Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Features for EPSOLAR EPEVER-UP-1000W / 12V M3212 New type of smart digital energy storage and management reverseTechnology MPPT, with a maximum tracking efficiency of 99,5% and a maximum DC-DC conversion efficiency of 98,5% Advanced digital control technology for AC-DC charging units SPWM technology, with high efficiency up to 95% With Utility & Solar charge ratio selection function, and total current adjustment charging Four charging modes and two output options Rich set of options Communication via RS485 (Modbus protocol) Extensive electronic protections Wide variety of accessories according to user requirements What are hybrid converters with charger for photovoltaic systems ;How hybrid inverters work with a charger
Power (continuous) | 1000VA / 800W |
Instant Power | 2.000 VA |
Trend | 12 V |
Battery Charging Current | 20 AC |
Built-in Charger Regulator | MPPT 30A, 60maxVoc |
Net weight | 7,3 kg |
Warranty | 1 year |
UPower EPSOLAR EPEVER-UP-1000W / 12V M3212 inverter / charger combines solar charging & utility charging and AC output in one unit, which adopts a multi-core processor
design and advanced MPPT control algorithm for intelligent management. The device is usually used in a remote area where it is
lack of reliable utility, but rich in sunlight.
UP as a reliable industry standard equipment has fast response speed and excellent high performance.
Smart adjustment of the total charging current by both the solar and the utility, the automatic adjustment is done through different work
choice of ways, which ensure the maximum energy supply.
The photovoltaic charging unit adopts the updated optimized MPPT monitoring technology, can quickly monitor the maximum power point
of the photovoltaic array in any environment even has the ability to monitor multiple peaks. MPP tracking speed and power transfer efficiency are
high enough. PV and AC charging current can be adjusted manually, which can meet the total charging current limit and PV & utility load
current ratio distribution. Full electronic protection features are available.
The AC-DC charging unit adopts the advanced MPPT control algorithm, performs fully digital double closed loop control for
voltage and current, with high reliability and response speed. With large AC input voltage range and charge current limiting volume
can be set. This unit has full protection at entry and exit.
The DC-AC converter unit is based on a complete digital and intelligent design. Adopts the advanced SPWM technology, extracts the net
sine wave and converts 24 / 48VDC to 220 / 230VAC, which is suitable for AC loads of household appliances, power tools, commercial
units, electronic audio and video devices, etc.
With the by-by-Utility charging function, the auxiliary unit can supply loads directly and charge the battery
AT THE SAME TIME. In the utility charging mode, the user can select bypass mode or inverter output mode. This feature is preferred
in the area where the utility is not stationary, the user must select the inverter output mode to obtain a constant output voltage to avoid the device
damaged due to poor utility status.
The display module is the key to communication. The 4,2-inch LCD screen shows system status and real-time data, the user can adjust the work
easily configure the 4 buttons. Let the sun provide you with energy
Specifications
A new type of digital intelligent storage and power management Inverter / charger
Utility & Solar charge adjustment function to cover various applications
Advanced MPPT technology to achieve maximum multi-wave power point detection and high monitoring &
conversion efficiency, Max. 99,5% efficiency monitoring, Max. DC-DC conversion factor 98,5%
Advanced digital control is adopted for AC-DC charging units with wide voltage input,
high efficiency and high charging stability Utility
Adoption of advanced SPWM technology, real clean sine wave output, with high efficiency up to 95% ①
and full load efficiency 93% max①
High output voltage stability: when full load is operating in the battery operating voltage range, output voltage
220V / 230V ± 5% ②, frequency 50/60 ± 0.1 Hz. optional voltage & frequency
Advanced multi-loop voltage, current and power control makes DC-AC module have good dynamic response capability
high wave strength and high operational reliability
With Utility & Solar charge ratio selection function, and total current charge setting
Four charging modes: Utility Priority, Solar Priority, Utility & Solar and Solar only
Operation of two outputs: Battery and utility
Utility charging and inverter output can operate simultaneously, avoiding the effect of unstable supply voltage on the load
Rich set of options: charging current, battery type, battery voltage limit, etc.
One-button AC output control, which can activate and activate the Utility or Inverter output, while maintaining the output mode o
convenient in wiring and maintaining power distribution, reducing standby loss
Cold start and smooth start support
RS485 isolated communication interface with 5V 200mA output, EPSOLAR EPEVER-UP-1000W is easy to access communication devices such as Wifi module
PC or mobile APP can be used for remote monitoring, management and configuration to cover various remote users
Optional backlight warning and buzzer option via computer software
With photovoltaic reverse polarity, charge power limit, short circuit, battery reverse polarity protection
With Utility / AC output voltage output, low battery voltage, power limit, current protection and short circuit
With low / overvoltage battery protection and temperature compensation etc.
With internal protection against excessive temperature and intelligent fan start-stop function
A variety of accessories can be selected according to user requirements
①UP1500 and newer models: test result below 25 ° C ambient temperature, rated input voltage and load resistance
Mode In battery discharge mode The output tolerance is 220V ± 5% or 230V -10% ~ + 5% for 24V and 48V input. and 220V -6% ~ + 5% or
230V -10% ~ + 5% with 12V battery input
Weight | 8 kg |
---|---|
Brand |
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Electronic protections:
Price without VAT
Available on backorder
All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
Price without VAT
In stock
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
Victron Easy Solar 24/1600 / 40-16 MPPT 100/50-Inverter Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.
