MultiPlus 12/500 / 20-16 - Pure Sine Inverter 430W for Photovoltaics

MultiPlus 12/500 / 20-16 - Pure Sine Inverter 430W for Photovoltaics

Ο inverter MultiPlus is a powerful sine wave converter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch in a single compact housing.

MultiPlus is compatible with lithium ion batteries. It has dual AC outputs above the main output has uninterrupted operation. When the power exceeds the operating limits it fails, MultiPlus takes over the active loads without interruption. The second output is active only when an AC power source is connected. Charges that can discharge the batteries must be connected to the second output.

Proven reliability
The complete bridge topology and the toroidal transformer have proven their reliability for many years. Ο inverter has short circuit protection and is protected from overheating, whether due to overload or high ambient temperature.

High starting power
Required to start high loads such as power converters for LED bulbs, halogen bulbs or power tools.

Search function
When the search function is activated, the power consumption of the inverter without operating load is reduced by approximately. 70%. In this mode and when the device is operating as an inverter, it switches off in case of lack or very low load, and switches on every two seconds for a short period of time. If the output current exceeds a specified level, o inverter will be put into operation, otherwise will remain idle.

Programmable relay
By default, the programmable relay is set as an alarm relay, ie the relay will switch off in the event of an alarm (inverter too hot, very high ripple at the input, battery voltage too low).

Remote activation / deactivation / charging
Remote operation can be implemented by connecting a switch to the appropriate contact.

 Power control

The MultiPlus is a very powerful battery charger, drawing high currents from the generator or its power (up to 10A per 5kVA Multi at 230 VAC). To prevent generator overload, a current limit can be set via the multifunction control panel. This way the Multiplus will charge the battery in the most convenient way.

power assist

In case the load exceeds the available power, the inverter operation operates in parallel to increase the total available energy and to avoid overload. The MultiPlus is a four-stage adapter charger and the main output provides strong charge to the battery system through advanced "adaptive charging" software. The software automatically adjusts three charging stages to give the battery what it needs and to add a fourth stage for long charging periods.

Specifications