Charging regulator VS6024BN 60A PWM-USB

129.00 
119.00  Excluding VAT
147.56  Includes VAT

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Price without VAT

Out of stock

  ... people are viewing this right now

  Share

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Specifications:

  • Rated Voltage 12V / 24V
  • Max load current 60A
  • Input 12V-17V / 24V-34V
  • Over voltage protection 17V / 34V
  • Full charge cut: Adjustable
  • Low voltage cut: Adjustable
  • Temperature compensation -3mv / ° C / cell
  • Self-consumption without load ≤10mA
  • Suitable ambient temperature -25 ° C to + 55 ° C

Functions:

  1. Automatic voltage detection
  2. Suitable for all types of batteries
  3. Regulator with PWM microprocessor
  4. Ability to adjust the cut-off voltage of the loads.
  5. Charging with temperature correction (temperature compensation)
  6. Short circuit protection, overload, etc.

Information at the following link https://www.epsolarpv.com/en/uploads/news/201408/1407810877568156.pdf

 

Features:
· Excellent EMC design
· 32 bit MCU with high speed
· High efficient Series PWM charging
· Four battery type options: Sealed, Gel, Flooded, and USER
· Intelligent lighting and timer control for solar lighting system
· 12 bit A / D high-precision sampling to ensure accuracy
· Use MOSFET as electronic switch
· Full control parameters setting and modification, diversified load control mode
· Humanized design of browser interface, undertake every operating conveniently
· Temperature compensation
· Adopt graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu displaying and operation
· Energy statistics function
· RS485 ports with MODBUS communication protocol
· Optional PC monitoring software and remote meter for real-time monitoring and battery management parameter setting
· Field upgradable firmware

Electronic Protections:
· PV short circuit protection
· PV reverse polarity protection
· Battery overcharge protection
· Battery over discharge protection
· Battery reverse polarity protection
· Load overload protection
· Load short circuit protection
· Overheating protection

 

Specification:

Model VS1024BN VS2024BN VS3024BN VS4524BN VS6024BN
Nominal system voltage 12V 24V Auto work
Rated battery current 10A 20A 30A 45A 60A
Rated load current 10A 20A 30A 45A 60A
Max. battery voltage 32V
Equalize charging voltage Sealed: 14.6V, Flooded: 14.8V, User-defined: 9 ~ 17V
Boost charging voltage Gel: 14.2V,  Sealed: 14.4V,  Flooded: 14.6V, User-defined: 9~17V
Float charging voltage Gel / Sealed / Flooded: 13.8V, User-defined: 9 ~ 17V
Low voltage reconnect voltage Gel / Sealed / Flooded: 12.6V, User-defined: 9 ~ 17V
Low voltage disconnect voltage Gel / Sealed / Flooded: 11.1V, User-defined: 9 ~ 17V
Self-consumption ≤15mA(12V); ≤10mA(24V); ≤9mA(36V); ≤8mA(48V)
Grounding Common negative
Temp. compensation -3mV / C / 2V
Relative humidity 10% ~ 90% Non-condensation
Communication RS485 / RJ45 interface
LCD temperature -20 ~ +70 C
Working temperature -25 ~ + 55C
Humidity ≤95% NC
Enclosure IP30
Overall dimension 162x85x40mm 162x100x50mm 200x103x58mm 201x109x59mm 205x129x67mm
terminals 0.2kg 0.4kg 0.7kg 0.9kg 1.3kg

Price without VAT

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -19%Limited
    Victron 12V/200Ah AGM Telecom Battery (M8), Vehicles, Boats
    Battery Victron 12V/200Ah AGM Telecom (M8) 572.00 
    462.81  Excluding VAT
    573.88  Includes VAT

    Battery Victron 12V/200Ah AGM Telecom (M8)

    Victron 12V/200Ah AGM Telecom battery (M8) designed for telecommunication applications. Excellent "space saver" for marine and vehicle applications.

    Available on backorder

  • -20%Limited
    Autonomous photovoltaic 7,5kWh with 12v 4 batteries 250AH C100 + Inverter charger 3000VA for Air Conditioner + electric iron + vacuum cleaner

    Available on backorder

  • -22%Limited
    Photovoltaics - Hybrid Inverter V-TAC On-Grid Inverter 5000W 11370
    Inverter V-TAC On-Grid Inverter 5000W 11370 Single-phase with LCD display 713.00 
    557.00  Excluding VAT
    690.68  Includes VAT

    Inverter V-TAC On-Grid Inverter 5000W Single Phase with LCD Display 11370

    With order delivery within 2-4 working days.

    Available on backorder

  • -37%Limited
    Sanyo Panasonic photovoltaic panel 214 watts 395.00 
    248.00  Excluding VAT
    307.52  Includes VAT

    Sanyo Panasonic 214 Watt high efficiency photovoltaic.

