Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron SmartSolar MPPT 250/100-MC4 VE.Can – MPPT Charge Controller 100A Photovoltaics
Victron Energy charger suitable for installations up to 100A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
Victron SmartSolar MPPT 250/100-MC4-VE The VE.Can SmartSolar MPPT charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery arrays. The SmartSolar charge controller will recharge even a very depleted battery. It can operate with battery voltages down to 0 Volts, provided the cells are not permanently sulphided or otherwise damaged.
MPPT: Ultra fast maximum power tracking
By constantly monitoring the output voltage and current of your solar panels (PV), MPPT technology ensures that every drop of available power is flushed from your panels and collected for storage. The advantage of this is most noticeable when the sky is partly cloudy and the light intensity is constantly changing.
Remote monitoring and control
Remotely control and monitor the charger's extensive capabilities SmartSolar MPPT with built-in Bluetooth, connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere. Both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520 .
Control your charger remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured via Bluetooth via the VictronConnect app. This enables setup, device management and at-a-glance information such as battery voltage and current, PV voltage and current and history data.
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows communication with additional VE.Can SmartSolar chargers. Additional modules are simply 'chained' together with a single RJ45 cable between the individual modules.
When connected together, all individual VE.Can SmartSolar chargers will synchronize their charging stages. They can also send their data, via a single cable, to a GX monitor.
If the GX device is connected to the Internet, the Victron Remote Management Portal ( VRM ) provides access to the full power of your solar charger(s).
For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520 .
Smart solar screen control
The SmartSolar MPPT 250/100-MC4 VE.Can charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or street lighting control. The remote control on/off jack can be controlled externally by a third-party device such as a lithium battery. An optional plug-in LCD /control display provides live data, setup and management, directly from the face of the device.
Model Number. |
|
|||
---|---|---|---|---|
Electrical Data | ||||
Maximum. Solar power input |
|
|||
Maximum. Solar panel open circuit voltage |
|
|||
Maximum. Solar panel short circuit current |
|
|||
Rated system (battery) voltage. |
|
|||
Self consumption |
|
|||
Maximum conversion efficiency |
|
|||
General data | ||||
Dimensions (H/W/D) |
|
|||
Weight |
|
|||
Terminals (wire size) |
|
|||
Balancing charging voltage |
|
|||
Float charging voltage |
|
|||
Charging algorithm | 3 Stage | |||
Charging stages | Absorb, Float, Balance | |||
Temperature Compensation Factor | -16mV/°C@12V, -32mV/°C@24V, -64mV/°C@48V | |||
Protection Category | IP22, IP43 | |||
Operating temperature range | -30~+60℃ | |||
Moisture | 0 - 95% | |||
Maximum. Altitude | 5000 m | |||
Display | liquid crystal display | |||
Subject to local law, you have certain rights regarding the Personal Information we collect, use or disclose and that is related to you, including the right to: | Αγγλικά | |||
Cooling function | Natural | |||
Protection features | ||||
Protection features | Short circuit protection, PV reverse polarity protection, temperature protection |
Victron's MPPT technology is based on a simple principle: when the sun shines, solar panels (photovoltaic panels) generate electricity. This electricity is then used to charge the batteries. When the sun goes down, the batteries provide power to the load.
MPPT stands for maximum power detection. It is an algorithm used to extract the maximum power from the solar panels (photovoltaic panels) and deliver it to the batteries. The MPPT algorithm continuously adjusts the operating voltage of the solar panel to ensure that maximum power is extracted from the panel and supplied to the batteries.
Its MPPT technology Victron designed to work in all climates and weather conditions. It has been tested and proven in some of the most extreme environments on Earth, from the Sahara Desert to Antarctica.
Weight | 4.5 kg |
---|