Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
USB Converter Victron Interface IVI VIC MK2-USB
Price without VAT
Out of stock
An information control and management system for all QUATROs to communicate effectively with their tuning via the USB communication port.
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Your device provides clear and simple information for controlling your systems.
Price without VAT
Available on backorder
Battery monitoring system with 500A shunt and connection kit. With the possibility of monitoring and a second battery.
Price without VAT
Available on backorder
Interface device with Data logger and Ethernet remote control system.
Price without VAT
Available on backorder
Battery 'fuel gauge', time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current and ampere-hours consumed, the battery monitor BMV-700 series
battery monitor BMV-700 series
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Male MC4 (Male) with type Y cable branching and discharge in 2 MC4 Female.
Out of stock
Heat sensor for the BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Price without VAT
Available on backorder
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
Charging regulator cable Communication cable CC-USB-TTL-150U for charge regulators, EPsolar LS-BP, LS-BPL, TRACER-BP, TRACER-BPL, DCCP-DP Solar Controller
Price without VAT
In stock
Type T terminal for connecting (3) three "male" photovoltaic panel plugs to a "Female"
Solar MC4 branch 3 male to 1 female Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.
O rings for secure protection from the elements.
Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Minimum quantity 2 pieces
Price without VAT
In stock
Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Available on backorder
BMV-PC interface for exporting battery charge / discharge data to Excel
Price without VAT
Available on backorder
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on / off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switching on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
In stock
10mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems
Price without VAT
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
Victron 12V/200Ah AGM Telecom battery (M8) designed for telecommunication applications. Excellent "space saver" for marine and vehicle applications.
Available on backorder
Available on backorder
With order delivery within 2-4 working days.
Available on backorder
Sanyo Panasonic 214 Watt high efficiency photovoltaic.
SANYO HIT® (Heterojunction with Intrinsic Thin layer) photovoltaic cells consist of two layers of amorphous silicon (top and bottom) and a layer of monocrystalline silicon. PV panels offer top performance and value using advanced technology production techniques.
HIT® cells and panels have a very high degree of photoconversion efficiency in mass production.
Type Φ / Element | hive | Φ / Βστοιχείου |
---|---|---|
HIP-215NKHE5 | Present in several = 19.3% | Present in several = 17,1% |
HIP-214NKHE5 | Present in several = 19.2% | Present in several = 17,0% |
HIP-210NKHE5 | Present in several = 18,9% | Present in several = 16.7% |
HIT®s produce more clean energy than other conventional photovoltaic cells.
SANYO HIT photovoltaic panels have no emissions, do not consist of common parts and are silent. HIT PV panels save space on the premises and achieve maximum power values on a given roof.
Electrical components | 215NKHE5 | 214NKHE5 | 210NKHE5 |
---|---|---|---|
Rated Power (Pmax) [W] | 215 | 214 | 210 |
Voltage, max. (Vpm) [V] | 42,0 | 41,9 | 41,3 |
Voltage, max. (lpm) [A] | 5,13 | 5,12 | 5,09 |
Voltageless load (Voc) [V] | 51,6 | 51,5 | 50,9 |
Short-circuit current (Isc) [A] | 5,61 | 5,60 | 5,57 |
Guaranteed minimum power (Pmin) [W] | 204,3 | 203,3 | 199,5 |
Hypertension protection, max. [A] | 15 | 15 | 15 |
Tolerance [%] | + 10 / -5 | + 10 / -5 | + 10 / -5 |
System voltage, max. (Vdc) [V] | 1000 | 1000 | 1000 |
Temperature coefficient Pmax [% / ° C] | -0,30 | -0,30 | -0,30 |
Temperature coefficient (Voc) [V / ° C] | -0,129 | -0,129 | -0,127 |
Temperature coefficient (lsc) [mA / ° C] | 1,68 | 1,68 | 1,67 |
Minimum order 12 pieces
Unit price without VAT
In stock
Victron SmartSolar MPPT 250/100-Tr – MPPT Charge Controller 250V Dc / 100A Solar
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Available on backorder
The 2V ECOPVSM 740 Deep Discharge Battery, open type is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.
Capacity: 725Ah / C-100
Dimensions: 198mm x 101mm x 613mm
Weight: 31,2 Kgr
Two year warranty
Price without VAT.
Set of three Airx wing spare parts
Price without VAT
Out of stock
Victron Inverter RS 48/6000 Smart Solar: The new stage of victron is a combination of a powerful 48VDC converter, 6kVA 230VAC and a high voltage solar charger, 80-450VDC, 4kW MPPT. Thanks to the modern design and high frequency technology, the inverter weighs only 11 kg and has excellent performance, low standby power and very quiet operation.
Available on backorder
Victron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
In stock
Not a member? Create an account
Already got an account? sign in here