Phoenix Inverter is a multi-purpose inverter designed for stand-alone PV systems. It can be used to power DC loads such as lights and motors, or AC loads such as refrigerators and air conditioners. The Victron Phoenix Inverter is also equipped with an integrated charger, making it ideal for backup power applications.
Available on backorder
-
Victron Energy -Blue Smart IP67 Charger 12/7 (1) Battery Charger
113.80 €
90.77 € Excluding VAT
112.55 € Includes VATVictron Energy -Blue Smart IP67 Charger 12/7 (1) Battery Charger. Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
-
Interface device BMV-60XS IVI VIC
122.00 €
94.00 € Excluding VAT
116.56 € Includes VATInterface device with Data logger and Ethernet remote control system.
Price without VAT
Available on backorder
-
Victron Energy Blue Smart IP67 Charger 24/5 (1) Battery Charger
128.77 €
98.19 € Excluding VAT
121.76 € Includes VATVictron Energy Blue Smart IP67 Charger 24/5(1) Battery Charger
Suitable for any type of battery (Wet, Mf, Vrla, Agm, Gel, Li-Ion). It has Bluetooth functionality to connect to the Victron Connect smartphone app.
- Input voltage 180 ~ 265VAC
- Charging voltage 28,8V / 29,4V / 26.4V
- Charging current: 5A
Available on backorder
-
Victron Energy Blue Smart IP67 Charger 12/7 (1) Battery Charger
130.00 €
98.50 € Excluding VAT
122.14 € Includes VATVictron Energy Blue Smart IP67 Charger 12/7 (1) Battery Charger
- Suitable for batteries: WET/MF/VRLA/AGM/GEL/LI-ION
- Built-in Bluetooth to receive mobile notifications via VictronConnect app
- Charging current: 16A
- Electrical voltage: 24V
- Dimensions: 235 x 108 x 65mm
Available on backorder
-
Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines
119.00 €
100.00 € Excluding VAT
124.00 € Includes VATVictron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Model Victron BlueSolar MPPT 100/30 battery voltage 12/24 volt auto select Rated charging current 30A Maximum PV power, 12V (a, b) 440 W Maximum PV power, 24V (a, b) 880 W Max. PV Short Circuit Current 30A Maximum PV open circuit voltage 100V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V Charge voltage 'float' Adjustable, default = 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, Non-condensing Available on backorder
-
Blue Power IP22 Charger 12/20 Battery Charger (1 Output)
121.00 €
101.60 € Excluding VAT
125.98 € Includes VATWith up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Available on backorder
-
Victron Blue Smart IP65 Charger 12/7 + DC connector Battery Charger
130.00 €
103.00 € Excluding VAT
127.72 € Includes VATVictron Blue Smart IP65 Charger 12/7 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Victron Blue Smart IP65 Charger 24/5 + DC connector Battery Charger
138.00 €
103.00 € Excluding VAT
127.72 € Includes VATVictron Blue Smart IP65 Charger 24/5 + DC connector Battery Charger
- Built-in Bluetooth so you can check the charger and battery status from your smartphone
- The charger is supplied with "crocodile" to facilitate its connection to the battery
- Voltage: 24V
- Charging current: 5A
- Dimensions: 47 x 95 x 190mm
- Weight: 0,8kg
Available on backorder
-
Blue Power IP22 Charger Battery Charger 24/12 - 1 'Output
124.00 €
104.00 € Excluding VAT
128.96 € Includes VATThe highest performance ever achieved!
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. In addition, once the battery is fully charged, power consumption is automatically reduced below 0.5 Watt, a value about five to ten times lower than the industry standard, a feature that makes this charging range one of the best and most reliable on the market.
Price without VAT
Available on backorder
-
Blue Power IP22 Charger 24/12 (3 Outputs)
124.00 €
104.00 € Excluding VAT
128.96 € Includes VATThe highest performance ever achieved!
