EPSOLAR EPEVER-UP-1000W / 12V M3212 HYBRID INVERTER / CHARGER UPower series

550.00 
419.00  Excluding VAT
519.56  Includes VAT

EPSOLAR EPEVER-UP-1000W / 12V M3212 HYBRID INVERTER / CHARGER UPower series

Available on backorder

  ... people are viewing this right now

  Share

EPSOLAR EPEVER-UP-1000W / 12V M3212 HYBRID INVERTER / CHARGER UPower series

Features for EPSOLAR EPEVER-UP-1000W / 12V M3212 New type of smart digital energy storage and management reverseTechnology MPPT, with a maximum tracking efficiency of 99,5% and a maximum DC-DC conversion efficiency of 98,5% Advanced digital control technology for AC-DC charging units SPWM technology, with high efficiency up to 95% With Utility & Solar charge ratio selection function, and total current adjustment charging Four charging modes and two output options Rich set of options Communication via RS485 (Modbus protocol) Extensive electronic protections Wide variety of accessories according to user requirements What are hybrid converters with charger for photovoltaic systems ;How hybrid inverters work with a charger

 Power (continuous)  1000VA / 800W
 Instant Power  2.000 VA
 Trend  12 V
 Battery Charging Current  20 AC
 Built-in Charger Regulator  MPPT 30A, 60maxVoc
 Net weight  7,3 kg
 Warranty  1 year

UPower EPSOLAR EPEVER-UP-1000W / 12V M3212 inverter / charger combines solar charging & utility charging and AC output in one unit, which adopts a multi-core processor
design and advanced MPPT control algorithm for intelligent management. The device is usually used in a remote area where it is
lack of reliable utility, but rich in sunlight.
UP as a reliable industry standard equipment has fast response speed and excellent high performance.
Smart adjustment of the total charging current by both the solar and the utility, the automatic adjustment is done through different work
choice of ways, which ensure the maximum energy supply.
The photovoltaic charging unit adopts the updated optimized MPPT monitoring technology, can quickly monitor the maximum power point
of the photovoltaic array in any environment even has the ability to monitor multiple peaks. MPP tracking speed and power transfer efficiency are
high enough. PV and AC charging current can be adjusted manually, which can meet the total charging current limit and PV & utility load
current ratio distribution. Full electronic protection features are available.
The AC-DC charging unit adopts the advanced MPPT control algorithm, performs fully digital double closed loop control for
voltage and current, with high reliability and response speed. With large AC input voltage range and charge current limiting volume
can be set. This unit has full protection at entry and exit.
The DC-AC converter unit is based on a complete digital and intelligent design. Adopts the advanced SPWM technology, extracts the net
sine wave and converts 24 / 48VDC to 220 / 230VAC, which is suitable for AC loads of household appliances, power tools, commercial
units, electronic audio and video devices, etc.
With the by-by-Utility charging function, the auxiliary unit can supply loads directly and charge the battery
AT THE SAME TIME. In the utility charging mode, the user can select bypass mode or inverter output mode. This feature is preferred
in the area where the utility is not stationary, the user must select the inverter output mode to obtain a constant output voltage to avoid the device
damaged due to poor utility status.
The display module is the key to communication. The 4,2-inch LCD screen shows system status and real-time data, the user can adjust the work
easily configure the 4 buttons. Let the sun provide you with energy
Specifications
A new type of digital intelligent storage and power management Inverter / charger
Utility & Solar charge adjustment function to cover various applications
Advanced MPPT technology to achieve maximum multi-wave power point detection and high monitoring &
conversion efficiency, Max. 99,5% efficiency monitoring, Max. DC-DC conversion factor 98,5%
Advanced digital control is adopted for AC-DC charging units with wide voltage input,
high efficiency and high charging stability Utility
Adoption of advanced SPWM technology, real clean sine wave output, with high efficiency up to 95% ①
and full load efficiency 93% max①
High output voltage stability: when full load is operating in the battery operating voltage range, output voltage
220V / 230V ± 5% ②, frequency 50/60 ± 0.1 Hz. optional voltage & frequency
Advanced multi-loop voltage, current and power control makes DC-AC module have good dynamic response capability
high wave strength and high operational reliability
With Utility & Solar charge ratio selection function, and total current charge setting
Four charging modes: Utility Priority, Solar Priority, Utility & Solar and Solar only
Operation of two outputs: Battery and utility
Utility charging and inverter output can operate simultaneously, avoiding the effect of unstable supply voltage on the load
Rich set of options: charging current, battery type, battery voltage limit, etc.
One-button AC output control, which can activate and activate the Utility or Inverter output, while maintaining the output mode o
convenient in wiring and maintaining power distribution, reducing standby loss
Cold start and smooth start support
RS485 isolated communication interface with 5V 200mA output, EPSOLAR EPEVER-UP-1000W is easy to access communication devices such as Wifi module
PC or mobile APP can be used for remote monitoring, management and configuration to cover various remote users
Optional backlight warning and buzzer option via computer software
With photovoltaic reverse polarity, charge power limit, short circuit, battery reverse polarity protection
With Utility / AC output voltage output, low battery voltage, power limit, current protection and short circuit
With low / overvoltage battery protection and temperature compensation etc.
With internal protection against excessive temperature and intelligent fan start-stop function
A variety of accessories can be selected according to user requirements
①UP1500 and newer models: test result below 25 ° C ambient temperature, rated input voltage and load resistance
Mode In battery discharge mode The output tolerance is 220V ± 5% or 230V -10% ~ + 5% for 24V and 48V input. and 220V -6% ~ + 5% or
230V -10% ~ + 5% with 12V battery input

