Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
Single phase reverse 250W of Victron Energy company with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
The reliability of VICTRON products has been successfully tested for decades in ambulance, fire, police, marine, motorhome and trailer applications and elsewhere. As a specialized company in autonomous energy systems, VICTRON ENERGY has designed products that are characterized by experts in the field as leading in all areas. The variety of specialized products for autonomous systems it is very large, with a special feature being the possibility of networking between them for better programming and control, even from a distance.
The full bridge and toroidal transformer topology has proven its reliability for many years.
The inverters are short-circuit proof and protected against overheating, either due to overload or due to high ambient temperature.
Required to start loads such as power inverters for LED lamps, halogen lamps or power tools.
When in ECO mode, the inverter will go into standby mode when the load drops below a preset value (minimum load: 15W). Once in standby mode, the inverter will turn on for a short time (adjustable, default: every 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain on.
The solar charger ensures that the batteries are charged with energy collected from your solar panels. The charging algorithm is programmable.
The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to remotely turn the inverter on or off. Alternatively, a remote on/off switch can be connected to a bipolar connector or between the battery plus and the left contact of the bipolar plug.
Refer to the manual for description.
Inverter and solar charger parameters can be read, monitored and configured via Bluetooth using the VictronConnect app.
The VE.Direct port can be used to connect to a GX device, the GlobalLink 520 for monitoring via the VRM gateway, or to connect to a PC for monitoring or configuration using the VictronConnect app.
• Inverter input and output voltage and % load
• Solar energy, voltage and current
• Operational status and alarms
• Low battery alarm stop and reset levels
• Low battery voltage cut and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 – 245 V and Frequency 50 Hz or 60 Hz
• Enable/disable ECO mode and ECO mode feeling level
• Battery charging current, algorithm and voltages
• Battery charging temperature compensation or low temperature level reduction
For low power inverters, we recommend the Filax automatic transfer switch. Filax has a very short transition time (less than 20 milliseconds), so computers and other electronic equipment can continue to operate without interruption.
No special cable lugs or tools are needed for installation.
Comes with IEC-320 plug IEC-320 male plug included.
SUN INVERTER | 12/250 | 24/250 | |
Cont. power at 25 °C (1) | 250 VA | ||
Cont. power at 25 °C / 40 °C | 200 W / 175 W | ||
peak power | 400 W | ||
AC output voltage / frequency (adjustable) | 230 Vac +/- 3 % | 50Hz or 60Hz +/- 0.1 % | |
DC input voltage range | 9.2 - 17 V | 18.4 - 34.0 V | |
DC low shut down (adjustable) | 9.3 V | 18.6 V | |
Dynamic (load dependent) DC low shut down | Configurable via the “dynamic cut-off” setting | ||
DC low restart and alarm (adjustable) | 10.9 V | 21.8 V | |
Battery charged detect (adjustable) | 14.0 V | 28.0 V | |
Max. efficiency | 87% | 88% | |
Zero-load power | 4.2 W | 5.2 W | |
Default zero-load power in ECO mode (2) | 0.8 W | 1.3 W | |
Solar charger technology | Pulse Width Modulation (PWM) | ||
Maximum PV voltage current and power | 25V / 15A / 375W | 50V / 10A / 500W | |
Solar panel type | 36 cell solar panels | 72 cell solar panel or two 36 cell solar panels in series | |
Charge voltages | Adjustable and able to be temperature compensated (3) | ||
Protections (4) | a – f | ||
Operating temperature range | -40 to +60 °C (fan assisted cooling) / Output power deration: 1.25 % per °C above 40 °C | ||
Humidity (non-condensing) | max 95% | ||
Bluetooth wireless communication | For remote monitoring and configuration | ||
VE.Direct communication port | For remote monitoring and system integration | ||
ENCLOSURE | |||
Material & Colour | Steel chassis and plastic cover (blue RAL 5012) | ||
Battery connection | Screw terminals, maximum cable cross-section 10 mm² / AWG 8 | ||
PV-connection | Screw terminals, maximum cable cross-section 4 mm² / AWG 12 | ||
Standard AC outlet | IEC-320 (male plug included) | ||
Protection Category | IP 21 | ||
Weight | 2.4 kg / 5.3 lbs | ||
Dimensions (hxwxd) | 86 x 165 x 260 mm / 3.4 x 6.5 x 10.2 inch | ||
ACCESSORIES | |||
Remote on-off | Yes | ||
Automatic transfer switch | Filax | ||
STANDARD | |||
Safety | EN-IEC 60335-1 / EN-IEC 62109-1 | ||
EMC | EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-3 | ||
Automotive Directive | ECE R10-4 EN 50498 | ||
(1) Nonlinear load, crest factor 3:1
(2) The default ECO mode retry interval is 2.5 s. The retry interval, stop power level, and start power level are adjustable. (3) Temperature compensation via an optional "Temperature sensor Quattro, MultiPlus and GX Device" or the "Smart Battery Sense". |
(4) Protection key:
a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high |
Weight | 8.2 kg |
---|
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
New inverter / charger 500VA
The Multi 500VA is a powerful true sine wave inverter, but also an advanced battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single, compact housing.
Proven reliability
The complete bridge topology and the toroidal transformer have proven their reliability for many years.
Ο inverter has short circuit protection and is protected from overheating, whether due to overload or high ambient temperature.
