Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron Temperature sensor for BlueSolar PWM-Pro
8.00 € Excluding VAT
9.92 € Includes VAT
Heat sensor for the BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Price without VAT
Available on backorder
... people are viewing this right now
Victron Temperature sensor for BlueSolar PWM-Pro
Victron Energy is a renowned name in the field of renewable energy solutions and BlueSolar PWM-Pro charge controllers stand out as reliable and efficient components for solar power systems. To enhance the functionality of these controllers, Victron offers a specialized accessory – the temperature sensor Victron.
The Victron temperature sensor is a critical addition to the BlueSolar PWM-Pro charge controller, designed to optimize charging parameters based on real-time temperature conditions. This sensor plays a vital role in ensuring the longevity and performance of your battery by allowing the charge controller to make temperature compensated charging decisions.
One of the key features of the temperature sensor Victron is its compatibility with BlueSolar PWM-Pro charge controllers. This integration enables seamless communication between the sensor and the controller, creating a dynamic system that adapts to environmental changes. The sensor measures the ambient temperature and transmits this information to the charge controller, which then adjusts the charge voltage accordingly.
Temperature compensation is essential in solar power systems because battery performance is significantly affected by temperature fluctuations. Extreme temperatures, whether hot or cold, can affect charging performance and the overall health of batteries. The Victron temperature sensor addresses this challenge by providing the charge controller with accurate temperature data, allowing it to optimize the charging process.
During cold weather, the sensor ensures that the charge controller increases the charging voltage to compensate for the battery's reduced performance at lower temperatures. Conversely, in hot conditions, the sensor prompts the controller to reduce the charging voltage, preventing overheating and extending battery life. This intelligent temperature compensation feature is a testament to Victron's commitment to maximizing the reliability and lifetime of solar power systems.
Installation of the Victron temperature sensor is simple and integrates seamlessly into the BlueSolar PWM-Pro charge controller setup. Its rugged design ensures resistance to environmental elements, making it suitable for both off-grid and on-grid solar installations.
In conclusion, the Victron temperature sensor is a valuable addition to the BlueSolar PWM-Pro charge controller, providing accurate temperature data to optimize charging parameters. This integration not only enhances the performance of the solar power system but also contributes to the longevity of the connected batteries. As part of Victron's comprehensive range of energy solutions, the temperature sensor exemplifies the brand's commitment to innovation and performance in the field of renewable energy.
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Price without VAT
| Weight | 1 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
VE.Direct TX digital output cable (PWM light dimming cable)
11.00 €
7.00 € Excluding VAT
8.68 € Includes VAT
7.00 € Excluding VAT
8.68 € Includes VAT
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
SCC VIC BlueSolar PWM-Pro to USB interface cable
13.00 €
9.00 € Excluding VAT
11.16 € Includes VAT
9.00 € Excluding VAT
11.16 € Includes VAT
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
Related products
MC4-Tx3- Female Splitter
15.90 €
11.90 € Excluding VAT
14.76 € Includes VAT
11.90 € Excluding VAT
14.76 € Includes VAT
Type T terminal for connecting (3) three "Female" photovoltaic panel plugs to a "Male"
Solar MC4 branch 3 female to 1 fmale Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.
O rings for secure protection from the elements.
Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Minimum quantity 2 pieces
Price without VAT
In stock
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT
48.00 € Excluding VAT
59.52 € Includes VAT
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Interface device BMV-60XS IVI VIC
122.00 €
94.00 € Excluding VAT
116.56 € Includes VAT
94.00 € Excluding VAT
116.56 € Includes VAT
Interface device with Data logger and Ethernet remote control system.
Price without VAT
Available on backorder
Solar F1x25 cable
9.50 €
6.50 € Excluding VAT
8.06 € Includes VAT
6.50 € Excluding VAT
8.06 € Includes VAT
25mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems & battery connection
Price without VAT
In stock
MC4 female terminal
3.90 €
2.95 € Excluding VAT
3.66 € Includes VAT
2.95 € Excluding VAT
3.66 € Includes VAT
MC4 Female MC4 Solar Connector Female for secure data protection.