Available on backorder
The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or the secondary supply from a ground source with power coming from the battery. Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC power supplies, for example to one ground power source and one generator, or to two generators. The Quattro automatically connects to the active power source.
Price without VAT
In stock
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
Victron ECOMulti
This is a compact, single box solution which contains a 3kva inverter and 2.3kwh lithium Ion battery. This contains a 50A transfer relay and connects inline between your supply grid and your PV inverter + protected loads.
The main advantage of this is its simple installation and simple operation. However while compact and easy to install… there are no limits in its functionality.
Its main operation is to charge its internal battery from surplus power from the PV system during the day. At night, the ECOMulti disconnects from the grid and runs from battery. If the power requirements are too high, or the battery runs low, then it reconnects to the grid.
Price without VAT
Available on backorder
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 12/1200 converter - inverter 12VDC - 230VAC 50Hz - 1200VA, pure sine wave with maximum power 2400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load. Excellent professional quality compact and lightweight.
Specifications
Manufacturer | VictronEnergy |
---|---|
Constant AC performance | 1000w |
Input Voltage (V DC) | 9,2 17,3V |
Rated output voltage | 230V AC / alternating current |
No-Load Self-Consumption | 8W |
Frequency Range | 50Hz / + -0,1Hz |
quality of power | echte Sinuswelle |
Standby Self-Consumption | 2W |
Temperature Range | -40 ° C to 50 ° C |
IP Protection | IP20 |
Peak Performance | 2400w |
Permitted Humidity | max. 95% RF (not condensing) |
Voltage Control | 12V DC / 230V AC |
Available on backorder
Victron Easy Solar 24/3000/70 MPPT 150/70-Inverter Color Control Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.
Available on backorder
The Victron Phoenix 48/250 VE.Direct (MPN PIN482510200) is a small sinusoidal inverter with a constant output of 200W. Converts 48V DC to 230V AC with pure sine wave, suitable for supply even to sensitive electronic devices. Its level of performance is very high and thanks to the integrated Eco-Mode function one of the best in this category.
Through the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone that allows the configuration of various system parameters, such as the switch on and off the voltage at low battery charge. Other settings such as output frequency or voltage, as well as a bipolar contact-alarm are just some of the features of this converter.
Price without VAT
Available on backorder
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
Combined with the flexibility of a MultiPlus bidirectional converter
The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power, and to recharge batteries, either with shore power or an onboard AC generator.
The MultiPlus is also the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83 / 2 and G59-3-1 standards).
Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and other country specific energy storage related standards.
The resulting product is the MultiGrid.
The MultiGrid fits seamlessly in all common energy storage topologies
There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations.
The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies.
Price without VAT
Available on backorder
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Victron MultiPlus 24 / 1600-40-16
The Victron MultiPlus 24/1600-40-16 new type is intended to replace the previous MultiPlus Compact series. It is a powerful true sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, all in a single compact housing.
Price without VAT
Available on backorder
Goodwe GW120K-HT 600V network inverter for interconnected net metering systems
Available on backorder
Available on backorder
3.6kW On/Off grid inverter V-TAC SKU: 11374 for photovoltaic
Available on backorder
8 PzS 640PB 2V Deep discharge SUNLIGHT battery. Traction battery, open type with liquids, 640Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 640 [AH] | |
Length | 198 [mm] | |
Width | 155 [mm] | |
Height | 408 [mm] | |
Height with poles | 435 [mm] | |
Weight | 35.000 [kg] | |
Ind | NO |
In stock
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Specifications
BlueSolar charge controller | MPPT 150/45 | MPPT 150/60 | MPPT 150/70 | MPPT 150/85 | MPPT 150/100 |
battery voltage | 12/24/48 V Auto Select | ||||
Rated charging current | 45A | 60A | 70A | 85A | 100A |
Maximum PV power | 12V: 650W / 24V: 1300W /
48V: 2600W |
12V: 860W / 24V: 1720W /
48V: 3440W |
12V: 1000W / 24V: 2000W /
48V: 4000W |
12V: 1200W / 24V: 2400W
48V: 4800 W |
12V: 1450W / 24V: 2900W /
48V: 5800W |
Maximum PV open circuit voltage | 150V absolute maximum coldest conditions 145V Start-up and Operating Maximum |
||||
Maximum efficiency | 98% | ||||
Self-consumption | 10 mA | ||||
Charge voltage 'absorption' | Default setting: 14,4 / 28,8 / 43,2 / 57,6 V | ||||
Charge voltage 'float' | Default setting: 13,8 / 27,6 / 41,4 / 55,2 V | ||||
Charge algorithm | multi-stage adaptive | ||||
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | ||||
Data communication port and remote on-off |
VE.Direct | ||||
Operating temperature | -30 ° C à 60 ° C (full rated output up to 40 ° C) | ||||
Humidity (non-condensing) | Max. 95% |
Available on backorder
120AH / 12V deep discharge closed type 10 years service life
For technical information please click on the link.
The price does not include VAT + shipping
Out of stock
Available on backorder
Photovoltaic charge regulator with screen
Battery types: Open type / Closed type with liquids / AGM / Gel
LCD screen black light
Price without VAT
Available on backorder
42AH (C20) 12V Closed type AGM (maintenance free) high fidelity high discharge with a life expectancy of 10-12 years
Ideal use for Autonomous Photovoltaic Systems, UPS, Boats - Yachts (service use), Electric Wheelchairs etc.
Minimum purchase quantity 2 pieces
Price without VAT
Out of stock
Not a member? Create an account
Already got an account? sign in here