Import:
Victron Solar Charge Controllers Unlock the full potential of solar energy with Victron solar charge controllers, the epitome of cutting edge technology and performance in solar energy management.
Smart charging for optimal performance
Victron Solar Charge Controllers Victron's solar charge controllers are intelligently designed to ensure that your solar panels are operating at their peak efficiency. These controllers effectively regulate the charging process, preventing overcharging and undercharging to maximize the life of your batteries. With Victron, you can trust that your solar power system will consistently provide reliable power.
Advanced MPPT Technology for Maximum Energy Harvesting
Featuring advanced Maximum Power Point Tracking (MPPT) technology, Victron Solar Charge Controllers dynamically adjust the electrical operating point of your solar panels, extracting maximum power under varying environmental conditions. This results in increased overall energy efficiency, making Victron controllers a smart choice for those seeking efficiency without compromise.
Sturdy construction for durability and reliability
Built with durability in mind, Victron Solar Charge Controllers feature a robust construction that can withstand the rigors of different environmental conditions. Whether installed in a residential rooftop system or an off-grid installation in remote locations, these controllers ensure consistent and reliable solar energy management.
User-friendly monitoring and configuration
Victron makes solar energy management accessible to everyone with user-friendly monitoring and configuration options. The controllers are equipped with intelligent interfaces, allowing users to monitor system performance and easily configure settings for optimal performance. The power of solar energy is literally at your fingertips with Victron.
Seamless integration into the Victron ecosystem
Designed to integrate seamlessly with the wider Victron energy ecosystem, these solar charge controllers complement a range of Victron products including inverters and battery systems. This integration improves overall system performance and offers a complete energy solution for both residential and commercial applications.
In conclusion, the Victron Solar Charge Controllers are the cornerstone of efficient solar energy management, providing users with smart, reliable and user-friendly solutions that enable them to realize the full potential of solar energy. Upgrade your solar system with Victron and experience a new era of energy efficiency.
50 results
-
Victron Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for the BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.Price without VAT
Available on backorder
-
Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for BlueSolar PWM-Pro charge regulators.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-ProAvailable on backorder
-
BlueSolar PWM-Pro to USB interface cable
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATWith the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Available on backorder
-
SCC VIC BlueSolar PWM-Pro to USB interface cable
13.00 €
9.00 € Excluding VAT
11.16 € Includes VATWith the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
19.00 €
16.00 € Excluding VAT
19.84 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
SpecificationsManufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VATVictron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
29.00 €
24.50 € Excluding VAT
30.38 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Price without VAT
Available on backorder
-
Victron SmartSolar Pluggable Display
34.00 €
28.00 € Excluding VAT
34.72 € Includes VATVictron SmartSolar Pluggable Display
The SmartSolar Control display is a plug-in LCD display for SmartSolar charge controllers. Simply remove the rubber seal that protects the connector on the front of the controller and connect the display plug
Available on backorder
-
Remote panel for bluesolar duo
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATPWM controller
Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
Programmable charging current ratio (normal setting: equal current for both batteries)
Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
Internal heat sensor and optional remote control heat sensor
It is protected from overvoltage
It is protected against short circuits
It is protected from reverse polarity of photovoltaic panels and / or batteries.
BlueSolar 12 / 24-10 with timer 10A to 12V or 24VPrice without VAT
Available on backorder
-
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATVictron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
- Battery Voltage: 12 / 24V (Automatic selection)
- Night mode (details in the Remote Panel manual)
- Rated charging current: 30 A
- Second battery output: not available
- Automatic load disconnection: Yes (maximum load 30A)
- Maximum input voltage of PV panel: 28V / 55V
- Self-consumption: <10mA
- Protection: battery reverse polarity, short circuit, overheating
- Operating temperature range -20 to +50 C
- Absorption charge (default): 14.4V (12V) / 28.8V (24V)
- Float charge (default): 13.8V (12V) / 27.6V (24V)
- Equalization charge (default): 14.6V (12V) / 29.2V (24V)
- Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
- Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
- Protection class (dust-humidity): IP 30
- Dimensions: 138x70x37 mm
- Warranty: 5 Years
Available on backorder
-
Remote panel for BlueSolar PWM-Pro
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATDevice for monitoring photovoltaic systems
Programmable The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: - With the help of a computer and software - With the dedicated BlueSolar Pro Remote Panel (see features below).
