Phoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics

Phoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics

The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.

The Phoenix range of Victron inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.

The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.

The VE.Direct communication port can be connected to:

• Computer (VE.Direct with USB cable required)
• Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Smart dongle)

Fully customizable:

• Battery low voltage audible warning
• Disconnect in case of very low battery voltage (cut-off)
• Dynamic cut-off: the cut-off level depends on the load
• Output voltage 210 - 245V
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO operation on / off

Supervision

Monitoring the input / output voltage and current and warning signal in case of error

Proven reliability:

The complete bridge and toroidal transformer topology have proven their reliability for many years. Inverters are protected against short circuits and overheating, whether due to overload or high ambient temperature.

High starting power

Required to start loads, such as power converters for LED bulbs, halogen bulbs or power tools.

ECO function:

During ECO operation, the inverter will go into standby mode when the load drops below a preset value. In standby mode, the inverter will light up for a short time (adjustable, with a default of 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain open.

Remote On / Off:

Possibility of remote control of the operation with the installation of a suitable switch.

Specifications