EPSOLAR XTRA4215N XDS2 CHARGING REGULATOR 40A / 150v

EPSolar – EPEver XTRA4215N is a 40 Amp / 150v MPPT charge controller with a built-in LCD display that can be used to change or adjust charging parameters and display real-time output information. MPPT charge controller: 520W-12V, 1040W-24V with max 1180 watt power The controller can be used with 12 & 24 Volt battery packs. Solar DC input voltage can be anywhere between Battery Voltage + 2 Volts, up to 150 Volts maximum open voltage. The charge controller takes care of converting the voltage down to the battery charging voltage and at the same time the current is converted up proportionally, up to 40 Amp maximum. It is entirely possible to oversize the Solar PV input Wattage, the EP Solar charge controller will simply cut the output at 40 Amps if there is enough sunlight to produce that much (or more). XTRA series charge controllers provide excellent value for money! A USB-to-RS-485 cable can be used to connect the charge controller to a computer. EP Solar has software to monitor and change charge controller settings via PC.
An optional external battery temperature sensor, EP Solar RTS300R47K3.81A , is also available.

If a remote control is required, the MT50 can be used.

A load controller is integrated into the XTRA4215N, to provide a variety of on / off options for the lights (eg dusk on for XX hours, then on and off again YY hours before dawn, until the dawn).

EP Solar sells charge controllers under the "EPEver" brand. This is the name you will see in the box, the charge controllers are all made by EP Solar.

Specifications
- Own consumption less than 0,6 Watt
- Compatible with lead-acid and lithium-ion batteries
- Support for 4 charging options: Sealed, Gel, Flooded and User
- Maximum conversion efficiency 98% and full load efficiency 97,4%
- Built-in screen for displaying working conditions and changing settings
- Wide range of MPP battery operating voltage Voltage + 2 Volts up to 150 Volt DC
- Computer monitoring software is available for real-time data control and configuration
- RS-485, RS-232 communication bus interface and Modbus communication protocol
- 12 & 24 VDC that automatically determines the system voltage or the operating voltage specified by the user
- Advanced Maximum Power Point Tracking (MPPT) technology, with an efficiency of at least 99,5%
- Multiple load control functions: manual control, LIGHT ON / OFF, light on + timer and time control
loads.

The line XTRA-N can display various display modules (XDB1 / XDS1 / XDS2).

With the MPPT (Max Power Point Tracking) the full power of your solar modules is used optimally.

Technical Characteristics: EPSOLAR XTRA4215N XDS2 CHARGING REGULATOR 40A / 150V

MPPT charge regulator: 520W-12V, 1040W-24V
Battery voltage: 12V / 24V
Photovoltaic voltage: 150V
Maximum charging current: 40A
Own power consumption: <20 mA
Type of protection: IP 33
Weight 1.31kg
Dimensions 230x165x63

Electronic protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.