General characteristics
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable. -
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor. -
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and / or battery.
- Day / night timing options See Remote Panel manual for details
Price without VAT
Available on backorder
-
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VATVictron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type MPPT Power (W) 145 (12V) / 290 (24V) Manufacturer VictronEnergy Input voltage (V) 75 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VATVictron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VATVictron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
SpecificationsType MPPT Power (W) 220 (12V) / 440 (24V) Manufacturer VictronEnergy Input voltage (V) 100 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
Victron BlueSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A
83.00 €
65.00 € Excluding VAT
80.60 € Includes VATVictron BlueSolar MPPT 100/20 (up to 48V) is a solar charge controller (charge controller) designed for quality photovoltaic systems.
Available on backorder
-
Victron MPPT Control (VE.Direct cable not included)
86.00 €
68.00 € Excluding VAT
84.32 € Includes VATVictron MPPT Control (VE.Direct cable not included)
MPPT Control allows you to view the status and configuration of all BlueSolar MPPT charge controllers that have a VE.Direct communication port. The MPPT Control is housed in the already familiar BMV-700 series housing, maintaining a consistent and professional appearance to your panels and system monitoring equipment.
Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Supported Battery Types Bleisäure, AGM, Gel Available on backorder
-
Victron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
94.00 €
74.00 € Excluding VAT
91.76 € Includes VATVictron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Model Victron BlueSolar MPPT 75/15 Part# SCC010015050R battery voltage 12/24 volt auto select Rated charging current 15A Maximum PV power, 12V (a, b) 200 W (MPPT range 15V to 70V resp. 95V) Maximum PV power, 24V (a, b) 400 W (MPPT range 30V to 70V resp. 95V) Automatic load disconnect Yes, maximum load 15A Maximum PV open circuit voltage 75V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' 14.4V / 28.8V Charge voltage 'float' 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Continuous / peak load current 15A / 50A Low voltage load disconnect 11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm Low voltage load reconnect 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm Available on backorder
-
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VATCharging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
-
Victron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
99.00 €
82.00 € Excluding VAT
101.68 € Includes VATVictron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
Using the newest and fastest technology, SmartSolar maximizes energy harvesting and intelligently directs it to achieve full charge in the shortest possible time.
Available on backorder
-
Charging Regulator Victron Blue Solar MPPT 15A - 12V / 24V
131.00 €
86.00 € Excluding VAT
106.64 € Includes VATCharging Regulator Victron Blue Solar MPPT 15A - 12V / 24V
Price without VAT
Available on backorder
-
Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines
119.00 €
100.00 € Excluding VAT
124.00 € Includes VATVictron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Model Victron BlueSolar MPPT 100/30 battery voltage 12/24 volt auto select Rated charging current 30A Maximum PV power, 12V (a, b) 440 W Maximum PV power, 24V (a, b) 880 W Max. PV Short Circuit Current 30A Maximum PV open circuit voltage 100V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V Charge voltage 'float' Adjustable, default = 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, Non-condensing Available on backorder
-
Victron BlueSolar MPPT 150/35 - Charging Regulator 35A-MPPT for Photovoltaic-Wind Turbines
179.00 €
150.00 € Excluding VAT
186.00 € Includes VATVictron BlueSolar MPPT 150/35 - Charging Regulator 35A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
battery voltage 12/24/48 volt auto select, 36 volt software select Rated charging current 35A Maximum PV power, 12/24/36/48 volts 500/1000/1500/2000 Watts Maximum PV open circuit voltage 150V absolute maximum coldest conditions
145V Start-up and Operating MaximumPeak efficiency 98% Self consumption 10mA Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, Non-condensing Data Communication Port VE.Direct Colour Blue (RAL 5012) Power terminals 13 mm² / # 6 AWG Protection Category IP43 (Electronic Components), IP22 (Connection Area) Available on backorder
-
Victron BlueSolar MPPT 100/50 - Charge Regulator 50A-MPPT for Photovoltaic-Wind Turbines
179.00 €
150.00 € Excluding VAT
186.00 € Includes VATVictron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
BlueSolar Charge controller MPPT 100/50 Battery Voltage 12 / 24V auto select Rated charging current A 50 Nominal PV Power, 12 V 1a), 1b) 700 W (MPPT range 15 V to 70 V resp. 95 V) Nominal PV Power, 24 V 1a), 1b) 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V) Maximum PV open circuit voltage 100 V Peak efficiency 98% Self-consumption 10 mA Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable) Charge voltage 'float' 13,8 V / 27,6 V (adjustable) Charge algorithm multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Protection Battery reverse polarity (fuse) / Output short circuit / Over temperature Operating temperature -30 ° C to +60 ° C (full rated output up to 40 ° C) Humidity 95% non-condensing Data Communication Port VE.Direct Available on backorder
-
Blue Power GX IVI VIC power control and management device
223.00 €
172.00 € Excluding VAT
213.28 € Includes VATYour device provides clear and simple information for controlling your systems.
