230.00 €Original price was: €230.00.130.00 €The current price is: €130.00. without VAT | 161.20 € with VAT
Victron Phoenix Inverter VE.Direct Schuko * 48/500 - 48V Inverter 400W Pure Sine for Photovoltaics
Schuko 48V / 500VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performanceand with high peak power at 900W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.
Specifications
Inverter off
Power (W)
400
Manufacturer
VictronEnergy
Input Voltage (V)
48V DC
Output Voltage (V)
230V AC +/- 3%
Performance level (%)
91
IP protection
IP21K
Weight (kg)
3.9
Warranty (years)
5
Other Information
ECO mode, Remote on / off, LED diagnosis, Dynamic cut off
Victron Phoenix Inverter VE.Direct Schuko * 48/500 - 48V Inverter 400W Pure Sine for Photovoltaics
Victron Phoenix Inverter VE.Direct Schuko * 48/500 - 48V Inverter 400W Pure Sine for Photovoltaics
Schuko 48V / 500VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and with high peak power at 900W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
The door communication VE.Direct can be connected to:
• Computer (VE.Direct with cable USB required)
• Apple and Android smartphones, tablets, MacBooks and other devices (required VE.DirectBluetooth Smart dongle)
Fully customizable:
Battery low voltage audible warning
Disconnect in case of very low battery voltage (cut-off)
Dynamic cut-off: the cut-off level depends on the load
Output voltage 210 - 245V
Frequency 50 Hz or 60 Hz
ECO operation on / off
Supervision
Monitoring the input / output voltage and current and warning signal in case of error
Proven reliability:
The complete bridge and toroidal transformer topology have proven their reliability for many years. Inverters are protected against short circuits and overheating due to overload or high ambient temperatures.
High starting power
Required to start loads, such as power converters for LED bulbs, halogen bulbs or power tools.
ECO function:
During ECO operation, the inverter will enter standby mode when the load drops below a preset value. In standby mode, the inverter will light up for a short time (adjustable, with a default of 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain open.
Remote On / Off:
Possibility of remote control of the operation with the installation of a suitable switch.
Specifications
Inverter off
Power (W)
400
Manufacturer
VictronEnergy
Input Voltage (V)
48V DC
Output Voltage (V)
230V AC +/- 3%
Performance level (%)
91
IP protection
IP21K
Weight (kg)
3.9
Warranty (years)
5
Other Information
ECO mode, Remote on / off, LED diagnosis, Dynamic cut off
Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Blue Solar MPPT 150/60 Tr
Battery Voltage
12/24/48 V Auto Select (software tool needed to select 36V)
The Multi is a powerful sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single compact box. Multi prevents overloading of a source with limited AC voltage. In the event of a fault in the network or if the power is disconnected from the ground source or the generator, the inverter inside the Multi is automatically activated and takes over the power supply of the connected loads.
New inverter / charger 500VA The Multi 500VA is a powerful true sine wave inverter, but also an advanced battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single, compact housing.
Proven reliability The complete bridge topology and the toroidal transformer have proven their reliability for many years. Ο inverter has short circuit protection and is protected from overheating, whether due to overload or high ambient temperature.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
BlueSolar Charge controller
MPPT 100/50
Battery Voltage
12 / 24V auto select
Rated charging current
50 A
Nominal PV Power, 12 V 1a), 1b)
700 W (MPPT range 15 V to 70 V resp. 95 V)
Nominal PV Power, 24 V 1a), 1b)
1400 W (MPPT Bereich 30 V to 70 V bzw. 95V)
Maximum PV open circuit voltage
100 V
Peak efficiency
98%
Self-consumption
10 mA
Charge voltage 'absorption'
14,4 V / 28,8 V (adjustable)
Charge voltage 'float'
13,8 V / 27,6 V (adjustable)
Charge algorithm
multi-stage adaptive
Temperature compensation
-16 mV / ° C resp. -32 mV / ° C
Protection
Battery reverse polarity (fuse) / Output short circuit / Over temperature
Operating temperature
-30 ° C to +60 ° C (full rated output up to 40 ° C)
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
Programmable with night mode
Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
Battery status check function (Remote Panel required)
Night mode (Remote Panel required)
Load output with battery discharge protection, overload protection and short circuit.
Reverse polarity protection of photovoltaic - battery.
Optional external temperature sensor.
Specifications
Manufacturer
VictronEnergy
Charge Controller Type
PWM
System Voltage
12V, 24V
Connectivity
Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Victron Gel 60A Battery 215.00 €Original price was: €215.00.171.00 €The current price is: €171.00. without VAT | 212.04 € with VAT
AGM range batteries are characterized by very low internal resistance, which makes them particularly suitable for high-intensity discharge applications such as inverters, propulsion motors and starting motors.
The range of GEL models provides the best deep cycle durability and longer life.
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
battery voltage
12/24/48 volt auto select, 36 volt software select
Rated charging current
35A
Maximum PV power, 12/24/36/48 volts
500/1000/1500/2000 Watts
Maximum PV open circuit voltage
150V absolute maximum coldest conditions
145V Start-up and Operating Maximum
Victron BlueSolar PWM PRO 10A 29.00 €Original price was: €29.00.23.00 €The current price is: €23.00. without VAT | 28.52 € with VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer
VictronEnergy
Charge Controller Type
PWM
System Voltage
12V, 24V
Connectivity
Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Victron Phoenix 48/800 Schuko outlet * - 48V Inverter 400W Pure Sine for Photovoltaics
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Phoenix 48/1200 NEMA 5-15R socket 486.00 €Original price was: €486.00.233.00 €The current price is: €233.00. without VAT | 288.92 € with VAT
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery (They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kwaveraged per year in Southern regions.
SMA IV SB 5.0-1AV-41 5000 W Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
To provide the best experience, we use technologies such as cookies to store and/or access device information. Consent to these technologies will allow us to process personal data such as browsing behavior or unique identifiers on this website. Non-consent or withdrawal of consent may adversely affect certain functions and features.
Functional
Always active
The technical storage or access is absolutely necessary for the legal purpose of the possibility of using a specific service that is explicitly requested by the subscriber or the user or for the sole purpose of transmitting communication through an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences not requested by the subscriber or user.
Tipsters
The technical storage or access used solely for statistical purposes.The technical storage or access used solely for anonymous statistical purposes. Without a summons, voluntary compliance by the Internet Service Provider, or additional third-party logging, the information stored or retrieved for this purpose on its own may not normally be used for your identification.
Marketing
Technical storage or access is required to create user profiles, to send advertisements or to register the user on a website or websites for similar marketing purposes.