Most viewed products

Recently viewed products

  • -16%Limited
    Victron BlueSolar MPPT 100/50 - Charge Regulator 50A-MPPT for Photovoltaic-Wind Turbines 179.00 
    150.00  Excluding VAT
    186.00  Includes VAT

    Victron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines

    Advanced finding of optimal power efficiency in case of partial shading
    Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Specifications

    BlueSolar Charge controller MPPT 100/50
    Battery Voltage 12 / 24V auto select
    Rated charging current A 50
    Nominal PV Power, 12 V 1a), 1b) 700 W (MPPT range 15 V to 70 V resp. 95 V)
    Nominal PV Power, 24 V 1a), 1b) 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V)
    Maximum PV open circuit voltage 100 V
    Peak efficiency 98%
    Self-consumption 10 mA
    Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable)
    Charge voltage 'float' 13,8 V / 27,6 V (adjustable)
    Charge algorithm multi-stage adaptive
    Temperature compensation -16 mV / ° C resp. -32 mV / ° C
    Protection Battery reverse polarity (fuse) / Output short circuit / Over temperature
    Operating temperature -30 ° C to +60 ° C (full rated output up to 40 ° C)
    Humidity 95% non-condensing
    Data Communication Port VE.Direct

    Available on backorder

  • -20%Limited
    Victron Lithium Battery, Lithium SuperPack 25,6V/50Ah (M8)
    Battery Victron Lithium SuperPack 25,6V/50Ah (M8) 1,380.00 
    1,110.00  Excluding VAT
    1,376.40  Includes VAT

    Battery Victron Lithium SuperPack 25,6V/50Ah (M8)

    The Victron Lithium SuperPack 25,6V/50Ah battery is a Lithium battery for a large number of charge and discharge cycles for very long discharge depths.

    Available on backorder

  • -43%LimitedSOLD OUT
    450watt wind turbine 859.00 
    489.00  Excluding VAT
    606.36  Includes VAT

    Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.

    Includes cotroller.