Price without VAT
Available on backorder
-
Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
215.00 €
181.00 € Excluding VAT
224.44 € Includes VATVictron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Model Victron BlueSolar MPPT 150/45-Tr Part# SCC010045200 battery voltage 12/24/48 volt auto select, 36 volt software select Rated charging current 45A Maximum PV power, 12/24/48 volts 650/1300/2600 Watts Maximum PV open circuit voltage 150V absolute maximum coldest conditions
145V Start-up and Operating MaximumPeak efficiency 98% Self consumption 10 mA Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / -32 mV / -68 mV / ° C Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, Non-condensing Data Communication Port VE.Direct Available on backorder
-
Victron SmartSolar MPPT 150/45 – MPPT Charge Controller 45A Photovoltaics
233.00 €
196.00 € Excluding VAT
243.04 € Includes VATVictron SmartSolar MPPT 150/45 – MPPT Charge Controller 45A Photovoltaics
The intelligent functions of an MPPT regulator in terms of battery charging and equalization guarantee better charging and maintenance, resulting in longer battery life
Available on backorder
-
Victron Blue Solar MPPT 40A 12V / 24V
273.00 €
205.00 € Excluding VAT
254.20 € Includes VATCharging Regulator Victron Blue Solar MPPT 40A 12V / 24V
Price without VAT
Available on backorder
-
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
340.00 €
286.00 € Excluding VAT
354.64 € Includes VATVictron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V) Rated charging current A 60 Maximum PV power 12V 1a, b) 860w Maximum PV power 24V 1a, b)
1720w Maximum PV power 48V 1a, b) 3440w Available on backorder
-
Victron BlueSolar MPPT 150/45-MC4 - 45A Photovoltaic Charging Regulator
384.00 €
308.00 € Excluding VAT
381.92 € Includes VATVictron BlueSolar MPPT 150/45-MC4 - Photovoltaic Charging Regulator
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Available on backorder
-
Victron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines
375.00 €
315.00 € Excluding VAT
390.60 € Includes VATVictron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V) Rated charging current A 70 Maximum PV power 12V 1a, b) 1000w Maximum PV power 24V 1a, b)
2000w Maximum PV power 48V 1a, b) 4000w Maximum PV open circuit voltage
150V absolute maximum coldest conditions 145V Start-up and Operating Maximum
Maximum efficiency 98% Information at the link
Available on backorder
-
Victron SmartSolar MPPT 150/60-MC4 – MPPT 60A Photovoltaic Charge Controller
375.00 €
315.00 € Excluding VAT
390.60 € Includes VATVictron SmartSolar MPPT 150/60-MC4 – MPPT 60A Photovoltaic Charge Controller
MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 150/70-Tr VE.Can – MPPT Charge Controller 70A Photovoltaics
443.00 €
372.00 € Excluding VAT
461.28 € Includes VATVictron SmartSolar MPPT 150/60-MC4 – MPPT 60A Photovoltaic Charge Controller
MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 150/85-MC4 VE.Can – MPPT Charge Controller 85A Photovoltaics
494.00 €
415.00 € Excluding VAT
514.60 € Includes VATVictron SmartSolar MPPT 150/85-MC4 VE.Can – MPPT Charge Controller 200A Photovoltaics
MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron BlueSolar MPPT 150/60-MC4 - MPPT Charging Regulator 60A Photovoltaic - Wind Turbines
525.00 €
422.00 € Excluding VAT
523.28 € Includes VATVictron BlueSolar MPPT 150/60-MC4 - MPPT Charging Regulator 60A Photovoltaic - Wind Turbines
Victron MPPT charging regulator, which in this case of cloudy of heaven, when the light radiation changes constantly, will improve energy harvest until 30% compare to Charge Controllers PWM and until 10% compare to slower regulators MPPT. With the system BatteryLife an intelligent battery management system and resin-protected electronic components, protecting them from the environment.
