Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
20A MPPT Phocos charge regulator
MPPT includes a sweep-mode that runs through the entire solar panel voltage range once every 2 hours to find the point of absolute maximum output power.
Price without VAT
In stock
20A MPPT Phocos charge regulator
MPPT includes a sweep-mode that runs through the entire solar panel voltage range once every 2 hours to find the point of absolute maximum output power
The three-phase temperature compensation curve IU charge alogarithm regulation significantly extends the life of your battery.
The ability to use less expensive network-feed-in solar panels with up to 95V open circuit voltage for 12V or 24V stand-alone systems will significantly reduce the cost of the overall system.
TYPE | MPPT 100 / 20-1 |
---|---|
Rated Voltage | 12V / 24V, automatic recognition |
Max. Solar Input Voltage Voc |
95V |
Max. PV Input Power |
300W @ 12V, 600W @ 24V |
Max. Battery Charge Current | 20A |
Power Conversion Efficiency | up to 97% |
Standby power consumption |
<30mW at 12V system voltage (<2mA) <80mW at 24V system voltage (<3mA) |
Temperature compensation |
-4 mV / cell * K |
Max. wire size | 32 mm 2 |
Length | 185 150 x x 115mm |
Weight | 1.6kg |
temperature range | -40 to +50 ° C |
Type of protection |
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Phocos MPPT 100/30
With state-of-the-art maximum power detection technology, Phocos' MPP-Tracker ensures maximum performance from your solar panel at all times and in all weathers. MPPT can yield an energy gain of up to 30% from the photovoltaic generator (with an average gain of 10% -25%).
Price without VAT
In stock
20A 12V / 24V
Solar Charge Regulators
Price without VAT
In stock
Charging regulator 12/24 / 48V 60 / 7A LCD data logger
60A digital programmable with multi-voltage control capability
System Energy Regulators
12V, 24V, 32V, 36V and 48V on one controller
Built-in 30 days data logger
Multifunctional LCD screen
External power sensor (optional)
RS232 interface (optional)
Hybrid control system
Widely programmable
Built-in programmable logic
Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range. This allows you to customize the charging system to suit exactly any custom requirements that you, your customer, or your battery manufacturer may have. Of course, in most cases, you can choose from one of our default programs, which cover most types of batteries and systems extremely well.
PL has many other tricks up its sleeves as well. It can control generators, night lights, back-up battery charging, many timer applications and much more!
An integrated LCD display shows battery voltage, charging current Ah, inside and out, charge current, battery temperature (with optional sensor) and more. System performance data is available for the previous 30 days. The controller remembers what happened, even if the user can not.
With the optional PLI interface and PLCom software, the user can access all PL funtions from a remote computer. All data can be read and all settings adjusted.
Because PL can operate 12, 24, 32, 36 and 48V systems and can be adjusted to any battery requirements, you can use PL in almost any battery charging job. It may be the only regulator you will ever need to order. (Higher trends Available on special order).
Character:
• Adjustable: All settings are adjustable and are stored in non-volatile memory, so you do not lose your custom set-up if the unit needs to be disconnected from the battery.
Screen: User-friendly LCD screen. Each number has a label.
• Energy Measurement: Daily load and Ah charge plus member of the charge, all recorded for 30 days
• Four Stage regulations: Boost, Absorption, Float and the equation available depending on the type of battery.
• History: Records Charge and Ah Load, Max / Min .. Battery Trends, SOC, and Float Times for the Last 30 Days. You can tell how much energy was actually collected and used. History can be very helpful in diagnosing a system problem.
• Generator Control: An advanced generator controller is included with four different control modes and a quiet time selection.
• Event Control: A powerful event / timer controller allows the load and / or terminal to be general Purpose to turn on / off a wide range of loads (eg pumps, lights, motors, etc.) according to the user a set of conditions is determined.
• Alarm: There is an adjustable high or low alarm output battery which can drive an external alarm device.
• Secondary battery charge: When the main battery bank is full, PL can provide a signal to change a relay so that all or part of the PV input can charge a secondary battery. Secondary battery charge is also controlled.
• Remote control: With the optional PLM remote control display, all functions can access PL from up to 100 meters away. PLM fits into a standard plate light switch.
