Victron SmartSolar MPPT 250/70-Tr VE.Can – MPPT Charge Controller 70A Photovoltaics

Victron SmartSolar MPPT 250/70-Tr The company's charger VictronEnergy suitable for installations up to 70A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance. Compared to PWMs that distribute about 80% of the generated energy of the PV Panel to the batteries, the remaining energy of about 20% is lost because simple PWM charge controllers do not detect the maximum power point of the PV panel.

Also, the intelligent functions of an MPPT regulator in terms of charging and equalization of the batteries, guarantee a better charging and maintenance of them, resulting in the extension of their lifetime. Based on the above, MPPT charge controllers are ideal for larger systems where additional energy harvesting of 20% or more is worthwhile and for situations where the solar array voltage is significantly higher than the battery voltage, e.g. using house panels.

Intelligent configuration and analysis via the victron Connect app

Modern smartphones, tablets, Macbooks and other Apple and Android devices can be connected thanks to the permanently integrated Bluetooth module and the free victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all the important parameters like the current solar performance in real time

Automatic detection of the point of maximum power in case of partial shading

In the case of partial shading, there may be two or more maximum power points (mppts) on the current-voltage curve. Conventional mppts tend to install to a local mpp. However, this may not be the optimal mpp. The controller's innovative algorithm SmartSolar it will always maximize power output by adjusting the optimal mpp

Key product features of the Victron SmartSolar MPPT 250/70-Tr VE.Can

• Vitron Energy part number: scc125070210
• max pv power: 12v 1000w / 24v 2000w / 48v 4000w
• max rated charging current 70a, 250v max open circuit voltage pv
• Ultra-fast latest generation mpp tracker ensures best possible performance even in cloudy conditions
• automatic detection of mpp voltage in case of partial shading provides further performance improvement compared to “simple” mppt charge controller
• with optional LCD screen
• permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via the free victron app on compatible devices)
• optional LCD screen available
• built-in vE.Direct data communication port to connect to communicate with additional devices the gx Color control panel or a Smart BMv battery monitor
• breakthrough efficiency of 99%.
• Possibility of parallel operation with other 250/85 controllers
• adjustable constant charging voltage
• adjustable float charging voltage
• suitable for all agm, gel, lead-acid calcium-calcium and lithium batteries
• fully programmable charging algorithms that are later activated and activated manually via a switch on the case
• built-in protection against battery polarity reversal
• multi-stage and adaptive charging algorithm
• can be turned on and off remotely via a 2-pin plug
• Protection class ip 43 for the electronic components and protection class ip 22 for the connection area of ​​the controller
• Built-in temperature sensor balances maintenance and constant charging voltage depending on temperature
• Day/night control and dimming options

Latest generation high speed mpp tracker

Especially in cloudy conditions, when light intensity is constantly changing, an ultra-fast mppt controller improves energy efficiency by up to 30% compared to PwM charge controllers and up to 10% compared to slower mppt controllers

Optional LCD screen available for retrofit

for those who prefer to operate and configure the Smartsolar mppt 250/70-tr directly, the Smartsolar Control scc900600010 display is available for retrofit. The display allows easy configuration of the controller via key input and also provides all important performance data at a glance

Extended electronic protection

• Battery reverse protection
• Reverse Current Locking Pv
• Device overheating protection
• Short circuit protection
• Protection against reverse polarity Pv connection

vE.Direct data communication port

vE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second, offering the possibility to communicate with additional devices such as the gx Color Control system panel. The vE.Direct connection is intended for products where full Canbus integration (vE-Direct) would be too expensive. More information about vE.Direct can be found in our shop under the brand name vitron Energy

Optionally available as a version with MC4 sockets

The 250/70-tr is also available as a version with MC4 plugs on the solar side of the charge controller instead of screw terminals

What are the benefits of a Victron Energy solar charger?

Victron Energy solar chargers are designed to work in all weather conditions and temperature extremes. They have a wide variety of features that make them ideal for use in RVs, boats and cars. Victron Energy solar chargers can keep batteries charged for months at a time, making them ideal for long-term storage.

Victron Energy solar chargers have many advantages that make them an ideal choice for those who want to use renewable energy sources. Some of the benefits of Victron Energy solar chargers include:

1. They are designed to work in all weather conditions and temperature extremes.
2. They have a wide variety of features that make them ideal for use in caravans, boats and cars.
3. Victron Energy solar chargers can keep batteries charged for months at a time, making them ideal for long-term storage.
4. They are easy to install and require little maintenance once installed.
5. It's an environmentally friendly way to power your devices.