SpecificationsType MPPT Power (W) 12V: 860W / 24V: 1720W / 48V: 3440W Manufacturer VictronEnergy Input voltage (V) 150 Output Voltage (V) 12/24/48 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 3.0 Warranty (years) 5 years Other Information Color Blue (RAL 5012), Two sets of MC4 connectors (PV terminals), 35 mm² / AWG2 (Battery terminals), VE.Direct Available on backorder
-
Victron SmartSolar MPPT 250/70-Tr VE.Can – MPPT Charge Controller 70A Photovoltaics
545.00 €
458.00 € Excluding VAT
567.92 € Includes VATVictron SmartSolar MPPT 250/70-Tr VE.Can – MPPT Charge Controller 70A Photovoltaics
MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 250/70-MC4 VE.Can – MPPT Charge Controller 70A Photovoltaics
545.00 €
458.00 € Excluding VAT
567.92 € Includes VATVictron SmartSolar MPPT 250/70-MC4 VE.Can – MPPT Charge Controller 70A Photovoltaics
Victron Energy charger suitable for installations up to 70A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance
Available on backorder
-
Blue Solar Charging Regulator MPPT 150/70 - 12V / 24/36 / 48V
550.00 €
464.00 € Excluding VAT
575.36 € Includes VATCharging Regulator Victron Blue Solar MPPT 150/70 - 12V / 24/36 / 48V
Price without VAT
Available on backorder
-
Victron SmartSolar MPPT 150/100-MC4 VE.Can – MPPT Charge Controller 100A Photovoltaics
562.00 €
473.00 € Excluding VAT
586.52 € Includes VATVictron SmartSolar MPPT 150/100-MC4 VE.Can – MPPT Charge Controller 100A Photovoltaics
MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 250/85-Tr VE.Can – MPPT Charge Controller 85A Photovoltaics
586.00 €
493.00 € Excluding VAT
611.32 € Includes VATVictron SmartSolar MPPT 250/85-Tr VE.Can – MPPT Charge Controller 85A Photovoltaics
Victron Energy charger suitable for installations up to 85A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 250/85-MC4 VE.Can – MPPT Charge Controller 85A Photovoltaics
596.00 €
501.00 € Excluding VAT
621.24 € Includes VATVictron SmartSolar MPPT 250/85-MC4 VE.Can – MPPT Charge Controller 85A Photovoltaics
Victron Energy charger suitable for installations up to 85A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 250/100-Tr-VE.Can – MPPT 100A Photovoltaic Charge Controller
654.00 €
556.00 € Excluding VAT
689.44 € Includes VATVictron SmartSolar MPPT 250/100-Tr VE.Can – MPPT Charge Controller 100A Photovoltaics
Victron Energy charger suitable for installations up to 100A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 250/100-MC4-VE.Can – MPPT 100A Photovoltaic Charge Controller
664.00 €
558.00 € Excluding VAT
691.92 € Includes VATVictron SmartSolar MPPT 250/100-MC4 VE.Can – MPPT Charge Controller 100A Photovoltaics
Victron Energy charger suitable for installations up to 100A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron BlueSolar MPPT 250/100-Tr VE.Can MPPT 100A Photovoltaic Charge Controller
1,020.00 €
821.00 € Excluding VAT
1,018.04 € Includes VATVictron BlueSolar MPPT 250/100-Tr VE.Can MPPT 100A Photovoltaic Charge Controller
Victron Energy charging regulator suitable for installations up to 100A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics
2,299.00 €
1,932.00 € Excluding VAT
2,395.68 € Includes VATVictron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics
Victron Energy charging regulator suitable for installations up to 200A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder