Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-19%LimitedSOLD OUT
Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB INT Single phase with DC switch - net metering
Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB INT Single phase with DC switch - net metering
Add to Compare Added to Compare

Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB Single phase with DC switch

net-metering-Inverter Network ABB IV UNO-DM-5.0-TL-PLUS-B INT Single phase

Network Inverter ABB IV UNO-DM-5.0-TL-PLUS-B

917.00 € + VAT
Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-B INT Single phase for net metering

Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-B

865.00 € + VAT
1,130.00 €
914.00 € Excluding VAT
1,133.36 € Includes VAT

Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB INT Single Phase  with DC switch

Out of stock

  ... people are viewing this right now
  Share

 

Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB INT Single Phase  with DC switch

net-metering Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB Single-phase without transformer
It has a DC switch for protection against reverse polarity

5-year warranty (possibility of warranty extension at the same time as ordering the machine)
Made in Italy:
The single-phase interconnected network inverter/inverter (on-grid inverter) ABB UNO-DM-4.6-TL-PLUS-SB  is suitable for interconnected photovoltaic net metering system, i.e. energy netting power up to 3,3kW.  net-metering Inverter O  network inverter ABB IV UNO-4.6-TL-PLUS-SB has 2 MPPT inputs for string connection of panels, for maximum possible power production from each string covering cases of different types of tile roof or different orientations.

Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB INT Single Phase

AC Output
Rated AC power: 4600W
Maximum AC power 4600VA
DC Input
Operating voltage range: 120-530V
Rated DC power: 4750W
Dimensions: 553 * 418 * 175mm
Weight: 15Kg

Details

Input (DC)

Maximum input power for each MPPT: 3.000Wp

Rated DC input power (photovoltaic in total): 4.750Wp

Maximum input voltage: 600V

Operating voltage range: 0,7 εκ Starting voltage up to 580V

Rated operating voltage: 360V

Minimum input voltage: 90V

Starting voltage: 200V (adjustable from 120 to 350V)

Voltage range for parallel configuration of MPPT inputs: 150-530V

Input power limit for each MPPT input with their independent configuration: 3000W [190V≤VMPPT≤530V], 3000W [90V≤VMPPT≤530V]

Number of MPPT inputs: 2

Maximum input current for each MPPT input / total: 16A / 32A

Maximum short-circuit current for each MPPT input: 20A

ABB's new Inoper Inverter Inverter UNO-DM-4.6-TL-PLUS-SB is the best solution for home installations. Allows higher performance in minimal space. Easy and fast installation without having to open the inverter cover thanks to the presence of Plug and Play connections. The simple way to set up the device eliminates the need for a long configuration process, resulting in less installation time.

Easy start-up and setup.
Built-in DC switch
Local wireless communication via Smartphone, PC and tablet
Remote communication via Aurora Vision
Connectivity for smart home and Smart grid integration.
Dynamic network feed control (zero feed in).
Wireless firmware upgrade for inverter and components.

Weight 15 kg
Brand

SKU: ABB IV UNO-DM-4.6-TL-PLUS-SB DC Categories: , , , , , , , ,

Related products

-22%Limited
Add to cart
Victron Quattro Pure Sine iInverter
Quattro 48/15000 / 200-100 / 100 - Pure Sine Inverter for Photovoltaics 5,726.00 €
4,459.00 € Excluding VAT
5,529.16 € Includes VAT

Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC power supplies, for example to one ground power source and one generator, or to two generators. The Quattro automatically connects to the active power source.

Two AC outputs
The main output operates as an uninterruptible power supply. The Quattro takes over the power supply of the connected loads in case of failure in the network or when the main power supply / generator is disconnected. This happens almost instantly (in less than 20 milliseconds) so that computers and other electronic devices can continue to run without interruption. The second output is only active when the main AC power supply is available at one of the Quattro inputs. In this way, loads that should not be supplied by the battery in an emergency, such as e.g. a water heater, can be connected to this output.

Price without VAT

In stock

-20%Limited
Add to cart
Quattro 24/3000/70-50/50.
Quattro 24/3000 / 70-50 / 50 - Pure Sine Inverter for Photovoltaics 2,445.00 €
1,965.00 € Excluding VAT
2,436.60 € Includes VAT

The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or secondary supply from a ground source with battery power.

Price without VAT

In stock

-33%Limited
Add to cart
Phoenix 48/800 Schuko outlet.
Victron Phoenix 48/800 Schuko outlet * - 48V Inverter 400W Pure Sine for Photovoltaics 340.00 €
227.00 € Excluding VAT
281.48 € Includes VAT

Victron Phoenix 48/800 Schuko outlet * - 48V Inverter 400W Pure Sine for Photovoltaics

Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.

