Victron Phoenix Inverter VE.Direct Schuko * 48/375 - 48V Inverter 300W Pure Sine for Photovoltaics

Victron Phoenix Inverter VE.Direct Schuko * 48/375 - 48V Inverter 300W Pure Sine for Photovoltaics

Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 300W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.

Using new hybrid high frequency switching technology, the result is a top quality inverter, with compact dimensions, low weight and capable of delivering power smoothly at any load. Schuko 48V / 375VA Inverters with pure sine wave output, high power and.

Victron Phoenix

The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.

• Computer (VE.Direct with cable USB required)
• Apple and Android smartphones, tablets, MacBooks and other devices (required VE.DirectBluetooth Smart dongle)

Fully customizable:

• Battery low voltage audible warning
• Disconnect in case of very low battery voltage (cut-off)
• Dynamic cut-off: the cut-off level depends on the load
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO operation on / off

Supervision
Monitoring the input / output voltage and current and warning signal in case of error

Proven reliability:
The complete bridge and toroidal transformer topology have proven their reliability for many years. Inverters are protected against short circuits and overheating due to overload or high ambient temperatures.

High starting power 
Required to start loads, such as power converters for LED bulbs, halogen bulbs or power tools.

ECO function: 
During ECO operation, the inverter will enter standby mode when the load drops below a preset value. In standby mode, the inverter will light up for a short time (adjustable, with a default of 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain open.

Remote On / Off:
Possibility of remote control of the operation with the installation of a suitable switch.

Specifications