Price without VAT
Available on backorder
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and configuration options offered by Victron using the V.Direct software. With the Hybrid HF Technology application, these converters succeed in successfully combining the highest degree of efficiency with the ability to to support smooth loads with high starting current. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Electronic protections:
Price without VAT
Available on backorder
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 12/1200 converter - inverter 12VDC - 230VAC 50Hz - 1200VA, pure sine wave with maximum power 2400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load. Excellent professional quality compact and lightweight.
Specifications
Manufacturer | VictronEnergy |
---|---|
Constant AC performance | 1000w |
Input Voltage (V DC) | 9,2 17,3V |
Rated output voltage | 230V AC / alternating current |
No-Load Self-Consumption | 8W |
Frequency Range | 50Hz / + -0,1Hz |
quality of power | echte Sinuswelle |
Standby Self-Consumption | 2W |
Temperature Range | -40 ° C to 50 ° C |
IP Protection | IP20 |
Peak Performance | 2400w |
Permitted Humidity | max. 95% RF (not condensing) |
Voltage Control | 12V DC / 230V AC |
Available on backorder
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC power supplies, for example to one ground power source and one generator, or to two generators. The Quattro automatically connects to the active power source.
Two AC outputs
The main output operates as an uninterruptible power supply. The Quattro takes over the power supply of the connected loads in case of failure in the network or when the main power supply / generator is disconnected. This happens almost instantly (in less than 20 milliseconds) so that computers and other electronic devices can continue to run without interruption. The second output is only active when the main AC power supply is available at one of the Quattro inputs. In this way, loads that should not be supplied by the battery in an emergency, such as e.g. a water heater, can be connected to this output.
Price without VAT
In stock
All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
Price without VAT
In stock
Victron Easy Solar 24/3000/70 MPPT 150/70-Inverter Color Control Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.
Available on backorder
VDE-AR-N 4105 and AS / NZS 4777.2 approval (other country specific approvals will follow soon) Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power , and to recharge batteries, either with shore power or an onboard AC generator. The MultiPlus is also the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83 / 2 and G59-3-1 standards).
Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and several other country specific energy storage related standards. The resulting product is the MultiGrid. The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations. The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies, shown in the pictures below. More detail can be found in our Energy Storage brochure.
Price without VAT
Available on backorder
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Specifications
Inverter off | |
---|---|
Power (W) | 700 |
Manufacturer | VictronEnergy |
Input Voltage (V) | 48V DC |
Output Voltage (V) | 230V AC |
Performance level (%) | 94 |
IP protection | IP20 |
Weight (kg) | 6.5 |
Warranty (years) | 5 |
Other Information | Automatic transfer switch, Remote on-off switch |
Available on backorder
The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or secondary supply from a ground source with battery power.
Price without VAT
In stock
Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Price without VAT
Available on backorder
Victron ECOMulti
This is a compact, single box solution which contains a 3kva inverter and 2.3kwh lithium Ion battery. This contains a 50A transfer relay and connects inline between your supply grid and your PV inverter + protected loads.
The main advantage of this is its simple installation and simple operation. However while compact and easy to install… there are no limits in its functionality.
Its main operation is to charge its internal battery from surplus power from the PV system during the day. At night, the ECOMulti disconnects from the grid and runs from battery. If the power requirements are too high, or the battery runs low, then it reconnects to the grid.
Price without VAT
Available on backorder
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
460 watt-465 watt half cell-cut photovoltaic panel, framework for net metering and large autonomous systems
Minimum quantity 6 pieces
Victron -Blue Smart IP65 Charger 12/10 + DC connector Battery Charger. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone
Available on backorder
2 PzS 230PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 230Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 230 [AH] | |
Length | 198 [mm] | |
Width | 47 [mm] | |
Height | 548 [mm] | |
Height with poles | 575 [mm] | |
Weight | 14.000 [kg] | |
Ind | NO |
Applications
In stock
Out of stock
High Power Photovoltaic Panel
Photovoltaic panel Luxor Luxor Eco Line LX-270P / 156-60 + 270W from Luxor polycrystalline silicon with power 260W, suitable for interconnected photovoltaic systems. The panels of the Eco Line series with 60 cells belong to the large diameter photovoltaic panels. The high power makes this series of panels the ideal solution for industrial scale installations, whether it is for outdoor installation, or with a solar tracking system, or for installation on roofs.
Specifications
Cell type | Polycrystalline |
Power (W) | 270 |
Manufacturer | luxor |
Length (cm) | 164.0 |
Height (cm) | 99.2 |
Width (cm) | 4.0 |
Weight (kg) | 18.3 |
Warranty (years) | 12 |
Other Information | Made in Germany – Linked |
5 PzS 775PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 775Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 775 [AH] | |
Length | 198 [mm] | |
Width | 101 [mm] | |
Height | 713 [mm] | |
Height with poles | 740 [mm] | |
Weight | 42.000 [kg] | |
Ind | NO |
In stock
Blue Power IP67 Charger ccompletely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminum and the electronics are molded in resin.
Start interrupt
The models with suffix (1 + Si) feature a second current limited output which is always powered as long as 180 - 265 VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Blue Power IP65 Charger ccompletely encapsulated: waterproof, shockproof and ignition protected. Water, oil or dirt will not damage the Blue Power Charger. The casing is made of cast aluminum and the electronics are molded in resin.
\
Available on backorder
0.50kWh to 0.60kWh with operating voltage 12v DC / 220VAC. Produced energy 24 hours a day during the summer months.
Available on backorder
Waterproof / watertight charge regulator IP 67 LS2024EPD 20A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
In stock
Available on backorder
Not a member? Create an account
Already got an account? sign in here