Xtender 8000-48

7000VA 48V / with built-in battery charger 0-110A

Price without VAT

Xtender Conergy offers all the functions in one device
a clean sine wave inverter, a highly efficient battery
charger, a powerful transmission system and intelligent amplification
from external energy sources. Excellent possibilities, they pose
new benchmarks and provide unparalleled freedom of use.
Xtender Conergy is the perfect solution for complex
off-grid hybrid systems. It is able to serve all types
energy sources such as photovoltaics, small wind
turbines, diesel generators or the public electricity grid, regardless of the
if it operates as a single- or three-phase generator.
Xtender Conergy offers maximum flexibility in
the AC output, such as output power from 2,5 kVA to 21 kVA (single phase)
and from 7,5 to 63 kVA kVA (three phase) can be achieved
with only one product type. This simplifies the design and
system design of off-grid systems significantly and allows
the system must be ideally adapted to the specific energy requirements

Model

Conergy Conergy Conergy Xtender Conergy 3.000 - 12 Xtender 5000-24 Xtender 6000-48 Xtender 8000 me 48

Inverter

Rated battery voltage 12 V 24 V 48 V 48 V

Input voltage range 9,5 - 17 V 19-34 V 38-68 V 38-68 V

Continuous power at 25 ° C 2.500 VA 4.500 VA 5.000 VA 7.000 VA

Smart power boost 3.000 VA 5.000 VA 6.000 VA 8.000 VA

30 minutes load @ 25 ° C 3.000 VA 5.000 VA 6.000 VA 8.000 VA

5 seconds load @ 25 ° C 3 × Pcont

Maximum load up to short circuit

Maximum asymmetric load up to Pnom

Load detection (in standby mode) 2 to 25 W

Cos φ 0,1-1 are accepted

Maximum efficiency 93% 94% 96% 96%

Open circuit OFF / / standby mode 1,7 W / 2,2 W / 14 W 1,8 W / 2,5 W / 20 W 2.2W / 3 W / 22 W 2,2 W / 3,8 W / 34 W

Sine wave output voltage 230 VAC (+ 0 / -10%) adjustable to 190 - 245 VAC

Output frequency 50 Hz adjustable 45-65 Hz ± 0.05% (quartz controlled)

Harmonic deformation <2%

Overload and short circuit Automatic disconnection after 3 start attempts

Overheating Protection alarm before disconnection and automatic restart

Charger

6-Phase Battery Charger Programmable IU-Uo-Equation-Uo (Low) -U (Magazine)

Adjustable charging current 0-160 0-140 AAA 0-100 0-120 A

Input current distribution system 1-50 A

Maximum input voltage 265 VAC

AC input voltage Level detection range adjustable 150 to 230 VAC

Acceptable input frequency 45-65 Hz

Battery control (factory / adjustable range with RCC-02)

Suction voltage V 14,4 / 9,5 to 18 V 28,8 V / 19-36 V 57,6 V / 38-72 V 57,6 V / V 38-72

Floating voltage 13,6 V / 9,5 - 18 V 27,2 V / 19-36 V 54,4 V / 38-72 V 54,4 V / 38-72 V

Balancing voltage - / 9,5 - 18 V - / 19-36 V - / 38-72 V - / 38-72 V

Low voltage disconnection 10,8 V / 9,5 - 18 V 21,6 V / 19-36 V 43,2 V / 38-72 V 43.2V / 38-72 V

Temperature compensation -5 / zero to -8 mV / ° C / cell (optional BTC-01)

General elements

Auxiliary contacts 2 independent contacts 16 A - 250 VAC (without potential 3 points)

Maximum current transfer relay 50 A

Maximum time transfer 15 ms

Weight 34 kg 40 kg 42 kg 46 kg

Dimensions: Υ x Π x D mm 220 × 290 × 500 220 × 290 × 500 220 × 290 × 500 220 × 310 × 500

IP23 type protection

Compliance EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89/336 / EEC, LVD 73/23 / EEC

Operating temperature range -20 to +55 ° C

Ventilation Forced from 55 ° C

Noise level <10 dB / <35 dB (with / without ventilation)

2 year warranty