• Data Comms: Communication with a computer is possible through the optional PLI RS232 port. This allows all data to be downloaded quickly and settings adjusted. Can be used via modem for remote areas etc.
• Protection: Protection against short circuit, reverse flow and lightning. Low battery disconnect load function built in Current limitation in case of overheating or above current. Complete compliant coating protects against corrosion.
External anastomoses: Up to two external branches can be added using optional DC isolated PLS2 shunt adapters. Converter and / or battery charger and other external currents may be included in the Ah and SOC readings.
• Hybrid Systems: If PL is primarily a device for controlling the charge of batteries with photovoltaic panels, it can also be used with other energy sources, such as wind, hydroelectric power and fuel-generators. PL supports series and bypass control. This allows PL to be used in a number of Solar Hybrid system designs. In hybrid systems, the solar cell can be controlled via the solar input terminal, while the secondary power source (wind, hydroelectric) is controlled by the control parallel to the load or general purpose station.
• Available in 20, 40 and 60A Versions: Using the optional PLA multi-control unit, the user can use up to three PL charge regulators together to work on photovoltaic systems up to 180 Amps. PLA provides a common communication interface, four alarms or control channel outputs, as well as control in a separate load control unit (LS1).
Price without VAT
Out of stock
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
Price without VAT
In stock
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Out of stock
ECO MPPT ES 150V / 40A charge regulator with the possibility of increasing the efficiency up to 30%
Charging regulators ECO MPPT ES 150 / 40A for autonomous photovoltaic systems have a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system up to 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
They are real MPPT charging regulators with 150V open circuit input voltage at 40A and not false MPPT-PWM low voltage
They have a digital operating screen and a built-in datalogger
Circuit protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.
Character:
MPPT photovoltaic charge regulator power 600W - 12V, 1200W - 24V.
Battery voltage 12V / 24V - 40A, photovoltaic voltage 150V, choice of night mode.
Maximum charging current: 40 A.
System voltage: 12/24 V
Price without VAT
Out of stock
MC4 Female MC4 Solar Connector Female for secure data protection.
Price without VAT
Wind turbine 1000 watt - 1100 watt 24v with maximum power / 1500 watt * max / 24v high quality aluminum and Marine type durability for use near the sea.
Price without VAT
Out of stock
5 PzS 700PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 700Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 700 [AH] | |
Length | 198 [mm] | |
Width | 101 [mm] | |
Height | 688 [mm] | |
Weight | 39.300 [kg] | |
Ind | NO |
Applications
In stock
Provides immediacy and ease of adjustment, suitable for small home autonomous photovoltaic systems up to 160 watts / 12v
Increases battery life and installation performance.
Voltage: 12V
Rated Current: 10A
Maximum battery voltage: 16V
Maximum open circuit voltage of PV panel 30V
Price without VAT
Out of stock
5000W mains converter
Special prices for the purchase of more than 3 pieces
With the Sunny Boy Multi-String Converters you can implement photovoltaic installations in the Middle and Upper Power Range with maximum efficiency.
Price without VAT
Available on backorder
WIND GENERATOR ECO Obm 500final match. WATT MAX
The wind turbine ECO Obm 500 with a maximum power of 550W is a very reliable solution able to ensure you a low bill from the electricity provider or autonomy in cases where the electricity grid is not available. The wind turbine with high quality construction materials and state-of-the-art technologies ECO Obm 500 It can generate electricity even in low wind levels while the 20-month warranty that accompanies it ensures its long-term operation without problems and unwanted interruptions.
General characteristics
State-of-the-art materials for reliable and high quality energy production.
Body made of high quality aluminum lining.
Long service life.
High quality materials.
Tested in extreme weather conditions.
Silent mode.
Low construction weight.
Easy installation and operating instructions.
Out of stock
Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
Net-metering & Autonomous 10kw with lithium battery – Consists of
24 PV panels 410 watts / Mono half cells SKU: 11550 x 2 sets V-TAC
Three Phase Hybrid On/Off-Grid Inverter 10KW with LCD Display IP65 V-TAC SKU: 11542 V-TAC
LiFePO4 Rack 9.6KWh 48V 200Ah Lithium Battery for Solar Inverter SKU: 11523 V-TAC
Available on backorder
Not a member? Create an account
Already got an account? sign in here