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. In addition, once the battery is fully charged, power consumption is automatically reduced below 0.5 Watt, a value about five to ten times lower than the industry standard, a feature that makes this charging range one of the best and most reliable on the market.
Price without VAT
Available on backorder
-
Victron Energy -Blue Smart IP67 Charger 12/13 (1) Battery Charger
134.91 €
107.79 € Excluding VAT
133.66 € Includes VATVictron Energy -Blue Smart IP67 Charger 12/13 (1) Battery Charger. Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
-
Victron Phoenix 12/375 VE.Direct Schuko - Pure Sine Inverter 300W for Photovoltaics
141.00 €
110.00 € Excluding VAT
136.40 € Includes VATVictron Phoenix 12/375 VE.Direct Schuko - Pure Sine Inverter 300W for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and high peak power. Suitable for a wide range of applications, capable of providing power, without problems, to any load.
Excellent professional quality compact and lightweight.The line Phoenix of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Specifications
Inverter off Power (W) 300 Manufacturer VictronEnergy Input Voltage (V) 12V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 89 IP protection IP21 Weight (kg) 3.0 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Victron Phoenix 24/375 VE.Direct Schuko * - 24V Pure Sine Inverter 300W for Photovoltaics
138.00 €
110.00 € Excluding VAT
136.40 € Includes VATVictron Phoenix 24/375 VE.Direct Schuko * - 24V Pure Sine Inverter 300W for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 24/375 converter - inverter 24VDC - 375VAC 50Hz - 230VA, pure sine with maximum power 700W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load.
Excellent professional quality compact and lightweight.Available on backorder
-
Phoenix 12/350 NEMA 5-15R socket 111.00 € Excluding VAT
137.64 € Includes VATFully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Price without VAT
Available on backorder
-
Phoenix 48/375 VE.Direct NEMA 5-15R
140.00 €
112.00 € Excluding VAT
138.88 € Includes VATFully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Price without VAT
Available on backorder
-
Phoenix 12/375 VE.Direct NEMA 5-15R
145.00 €
112.00 € Excluding VAT
138.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Victron Phoenix Inverter VE.Direct Schuko * 48/375 - 48V Inverter 300W Pure Sine for Photovoltaics
164.00 €
112.00 € Excluding VAT
138.88 € Includes VATVictron Phoenix Inverter VE.Direct Schuko * 48/375 - 48V Inverter 300W Pure Sine for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 300W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.
Specifications
Inverter off Power (W) 300 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 90 IP protection IP21 Weight (kg) 3.0 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Victron Energy-Phoenix 24/350
153.00 €
112.00 € Excluding VAT
138.88 € Includes VATThe Victron Energy-Phoenix 24/350 (350 watt 24 Volt) converter ensures pure sine efficiency, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit.
Price without VAT
Out of stock
-
Victron Phoenix 12/350 Schuko Outlet*
153.00 €
112.00 € Excluding VAT
138.88 € Includes VATVictron Phoenix 12/350 Schuko Outlet * - Pure Sine Inverter 300W for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and high peak power at 700W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight.
The Victron Energy-Phoenix 12/350 (350 watt 12 Volt) converter ensures pure sine efficiency, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit.
Specifications
Inverter off Power (W) 300 Manufacturer VictronEnergy Input Voltage (V) 12V DC Output Voltage (V) 230V AC Performance level (%) 89 IP protection IP20 Weight (kg) 3.5 Warranty (years) 5 Other Information Automatic transfer switch, Remote on-off switch Out of stock
-
Digital power monitoring panel 200 / 200A GX IVI VIC
145.00 €
112.00 € Excluding VAT
138.88 € Includes VATEasy remote control and monitoring of power supply equipment. Provides the ability to monitor your system and adjust its settings.
Price without VAT
Available on backorder
-
Phoenix 24/375 VE.Direct NEMA 5-15R
150.00 €
112.00 € Excluding VAT
138.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.
