Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Weight | 1 kg |
---|---|
Brand |
PWM controller
Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
Programmable charging current ratio (normal setting: equal current for both batteries)
Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
Internal heat sensor and optional remote control heat sensor
It is protected from overvoltage
It is protected against short circuits
It is protected from reverse polarity of photovoltaic panels and / or batteries.
BlueSolar 12 / 24-10 with timer 10A to 12V or 24V
Price without VAT
Available on backorder
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
Price without VAT
Out of stock
Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
In stock
10mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems
Price without VAT
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Type T terminal for connecting (3) three "Female" photovoltaic panel plugs to a "Male"
Solar MC4 branch 3 female to 1 fmale Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.
O rings for secure protection from the elements.
Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Minimum quantity 2 pieces
Price without VAT
In stock
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on / off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switching on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
In stock
Male MC4 (Male) with type Y cable branching and discharge in 2 MC4 Female.
Out of stock
Type T terminal for connecting (3) three "male" photovoltaic panel plugs to a "Female"
Solar MC4 branch 3 male to 1 female Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.
O rings for secure protection from the elements.
Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Minimum quantity 2 pieces
Price without VAT
In stock
This VE.Direct M8 Cable BNC male – BNC female can be used to extend the cables between a Smart Battery Lithium and the BMS.
Available on backorder
Terminal for connecting two male photovoltaic panel plugs to a Female
Price without VAT
In stock
25mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems & battery connection
Price without VAT
In stock
16mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to exposure to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems & battery connection.
Price without VAT
In stock
Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Available on backorder
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
5kw with photovoltaics on roofs with Yingli Solar 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and south) εcovers an area of 35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Photovoltaic panels 100Watt -105Watt polycrystalline silicon EUROPEAN High efficiency with 12 years factory hardware warranty & 25 years power efficiency guarantee at 80%.
High efficiency
12V DC standard output
CE, TUV junction box
Lifetime: 25 years
Warranty 12 years
90% power 12 years
80% power 25 years
Price without VAT
4mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems
Price without VAT
Available on backorder
15 square meters covered area
Price without VAT
Out of stock
WIND GENERATOR ECO Obm 500final match. WATT MAX
The wind turbine ECO Obm 500 with a maximum power of 550W is a very reliable solution able to ensure you a low bill from the electricity provider or autonomy in cases where the electricity grid is not available. The wind turbine with high quality construction materials and state-of-the-art technologies ECO Obm 500 It can generate electricity even in low wind levels while the 20-month warranty that accompanies it ensures its long-term operation without problems and unwanted interruptions.
General characteristics
State-of-the-art materials for reliable and high quality energy production.
Body made of high quality aluminum lining.
Long service life.
High quality materials.
Tested in extreme weather conditions.
Silent mode.
Low construction weight.
Easy installation and operating instructions.
Out of stock
RENAC NAC5000-DS Macro Series Inverter 5000W, Single-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
5000 VA 24 Vdc 230 Vac / 50 Hz with switching system and integrated 140A battery charger.
Studer Xtender
The Studer Xtender converter is the ideal solution for complex hybrid systems. It can be adapted and connected to PV panels, small wind turbines, diesel generators and even the public electricity grid, regardless of whether it operates as a single-phase or three-phase converter.
Price without VAT
Available on backorder
BATTERY OBM ECOGEL A-100 12 100 Ah 12V C100
Deep discharge batteries OBM ECOGEL 100AH is a very reliable and quality battery solution for energy storage systems. The batteries OBM ECOGEL 100AH They provide maximum performance, resistance to overload and deep discharge while their construction is such that it provides them with high resistance to vibrations, vibrations and extreme weather phenomena.
The 12V deep discharge batteries OBM ECOGEL 100AH are designed with technology GEL (JELL) for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electrical elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
accumulator.
Dimensions:260* 168 * 208mm
Weight: 23.2kg
A 2-year warranty is provided
Price without VAT
Out of stock
Not a member? Create an account
Already got an account? sign in here