Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines

66.00 
56.00  Excluding VAT
69.44  Includes VAT

Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines

Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

Specifications 
 
Type MPPT
Power (W) 220 (12V) / 440 (24V)
Manufacturer VictronEnergy
Input voltage (V) 100
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct

Available on backorder

  ... people are viewing this right now

  Share

Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines

Victron BlueSolar MPPT 100/15 Victron's battery charge controllers, thanks to the technology of quickly finding the maximum power output point (MPPT) from photovoltaic panels, even in shaded conditions, promise the fastest possible charging of the batteries of the stand-alone photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term smooth operation.

They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

Top Features:

  • Extremely fast maximum power efficiency (MPPT) detection
  • Advanced finding of optimal power efficiency in case of partial shading
  • Load output for small models
  • Battery life: intelligent battery management with load cut-off
  • Automatic battery voltage detection
  • Flexible charging algorithm
  • Overheating protection and automatic reduction of output power to protect the device when the temperature is high

Load output
• Limit battery discharge can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery is discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected.
• Load output includes short circuit protection.
Some loads (especially inverters) are best connected directly to the battery, while the remote control of the inverter can be connected to the output of the load.

Battery life: smart battery management
When a solar charge controller is unable to recharge the battery to its full capacity within a day, the result is often that the battery switches between a partially charged and a fully discharged state. This mode (without regular full charge) will damage a lead-acid battery in a matter of weeks or months.

The algorithm that monitors battery life monitors the charge status of the battery and if necessary, day by day may slightly increase the level of charge disconnection (ie charge disconnection may occur earlier) until the solar energy harvest is sufficient for recharging the battery to almost full charge. From that point on, the level of cargo disconnection should be adjusted so that an almost 100% recharge is achieved approximately once each week.

Waterproof, compact housing, low cost
The recognizable blue case of Victron Energy is light (500 g), waterproof and does not raise the temperature. The electronic components of the charger are enclosed in resin, so that they have the best possible protection from harmful external influences. The charge regulator automatically adjusts to 12V or 24V systems.

Color Control Code GX
All battery charge controller VictronEnergy MPPT Charge are compatible with the GX control color code which offers an intuitive control and easy tracking for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and many more products of the company.

VRM Online Portal
In addition to tracking and checking products with the GX control color code, the information can be sent to the tracking website of VICTRON at no extra charge.
Specifications 
 
Type MPPT
Power (W) 220 (12V) / 440 (24V)
Manufacturer VictronEnergy
Input voltage (V) 100
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct
Weight 0.6 kg
Brand

SKU: Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT Categories: , , , , ,

Most viewed products

Recently viewed products

Victron BlueSolar MPPT 100/15 - Charge Controller 15A-MPPT,

Victron BlueSolar MPPT 100/15 - Charge Controller 15A-MPPT,

Victron BlueSolar MPPT 100/15 for your PV, cottage, boat, caravan. Victron BlueSolar MPPT 100/15 Victron BlueSolar MPPT 100/15

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category