Available on backorder
-
Phoenix 48/375 VE.Direct Schuko * - Pure Sine Inverter 300W for Photovoltaics
164.00 €
112.00 € Excluding VAT
138.88 € Includes VATPhoenix 48/375 VE.Direct Schuko * - Pure Sine Inverter 300W for Photovoltaics
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
Specifications
Power (W) 300 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 90 IP protection IP21 Weight (kg) 3.0 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Cyrix-Li-load 12 / 24V-230A
113.06 €
112.06 € Excluding VAT
138.95 € Includes VATCyrix-Li-load 12 / 24V-230A
The Cyrix-Li-load 12/24V-230A battery combiner is a microprocessor-controlled enhanced relay that automatically connects the batteries
Available on backorder
-
Victron Energy Blue Smart IP67 Charger 12/13 (1) Battery Charger
153.00 €
113.00 € Excluding VAT
140.12 € Includes VATVictron Energy Blue Smart IP67 Charger 12/13 (1) Battery Charger
- Suitable for batteries: WET/MF/VRLA/AGM/GEL/LI-ION
- Built-in Bluetooth to receive mobile notifications via VictronConnect app
- Charging current: 16A
- Electrical voltage: 24V
- Dimensions: 235 x 108 x 65mm
Available on backorder
-
Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1)
144.40 €
115.45 € Excluding VAT
143.16 € Includes VATVictron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1). Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
-
Victron SmartSolar MPPT 100/30 - Photovoltaic - Wind Turbine Charging Regulator
137.00 €
116.00 € Excluding VAT
143.84 € Includes VATVictron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
SmartSolar Charge Controller MPPT 100/30 MPPT 100/50 battery voltage 12 / 24V Auto Select Rated charging current 30A 50A Nominal PV power, 12V 1a, b) 440w 700w Nominal PV power, 24V 1a, b) 880w 1400w Maximum PV open circuit voltage 100V Max. PV short circuit current 2) 35A 60A Maximum efficiency 98% Self-consumption 10 mA Charge voltage 'absorption' Default setting: 14,4V / 28,8V / 57,6V (adjustable) Charge voltage 'equalization' 3) Default setting: 16,2V / 28,8V / 64,8V (adjustable) Charge voltage 'float' Default setting: 13,8V / 27,6V / 55,2V (adjustable) Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Temperature compensation -16 mV / ° C resp. -32 mV / ° C Protection Battery reverse polarity (fuse, not user accessible)
Output short circuit, Over temperatureOperating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, non-condensing maximum altitude 5000m (full rated output up to 2000m) Environmental conditions Indoor type 1, unconditioned Pollution degree PD3 Data Communication Port Bluetooth and VE.Direct Available on backorder
-
Blue Power IP22 Charger 12/15 (1)
140.00 €
118.30 € Excluding VAT
146.69 € Includes VATWith up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Available on backorder
-
Cyrix-Li-Charge 12/24V-230A
119.80 €
118.80 € Excluding VAT
147.31 € Includes VATCyrix-Li-Charge 12/24V-230A
The Cyrix-Li-Charge 12/24V-230A Battery Combiner is a microprocessor-controlled enhanced relay that automatically connects batteries.
Available on backorder
-
Cyrix-Li-ct 12/24V-230A splitter
119.80 €
118.80 € Excluding VAT
147.31 € Includes VATCyrix-Li-ct 12/24V-230A splitter
The Cyrix-Li-ct 12/24V-230A Battery Isolator is an enhanced microprocessor controlled relay that automatically connects the batteries
Available on backorder
-
Victron Energy Blue Smart IP22 Charger 12/15 (1) Battery Charger
167.00 €
124.80 € Excluding VAT
154.75 € Includes VATVictron Energy Blue Smart IP22 Charger 12/15 (1) Battery Charger
- Built-in Bluetooth controllable from a mobile smartphone, tablet or laptop via the VictronConnect app
- Designed with a 7-stage charging algorithm for better performance and longer battery life
- Dimensions: 235 x 108 x 65mm
- Weight: 1.4kg
Available on backorder