Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
The Victron VE.Bus BMS protects each individual cell of a Victron Lithium Iron Phosphate (LiFePO4 or LFP) battery.
Available on backorder
The VE.Bus BMS battery management system is designed to interface and protect a single or multiple Victron Smart 12,8V & 25,6V lithium battery (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE communication. Bus. It monitors and protects batteries from over-voltage and under-voltage of any individual cell, as well as over-temperature or under-temperature conditions.
Based on the condition of the battery or batteries, the BMS:
VE.Bus BMS |
|
Input voltage range | 9 – 70V DC |
Current draw, normal operation | 10 mA (excluding Load Disconnect current) |
Current draw, low cell voltage | 2mA |
Load Disconnect output |
Normally high Source current limit: 2A
Sink current: 0 A (output free floating) |
Charge Disconnect output |
Normally high Source current limit: 10mA
Sink current: 0 A (output free floating) |
Pre-alarm output |
Normally free floating
High (Vbat) in case of alarm, max. 1A (not short circuit proof) |
General | |
VE.Bus communication port | Two RJ45 sockets to connect to all VE.Bus products |
Operating temperature | -20 to +50°C 0 – 120°F |
Humidity | Max. 95% (non-condensing) |
Protection grade | IP20 |
ENCLOSURE | |
material and color | ABS, matt black |
Weight | 0,1kg |
Dimensions (hxwxd) | 105 78 x x 32mm |
STANDARD | |
Standards: Safety | EN 60950 |
Emission | EN 61000-6-3, EN 55014-1 |
Immunity | EN 61000-6-2, EN 61000-6-1, EN 55014-2 |
Automotive | Regulation UN/ECE-R10 Rev.4 |
Weight | 3 kg |
---|