    Price without VAT

     

     

    Out of stock

  • -27%Limited
    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V Battery Charger
    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V Battery Charger 579.48 
    425.00  Excluding VAT
    527.00  Includes VAT

    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V

    • Supports battery technologies (Wet, Mf , Vrla, Agm, Gel, Li-Ion)
    • It has Bluetooth to connect to the Victron Connect app
    • Short circuit, overload and overvoltage protections

    Available on backorder

  • -36%Limited
    Photovoltaic batteries, deep discharge lithium ion lifepo4 Motorhome - motorhome Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah / 1920 Wh
    Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah / 1920 Wh / with bluetooth and smart BMS with 5 YEAR warranty 1,389.00 
    885.00  Excluding VAT
    1,097.40  Includes VAT

    Performance Lithium Battery 1920Wh

    Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah with bluetooth and smart BMS with 5 YEAR warranty

    Minimum order 2 pieces. Delivery 4-6 days from France

  • -29%LimitedSOLD OUT
    5kW PPC Yingli Solar Photovoltaic with Installation 7,042.00 
    5,030.00  Excluding VAT
    6,237.20  Includes VAT

    5kw with photovoltaics on roofs with Yingli Solar 250 watts polycrystalline silicon

    It produces an average of 6500kw per year (for areas of Attica and south) εcovers an area of ​​35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years. 

    Price without VAT

    Out of stock

  • -25%LimitedSOLD OUT
    Etatrack active 1500 2,576.00 
    1,932.00  Excluding VAT
    2,395.68  Includes VAT

    15 square meters covered area

    Price without VAT

     

    Out of stock

  • -23%LimitedSOLD OUT
    OBM ECOAGM 125Ah deep discharge battery 215.60 
    167.00  Excluding VAT
    207.08  Includes VAT

    BATTERY OBM ECOAGM A-125-12 125Ah 12V C100

    The 12V deep discharge batteries OBM ECOAGM 125AH are designed with AGM technology for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electric elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
    accumulator.

    Dimensions:406 * 173 * 209mm
    Weight: 31.4kg

     

    A 2-year warranty is provided

    Price without VAT

     

    Out of stock

  • -27%Limited
    STUDER XTH 5000-24 4,648.00 
    3,399.00  Excluding VAT
    4,214.76  Includes VAT

    5000 VA 24 Vdc 230 Vac / 50 Hz with switching system and integrated 140A battery charger.

    Studer Xtender
    The Studer Xtender converter is the ideal solution for complex hybrid systems. It can be adapted and connected to PV panels, small wind turbines, diesel generators and even the public electricity grid, regardless of whether it operates as a single-phase or three-phase converter.

    Price without VAT

    Available on backorder

  • -19%LimitedSOLD OUT
    ecogel 100 ah ecosun GEL 100ah deep discharge battery for photovoltaic
    ecogel-100ah-battery-deep-cycle GEL photovoltaic batteries
    Deep discharge battery ECO SUN ECOGEL 100Ah, C-100/12V 192.00 
    154.90  Excluding VAT
    192.08  Includes VAT

    BATTERY OBM ECOGEL A-100 12 100 Ah 12V C100

    Deep discharge batteries OBM ECOGEL 100AH is a very reliable and quality battery solution for energy storage systems. The batteries OBM ECOGEL 100AH They provide maximum performance, resistance to overload and deep discharge while their construction is such that it provides them with high resistance to vibrations, vibrations and extreme weather phenomena.

    The 12V deep discharge batteries OBM ECOGEL 100AH are designed with technology GEL (JELL)  for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electrical elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
    accumulator.

    Dimensions:260* 168 * 208mm
    Weight: 23.2kg

    A 2-year warranty is provided

    Price without VAT

    Out of stock

EPSOLAR EPEVER-UP-1000W Unveiling the Power,

EPSOLAR EPEVER-UP-1000W Unveiling the Power,

EPSOLAR EPEVER-UP-1000W Technical data EPSOLAR EPEVER-UP-1000W / 12V M3212 HYBRID INVERTER MPPT technology, for pellet stoves

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category