Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

81.00 
69.00  Excluding VAT
85.56  Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

General characteristics:

  1. The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel

 

Available on backorder

  ... people are viewing this right now

  Share

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

Victron BlueSolar PWM PRO BlueSolar PWM-Pro series is ready to use with default settings. It has three stages of battery charging (Bulk, absorption, float), protection against short circuit and over-currents as well as against reverse polarity of the solar panels and/or the battery. These unique functions make the regulator BlueSolar PWM -Pro 12/24V-10A one of the most valuable regulators on the market. Also with the help of the integrated remote control panel BlueSolar Pro can be programmed easily, quickly and correctly.

General characteristics:

  1. The charge regulator BlueSolar PWM -Pro 12/24V-30A is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

  • Code: 05VB122430
  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 30 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 20A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Remote panel: optional
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 200x100x57 mm
  • Warranty: 5 Years

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel
Weight 0.5 kg
Brand

SKU: Victron BlueSolar PWM PRO 12 / 24V-30A-Charging Regulator PWM 30A Categories: , , , , , ,

Most viewed products

Recently viewed products

  • -19%Limited
    Victron 12V/200Ah AGM Telecom Battery (M8), Vehicles, Boats
    Battery Victron 12V/200Ah AGM Telecom (M8) 572.00 
    462.81  Excluding VAT
    573.88  Includes VAT

    Battery Victron 12V/200Ah AGM Telecom (M8)

    Victron 12V/200Ah AGM Telecom battery (M8) designed for telecommunication applications. Excellent "space saver" for marine and vehicle applications.

    Available on backorder

  • -20%Limited
    Autonomous photovoltaic 7,5kWh with 12v 4 batteries 250AH C100 + Inverter charger 3000VA for Air Conditioner + electric iron + vacuum cleaner

    Available on backorder

  • -22%Limited
    Photovoltaics - Hybrid Inverter V-TAC On-Grid Inverter 5000W 11370
    Inverter V-TAC On-Grid Inverter 5000W 11370 Single-phase with LCD display 713.00 
    557.00  Excluding VAT
    690.68  Includes VAT

    Inverter V-TAC On-Grid Inverter 5000W Single Phase with LCD Display 11370

    With order delivery within 2-4 working days.

    Available on backorder

  • -37%Limited
    Sanyo Panasonic photovoltaic panel 214 watts 395.00 
    248.00  Excluding VAT
    307.52  Includes VAT

    Sanyo Panasonic 214 Watt high efficiency photovoltaic.

    SANYO - SOLARMODULE

    HIT - 215 NKHE5

    HIT - 214 NKHE5

    HIT - 210 NKHE5

    SANYO HIT® (Heterojunction with Intrinsic Thin layer) photovoltaic cells consist of two layers of amorphous silicon (top and bottom) and a layer of monocrystalline silicon. PV panels offer top performance and value using advanced technology production techniques.

    Higher Yield

    HIT® cells and panels have a very high degree of photoconversion efficiency in mass production.

    Type Φ / Element hive Φ / Βστοιχείου
    HIP-215NKHE5 19.3% 17,1%
    HIP-214NKHE5 19.2% 17,0%
    HIP-210NKHE5 18,9% 16.7%

    Environmentally friendly photovoltaic cells

    More Clean Energy

    HIT®s produce more clean energy than other conventional photovoltaic cells.

    Special characteristics

    SANYO HIT photovoltaic panels have no emissions, do not consist of common parts and are silent. HIT PV panels save space on the premises and achieve maximum power values ​​on a given roof.

    Module type HIT-215NKHE5 / HIT-214NKHE5 / HIT-210NKHE5
    Electrical components 215NKHE5 214NKHE5 210NKHE5
    Rated Power (Pmax) [W] 215 214 210
    Voltage, max. (Vpm) [V] 42,0 41,9 41,3
    Voltage, max. (lpm) [A] 5,13 5,12 5,09
    Voltageless load (Voc) [V] 51,6 51,5 50,9
    Short-circuit current (Isc) [A] 5,61 5,60 5,57
    Guaranteed minimum power (Pmin) [W] 204,3 203,3 199,5
    Hypertension protection, max. [A] 15 15 15
    Tolerance [%] + 10 / -5 + 10 / -5 + 10 / -5
    System voltage, max. (Vdc) [V] 1000 1000 1000
    Temperature coefficient Pmax [% / ° C] -0,30 -0,30 -0,30
    Temperature coefficient (Voc) [V / ° C] -0,129 -0,129 -0,127
    Temperature coefficient (lsc) [mA / ° C] 1,68 1,68 1,67

    PANASONIC extends the warranty up to 10 years

    Warranty_product10_output25_ENG120329.pdf

     

    Minimum order 12 pieces

    Unit price without VAT

    In stock

  • Victron SmartSolar MPPT 250/100-Tr - MPPT Photovoltaic Charging Regulator 100A 654.00  Excluding VAT
    810.96  Includes VAT

    Victron SmartSolar MPPT 250/100-Tr – MPPT Charge Controller 250V Dc / 100A Solar

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Available on backorder

  • -33%Limited
    2V ECOPVSM 740 Deep Discharge Battery, Open type
    2V ECOPVSM 740 Deep Discharge Battery, Open type 283.00 
    189.00  Excluding VAT
    234.36  Includes VAT

    2V ECOPVSM 740 Deep Discharge Battery, Open type

    The 2V ECOPVSM 740 Deep Discharge Battery, open type is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.

    Capacity: 725Ah / C-100

    Dimensions: 198mm x 101mm x 613mm

    Weight: 31,2 Kgr

     

     

     

    Two year warranty

    Price without VAT.

  • -14%LimitedSOLD OUT
    Airx wings (set) 145.00 
    125.00  Excluding VAT
    155.00  Includes VAT

    Set of three Airx wing spare parts

    Price without VAT

    Out of stock

  • -16%Limited
    Converter Victron inverter-rs-smart-solar-48-6000-mppt-victron-price
    Victron Inverter RS ​​48/6000 Smart Solar-MPPT 1,999.00 
    1,679.00  Excluding VAT
    2,081.96  Includes VAT

    Victron Inverter RS ​​48/6000 Smart Solar has MPPT 450VDC

    Victron Inverter RS ​​48/6000 Smart Solar: The new stage of victron is a combination of a powerful 48VDC converter, 6kVA 230VAC and a high voltage solar charger, 80-450VDC, 4kW MPPT. Thanks to the modern design and high frequency technology, the inverter weighs only 11 kg and has excellent performance, low standby power and very quiet operation.

    Available on backorder

  • -19%Limited
    Victron Energy Phoenix 12/250
    Victron Energy Phoenix 12/250 -15 IEC Photovoltaic Inverter 108.00 
    87.00  Excluding VAT
    107.88  Includes VAT

    Victron Energy Phoenix 12/250

    Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.

    Available on backorder

  • -13%Limited
    24V Autonomous Photovoltaic System Standard 8kwh - 9.7 kwh
    24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh 3,850.00 
    3,334.00  Excluding VAT
    4,134.16  Includes VAT

    24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh

    In stock

Victron BlueSolar PWM PRO Charge Controller PWM 30A,

Victron BlueSolar PWM PRO Charge Controller PWM 30A,

Victron BlueSolar PWM PRO series BlueSolar PWM-Pro is ready to use with default settings. It has three battery charging stages

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category