Specifications 

Inverter off
Power (W) 700
Manufacturer VictronEnergy
Input Voltage (V) 48V DC
Output Voltage (V) 230V AC
Performance level (%) 94
IP protection IP20
Weight (kg) 6.5
Warranty (years) 5
Other Information Automatic transfer switch, Remote on-off switch

Available on backorder

-16%Limited
Add to cart
EasySolar 48/3000/35 MPPT 150/70 Color Control 2,250.00 €
1,900.00 € Excluding VAT
2,356.00 € Includes VAT

All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.

Price without VAT

In stock

-31%Limited
Add to cart
Phoenix 48/500 VE
Phoenix 48/500 VE.Direct NEMA 5-15R 202.00 €
140.00 € Excluding VAT
173.60 € Includes VAT

The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and configuration options offered by Victron using the V.Direct software. With the Hybrid HF Technology application, these converters succeed in successfully combining the highest degree of efficiency with the ability to to support smooth loads with high starting current. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.

Electronic protections:

  • from output short circuit.
  • overload
  • low battery voltage.
  • overheat.

 

Price without VAT

Available on backorder

-20%Limited
Add to cart
Pure Sine Inverter
Pure Sine Inverter Quattro 12/3000 / 120-50 / 50 - Pure Sine Inverter for Photovoltaics 2,224.00 €
1,785.00 € Excluding VAT
2,213.40 € Includes VAT

The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or the secondary supply from a ground source with power coming from the battery. Two AC inputs with integrated transfer switch

The Quattro can be connected to two independent AC power supplies, for example to one ground power source and one generator, or to two generators. The Quattro automatically connects to the active power source.

 

Price without VAT

In stock

-16%Limited
Add to cart
ECOmulti 24/3000 / 70-50 2,3 kWh LiFePO₄ 2,250.00 €
1,900.00 € Excluding VAT
2,356.00 € Includes VAT

Victron ECOMulti

This is a compact, single box solution which contains a 3kva inverter and 2.3kwh lithium Ion battery. This contains a 50A transfer relay and connects inline between your supply grid and your PV inverter + protected loads.

The main advantage of this is its simple installation and simple operation. However while compact and easy to install… there are no limits in its functionality.

Its main operation is to charge its internal battery from surplus power from the PV system during the day. At night, the ECOMulti disconnects from the grid and runs from battery. If the power requirements are too high, or the battery runs low, then it reconnects to the grid.

Price without VAT

Available on backorder

-20%Limited
Add to cart
Victron Pure Sine Wave Inverter
Pure Sine Inverter Victron IVI VIC Multi 48/500 / 6-16 520.00 €
415.00 € Excluding VAT
514.60 € Includes VAT

The Multi is a powerful sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single compact box. Multi prevents overloading of a source with limited AC voltage. In the event of a fault in the network or if the power is disconnected from the ground source or the generator, the inverter inside the Multi is automatically activated and takes over the power supply of the connected loads.

 

Price without VAT

Available on backorder

-23%Limited
Add to cart
Phoenix 24/250 VE.Direct NEMA 5-15R 113.00 €
87.00 € Excluding VAT
107.88 € Includes VAT

The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.

Price without VAT

Available on backorder

-23%Limited
Add to cart
Phoenix 12/375 VE.Direct NEMA 5-15R 145.00 €
112.00 € Excluding VAT
138.88 € Includes VAT

The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.

Price without VAT

Available on backorder

-22%Limited
Add to cart
Phoenix 24/500
Phoenix 24/500 VE.Direct NEMA 5-15R 180.00 €
140.00 € Excluding VAT
173.60 € Includes VAT

Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.

Price without VAT

Available on backorder

-29%Limited
Add to cart
Victron Phoenix 12/1200 VE.Direct
Victron Phoenix 12/1200 VE.Direct Schuko * - Pure Sine Inverter 1200W for Photovoltaics 425.00 €
300.00 € Excluding VAT
372.00 € Includes VAT

Victron Phoenix 12/1200 VE.Direct Schuko * - Pure Sine Inverter 1200W for Photovoltaics

Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 12/1200 converter - inverter 12VDC - 230VAC 50Hz - 1200VA, pure sine wave with maximum power 2400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load. Excellent professional quality compact and lightweight.

Specifications

Manufacturer VictronEnergy
Constant AC performance 1000w
Input Voltage (V DC) 9,2 17,3V
Rated output voltage 230V AC / alternating current
No-Load Self-Consumption 8W
Frequency Range 50Hz / + -0,1Hz
quality of power echte Sinuswelle
Standby Self-Consumption 2W
Temperature Range -40 ° C to 50 ° C
IP Protection IP20
Peak Performance 2400w
Permitted Humidity max. 95% RF (not condensing)
Voltage Control 12V DC / 230V AC

 

Available on backorder

Most viewed products

Recently viewed products

net-metering Inverter ABB IV UNO-DM-4.6-TL,

net-metering Inverter ABB IV UNO-DM-4.6-TL,

net-metering Inverter Installation - net-metering Network Inverter ABB IV UNO-DM-4.6-TL-PLUS-SB Single-phase with DC switch A net-metering inverter

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category