Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics

29.00 
24.50  Excluding VAT
30.38  Includes VAT

Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.

Specifications

 

Charge Controller Type PWM
System Voltage 12V, 24V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

  ... people are viewing this right now

  Share

Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics

Victron BlueSolar PWM-Light Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.

  • The right amount of charge for lead acid batteries: variable absorption time
  • Battery protection function: prevents possible damage due to excessive gas release
  • Storage mode: less maintenance and aging when the battery is not in use
  • Smaller size and weight compared to similar models
  • Connection NMEA2000 Canbus
  • Power adjustment: setting maximum ground power
  • Remote control Victron BlueSolar PWM-Light
  • Compatible with lithium ion batteries (LiFePo4)

General characteristics : 

  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 20 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 20A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 138x70x37 mm
  • Warranty: 5 Years

Specifications

Charge Controller Type PWM
System Voltage 12V, 24V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

In addition, the Victron BlueSolar PWM-Light prioritizes user safety with built-in protection features such as overload, short circuit and reverse polarity protection, providing peace of mind to both novice and experienced users.

In conclusion, the Victron BlueSolar PWM-Light 12/24V-20A stands out as an efficient, flexible and durable charge controller, making it a valuable accessory for those looking for a reliable solution for solar energy management.

Weight 0.15 kg
Brand

Most viewed products

Recently viewed products

Victron BlueSolar PWM-Light 12/24V-20A - Charge Controller,

Victron BlueSolar PWM-Light 12/24V-20A - Charge Controller,

Victron BlueSolar PWM-Light 12/24V-20A. PWM Battery Charge Controller for your PV, cottage, boat, RV. 5A regulator

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category