Price without VAT
MC4 Connector 2 Female-1 male
9.90 €
8.70 € Excluding VAT
10.79 € Includes VAT
8.70 € Excluding VAT
10.79 € Includes VAT
Terminal for connecting two female photovoltaic panel plugs to one Female
Price without VAT
In stock
MC4 Female Y Cable jumper
17.00 €
9.90 € Excluding VAT
12.28 € Includes VAT
9.90 € Excluding VAT
12.28 € Includes VAT
Female MC4 (Male) with type Y cable branching to 2 MC4 Males.
Price without VAT
Out of stock
VE.Direct M8 Cable BNC male – BNC female
38.44 €
31.66 € Excluding VAT
39.26 € Includes VAT
31.66 € Excluding VAT
39.26 € Includes VAT
VE.Direct M8 Cable BNC male – BNC female
This VE.Direct M8 Cable BNC male – BNC female can be used to extend the cables between a Smart Battery Lithium and the BMS.
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Solar F1x6 cable
2.80 €
1.75 € Excluding VAT
2.17 € Includes VAT
1.75 € Excluding VAT
2.17 € Includes VAT
6mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems.
Price without VAT
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
USB Converter Victron Interface IVI VIC MK2-USB
73.00 €
59.00 € Excluding VAT
73.16 € Includes VAT
59.00 € Excluding VAT
73.16 € Includes VAT
USB Converter Victron Interface IVI VIC MK2-USB
Price without VAT
Out of stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
5kw Mitsubishi Electric
7,280.00 €
5,200.00 € Excluding VAT
6,448.00 € Includes VAT5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Recently viewed products
-
Victron MultiPlus 24/1600/40-16 Photovoltaic Inverter
824.00 €
692.00 € Excluding VAT
858.08 € Includes VATVictron MultiPlus 24 / 1600-40-16
The Victron MultiPlus 24/1600-40-16 new type is intended to replace the previous MultiPlus Compact series. It is a powerful true sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, all in a single compact housing.
Price without VAT
Available on backorder
-
430 Watt Photovoltaic Luxor LX-430M/108 N-Type TopCon MBB (Mono)-Germany
199.00 €
105.00 € Excluding VAT
130.20 € Includes VATPhotovoltaic Luxor LX-430M/108 N-Type TopCon MBB (Mono) - German Certification
Suitable for net billing, net-metering, home PV, parks and PV plants
Minimum quantity 12 pieces
In stock
-
Photovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO / 182-144-European certified
225.00 €
148.00 € Excluding VAT
183.52 € Includes VATPhotovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO / 182-144-European certified
Suitable for photovoltaic roof / net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
Available on backorder
-
6 OPzV 420 2V GEL
317.00 €
189.00 € Excluding VAT
234.36 € Includes VAT453AH - 645AH in C10 hour and C120 hour charge cycle, 2V deep discharge batteries
The OPzV series consists of closed-type lead elements that combine proven gel and tubular plate technologies to offer high levels of reliability and performance.
Price without VAT
Available on backorder
-
Victron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 10A 10A charge regulator
44.00 €
34.50 € Excluding VAT
42.78 € Includes VATVictron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 10A Solar Charge Controller 10A Digital with Liquid Crystal Display for Photovoltaic Panels
Available on backorder
-
7 SOPZV 1190AH / C120 Gel closed battery
406.00 €
321.00 € Excluding VAT
398.04 € Includes VATClosed type photovoltaic batteries GEL 2V RES 7 SOPzV 1190Ah / C120 of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.
Capacity:
1190Ah / C120
Dimensions: 198mm x 155mm x 713mm (Height 740mm with poles). Weight 60Kg
Price without VAT.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
-
CLEAN HALF INVERTER 2000VA WITH BUILT-IN BATTERY CHARGER
598.00 €
407.00 € Excluding VAT
504.68 € Includes VATInverter Charger ECO-PS 2000-24 Multi-Pack- 2000VA / 24V with built-in battery charger
In stock
-
125AH C20 Semi Traction
186.00 €
139.00 € Excluding VAT
172.36 € Includes VAT125AH Semi Traction semi-deep discharge batteries for limited use of small autonomous photovoltaic systems. Lifespan in standby (Floating service) 8-10 years and in discharge up to 35% 4-6 years.
Price without VAT