    SANYO - SOLARMODULE

    HIT - 215 NKHE5

    HIT - 214 NKHE5

    HIT - 210 NKHE5

    SANYO HIT® (Heterojunction with Intrinsic Thin layer) photovoltaic cells consist of two layers of amorphous silicon (top and bottom) and a layer of monocrystalline silicon. PV panels offer top performance and value using advanced technology production techniques.

    Higher Yield

    HIT® cells and panels have a very high degree of photoconversion efficiency in mass production.

    Type Φ / Element hive Φ / Βστοιχείου
    HIP-215NKHE5 19.3% 17,1%
    HIP-214NKHE5 19.2% 17,0%
    HIP-210NKHE5 18,9% 16.7%

    Environmentally friendly photovoltaic cells

    More Clean Energy

    HIT®s produce more clean energy than other conventional photovoltaic cells.

    Special characteristics

    SANYO HIT photovoltaic panels have no emissions, do not consist of common parts and are silent. HIT PV panels save space on the premises and achieve maximum power values ​​on a given roof.

    Module type HIT-215NKHE5 / HIT-214NKHE5 / HIT-210NKHE5
    Electrical components 215NKHE5 214NKHE5 210NKHE5
    Rated Power (Pmax) [W] 215 214 210
    Voltage, max. (Vpm) [V] 42,0 41,9 41,3
    Voltage, max. (lpm) [A] 5,13 5,12 5,09
    Voltageless load (Voc) [V] 51,6 51,5 50,9
    Short-circuit current (Isc) [A] 5,61 5,60 5,57
    Guaranteed minimum power (Pmin) [W] 204,3 203,3 199,5
    Hypertension protection, max. [A] 15 15 15
    Tolerance [%] + 10 / -5 + 10 / -5 + 10 / -5
    System voltage, max. (Vdc) [V] 1000 1000 1000
    Temperature coefficient Pmax [% / ° C] -0,30 -0,30 -0,30
    Temperature coefficient (Voc) [V / ° C] -0,129 -0,129 -0,127
    Temperature coefficient (lsc) [mA / ° C] 1,68 1,68 1,67

    PANASONIC extends the warranty up to 10 years

    Warranty_product10_output25_ENG120329.pdf

     

    Minimum order 12 pieces

    Unit price without VAT

    In stock

  • Victron SmartSolar MPPT 250/100-Tr - MPPT Photovoltaic Charging Regulator 100A 654.00  Excluding VAT
    810.96  Includes VAT

    Victron SmartSolar MPPT 250/100-Tr – MPPT Charge Controller 250V Dc / 100A Solar

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Available on backorder

  • -33%Limited
    2V ECOPVSM 740 Deep Discharge Battery, Open type
    2V ECOPVSM 740 Deep Discharge Battery, Open type 283.00 
    189.00  Excluding VAT
    234.36  Includes VAT

    2V ECOPVSM 740 Deep Discharge Battery, Open type

    The 2V ECOPVSM 740 Deep Discharge Battery, open type is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.

    Capacity: 725Ah / C-100

    Dimensions: 198mm x 101mm x 613mm

    Weight: 31,2 Kgr

     

     

     

    Two year warranty

    Price without VAT.

  • -14%LimitedSOLD OUT
    Airx wings (set) 145.00 
    125.00  Excluding VAT
    155.00  Includes VAT

    Set of three Airx wing spare parts

    Price without VAT

    Out of stock

  • -16%Limited
    Converter Victron inverter-rs-smart-solar-48-6000-mppt-victron-price
    Victron Inverter RS ​​48/6000 Smart Solar-MPPT 1,999.00 
    1,679.00  Excluding VAT
    2,081.96  Includes VAT

    Victron Inverter RS ​​48/6000 Smart Solar has MPPT 450VDC

    Victron Inverter RS ​​48/6000 Smart Solar: The new stage of victron is a combination of a powerful 48VDC converter, 6kVA 230VAC and a high voltage solar charger, 80-450VDC, 4kW MPPT. Thanks to the modern design and high frequency technology, the inverter weighs only 11 kg and has excellent performance, low standby power and very quiet operation.

    Available on backorder

  • -19%Limited
    Victron Energy Phoenix 12/250
    Victron Energy Phoenix 12/250 -15 IEC Photovoltaic Inverter 108.00 
    87.00  Excluding VAT
    107.88  Includes VAT

    Victron Energy Phoenix 12/250

    Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.

    Available on backorder

  • -13%Limited
    24V Autonomous Photovoltaic System Standard 8kwh - 9.7 kwh
    24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh 3,850.00 
    3,334.00  Excluding VAT
    4,134.16  Includes VAT

    24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh

    In stock

REGULATOR 60A VS6024BN FOR PHOTOVOLTAICS,

REGULATOR 60A VS6024BN FOR PHOTOVOLTAICS,

PRICE REGULATOR 60A VS6024BN FOR PHOTOVOLTAIC PURCHASE

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category