674.40 €Original price was: €674.40.528.73 €The current price is: €528.73. + VAT
The 7-panel vertical roof mount is a complete mounting set from the Solar Energy Europe 360 series, for mounting 7 photovoltaic panels on a terrace or flat roof in a vertical (portrait) arrangement. You order one set and get
Η 7 panel vertical terrace base is a complete mounting set of the Solar Energy Europe 360 series, for installing 7 photovoltaic panels on a terrace or flat roof with a vertical (portrait) arrangement. You order a set and receive the profiles, supports and micromaterials of the specific array.
Which installation is it suitable for?
With 7 panels, the array reaches an indicative 2.9–3.5 kWp: the most common size for a residence, covering the annual consumption of a family of four.
What does the 7 panel vertical roof base include?
The set is delivered complete for this particular array: aluminum profiles, roof supports with pre-assembled triangles, panel holding clamps and the necessary stainless steel hardware. You do not need to order anything separately, except for the panels themselves. This version is designed for standard 400-500 Wp panels.
Fixing method
The triangles come pre-assembled and the slope is adjustable from 15° to 30°. A higher slope gives better winter performance and self-cleaning from rain; a lower slope allows for denser rows without mutual shading. Maximum support span up to 2 meters.
Technical characteristics of the terrace base
System: Solar Energy Europe 360
Capacity: 7 panels up to 1,15 m wide and up to 1,80 m high
Material: 6005 aluminum alloy with stainless steel components
Study according to 1, 3, and 9
20 year warranty
Before ordering
Check the dimensions of the panels and the free length of the terrace. The base is supported with ballast instead of piercing the waterproofing — ballast is not included and is calculated per project, based on the wind zone.
Η 7 panel vertical terrace base combined with the solar panels of our catalog. For other sizes see the other bases, and for spare parts the support parts.
The 5 panel tile roof base anchors is a complete support set of the Solar Energy Europe 250 series, for installing 5 photovoltaic panels on a tile roof with a vertical (portrait) arrangement. You order a set and receive
The 6 panel tile roof base anchors is a complete support set of the Solar Energy Europe 250 series, for installing 6 photovoltaic panels on a tile roof with a vertical (portrait) arrangement. You order a set and receive
The 3-panel tile roof mounting bracket is a complete mounting set from the Solar Energy Europe 250 series, for mounting 3 photovoltaic panels on a tile roof in a vertical (portrait) arrangement. You order one set and receive
The 2-panel horizontal tile roof mount is a complete mounting set from the Solar Energy Europe 250 series, for installing 2 photovoltaic panels on a tile roof with a horizontal (landscape) arrangement. You order one set and get
The 2-panel tile roof mounting bracket is a complete mounting set from the Solar Energy Europe 250 series, for mounting 2 photovoltaic panels on a tile roof in a vertical (portrait) arrangement. You order one set and receive
The 5-panel tile roof mounting bracket is a complete mounting set from the Solar Energy Europe 250 series, for mounting 5 photovoltaic panels on a tile roof in a vertical (portrait) arrangement. You order one set and receive
The 4-panel tile roof mounting bracket is a complete mounting set from the Solar Energy Europe 250 series, for mounting 4 photovoltaic panels on a tile roof in a vertical (portrait) arrangement. You order one set and receive
The 2-panel vertical 2,38m roof mount is a complete mounting set from the Solar Energy Europe 360 series, for installing 2 photovoltaic panels on a roof or flat roof in a vertical (portrait) arrangement. You are ordering a set
The 5-panel horizontal tile roof mount is a complete mounting set from the Solar Energy Europe 250 series, for installing 5 photovoltaic panels on a tile roof with a horizontal (landscape) arrangement. You order one set and get
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery (They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kwaveraged per year in Southern regions.
SMA IV SB 5.0-1AV-41 5000 W Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
2v batteries RES 8-SOPzS 1380AH / C120 Sunlight, Greek-made deep discharge company are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum service life according to the manufacturer's specifications is 15 years (Design Life under Float Conditions)
Capacity:
1382Ah / C120
Dimensions: 198mm x 192mm x 613mm (Height 640 mm with poles). Weight 58.1 Kg
Victron Phoenix Inverter VE.Direct 48/250 - 48V Inverter 200W Pure Sine for Photovoltaics
Schuko 48V / 250VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and with high peak power at 400W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.
Specifications
Inverter off
Power (W)
200
Manufacturer
VictronEnergy
Input Voltage (V)
48V DC
Output Voltage (V)
230V AC +/- 3%
Performance level (%)
88
IP protection
IP21K
Weight (kg)
2.4
Warranty (years)
5
Other Information
ECO mode, Remote on / off, LED diagnosis, Dynamic cut off
To provide the best experience, we use technologies such as cookies to store and/or access device information. Consent to these technologies will allow us to process personal data such as browsing behavior or unique identifiers on this website. Non-consent or withdrawal of consent may adversely affect certain functions and features.
Functional
Always active
The technical storage or access is absolutely necessary for the legal purpose of the possibility of using a specific service that is explicitly requested by the subscriber or the user or for the sole purpose of transmitting communication through an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences not requested by the subscriber or user.
Tipsters
The technical storage or access used solely for statistical purposes.The technical storage or access used solely for anonymous statistical purposes. Without a summons, voluntary compliance by the Internet Service Provider, or additional third-party logging, the information stored or retrieved for this purpose on its own may not normally be used for your identification.
Marketing
Technical storage or access is required to create user profiles, to send advertisements or to register the user on a website or websites for similar marketing purposes.
