Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Price without VAT
PWM charge regulator for photovoltaic installations. Voltage 12/24/36 / 48Volt 30A current. With LCD screen and battery charge adjustment capabilities with time adjustment, overload protection, short circuit and reverse polarity. It has an LCD screen and provides reliable battery charging with full electronic protection.
Digital LCD monitor provides system information (volume, voltage, temperature, etc.) This Epsolar charge regulator is designed for off-grid solar system, such as street light, solar house or small factory, etc.
Specifications
Operating voltage: 12/24/36 / 48V Auto
Operating current: 60A
Working mode: PWM charging
Communication: RS485 / RJ45 interface
Battery type options: Sealed, Gel, Flooded and USER (9-17V)
Scope
Solar home system
Small home lighting system.
Visual lighting.
Small power stations.
Price without VAT
Weight | 0.8 kg |
---|---|
Brand |
The charge regulator for EpSolar photovoltaic panels with LCD screen is suitable for autonomous 12V and 24V systems. The EpSolar VS-AU series of regulators is the new product line that best behaves in system requirements. It also has a dual usb output so you can use them for any use you wish. The use of the most modern charging technologies offered by Epsolar in combination with the determination of the charging status allow you to optimally operate, charge and maintain the battery and monitor the performance of your photovoltaic panels. A very large LCD screen informs the user of all operating modes using symbols. The charging status is represented graphically using a scale. Data such as voltage, current and charge status are represented digitally.
Character:
Night mode selection.
Maximum charging current: 30 A.
System voltage: 12/24 V
Maximum self-consumption: <10 mA
Type of protection: IP 30
Weight: 0,55kg
Information LCD screen black light
Dual USB design, Max. 2.4a output
PWM charge regulator for photovoltaic installations. Voltage 12/24/36 / 48Volt 30A current. With LCD screen and battery charge adjustment capabilities with time adjustment, overload protection, short circuit and reverse polarity. Battery temperature sensor (BTS) included.
Digital LCD monitor provides system information (volume, voltage, temperature, etc.) This Epsolar charge regulator is designed for off-grid solar system, such as street light, solar house or small factory, etc. It has an LCD screen and provides reliable battery charging with full electronic protection.
Specifications
Operating voltage: 12/24/36 / 48V Auto
Operating current: 30A
Working mode: PWM charging
Communication: RS485 / RJ45 interface
Battery type options: Sealed, Gel, Flooded and USER (9-17V)
Dimensions: 201 * 109 * 59mm
Weight: 0.8kg
Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.
Price without VAT
In stock
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 |
Out of stock
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
10A Dual Battery PWM charge regulator for 2 batteries.
Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection
Specification:
Electrical parameters | |
System voltage | 12 / 24VDC Auto work |
Nominal battery current | 10A |
Charge circuit voltage drop | .0.26V |
Discharge circuit voltage drop | .0.15V |
Self consumption | ≤ 6mA |
Working temperature | -35 ℃ to + 55 ℃ |
Humidity | 10% -90% NC |
Enclosure | IP30 |
Port | 4mm2 |
Net weight | 0.15KG |
Price without VAT
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
120AH / 12V 10-12 years Gel life
Out of stock
210 Ah 2V with a lifespan of 12 years
CLUB | TYPE | COUNTRY | R.EKF | R. FORT. A | BAR. | DIMENSIONS (THOUSAND) | EACH VALUE | ||||||
KIDDING | ELEMENT | AH @ 5H | A @ 5H | Arch. | End | M.Y. | Χ | Ψ | Υ | S.Y | € | ||
105 | 2 | EPzS | 210 | 210 | 42 | 34 | 8 | 13,4 | 47 | 198 | 510 | 540 | 58,31 |
price without VAT
In stock
Reliable, efficient and economical pure sine wave inverter.
Rated power: 1000W, Rated Trend: 24V
2 years limited guarantee
The pure sine converter Inverter Ecomomy OBM Asia 1000 watt / 24v offers excellent sine wave quality, designed to operate demanding power tools and sensitive system loads.
Cars, RVs, boats, tractors, trucks, laptops, TVs, video games, CD players, DVD players, power tools, office equipment, large household appliances (refrigerator, kitchen / etc). A powerful Pure Sine Inverter ready to meet your every need
Out of stock
Charging regulator 12/24 / 48V 40 / 7A LCD data logger
40A digital programmable with multi-voltage control capability
Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range.
Price without VAT
In stock
ECO AGM / VRLA battery 220AH C20 & 250AH C100, 12V closed type AGM Long Life maintance free (without maintenance)
Deep discharge of high fidelity with a life expectancy of 10-12 years
Ideal for Solar use in autonomous photovoltaic and hybrid systems, back up applications, UPS, permanent and holiday homes yachts (service use), Electric Wheelchairs, wifi transponders & mobile telephony etc.
Price without VAT
30Wp / 12v Polycrystalline silicon. It has an aluminum frame
Price without VAT
Out of stock
3.5KW-Pure Sine Hybrid Inverter 3.5kw/3500W 24V & Charge Controller 30-80A China
In stock
6.5kwh-7.5kwh / 24v / 220AC - 24V Europe Premium Photovoltaic System (5 year warranty *)
24V Photovoltaics Europe Premium with deep discharge batteries and life expectancy of 10-12 years
System analysis 6.5kwh-7.5kwh (24 hours a day during the summer months).
For a similar performance in Winter, double panels or a 450-500 wind turbine are required. watt
Appliances: Energy class A refrigerator Medium, ECO Medium Washing Machine (up to 1200watt) + Lighting + 8 lamps + TV + small appliances 550wh
4 pcs. Φ/Β panel Solar Energy SE 330 / 330-335 watts Poly / European.
4 pcs. Batteries S. Energy ECOGEL 250 (250AH C20 / 280AH C100) type GEL batteries. (1250 cycles DOD 50%)
1 pc. pure sine wave inverter Phoenix Inverter C 24/2000
2 pcs. Charging regulator ECO ES 150 / 30A programmable 150V with digital display (2 year warranty).
Photovoltaic support bases
Price without VAT
Out of stock
The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or secondary supply from a ground source with battery power.
Price without VAT
In stock
Available upon order from Victron Netherlands within 7-9 working days
In stock
Not a member? Create an account
Already got an account? sign in here