Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron Temperature sensor for BlueSolar PWM-Pro
8.00 € Excluding VAT
9.92 € Includes VAT
Heat sensor for the BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Price without VAT
Available on backorder
... people are viewing this right now
Victron Temperature sensor for BlueSolar PWM-Pro
Victron Energy is a renowned name in the field of renewable energy solutions and BlueSolar PWM-Pro charge controllers stand out as reliable and efficient components for solar power systems. To enhance the functionality of these controllers, Victron offers a specialized accessory – the temperature sensor Victron.
The Victron temperature sensor is a critical addition to the BlueSolar PWM-Pro charge controller, designed to optimize charging parameters based on real-time temperature conditions. This sensor plays a vital role in ensuring the longevity and performance of your battery by allowing the charge controller to make temperature compensated charging decisions.
One of the key features of the temperature sensor Victron is its compatibility with BlueSolar PWM-Pro charge controllers. This integration enables seamless communication between the sensor and the controller, creating a dynamic system that adapts to environmental changes. The sensor measures the ambient temperature and transmits this information to the charge controller, which then adjusts the charge voltage accordingly.
Temperature compensation is essential in solar power systems because battery performance is significantly affected by temperature fluctuations. Extreme temperatures, whether hot or cold, can affect charging performance and the overall health of batteries. The Victron temperature sensor addresses this challenge by providing the charge controller with accurate temperature data, allowing it to optimize the charging process.
During cold weather, the sensor ensures that the charge controller increases the charging voltage to compensate for the battery's reduced performance at lower temperatures. Conversely, in hot conditions, the sensor prompts the controller to reduce the charging voltage, preventing overheating and extending battery life. This intelligent temperature compensation feature is a testament to Victron's commitment to maximizing the reliability and lifetime of solar power systems.
Installation of the Victron temperature sensor is simple and integrates seamlessly into the BlueSolar PWM-Pro charge controller setup. Its rugged design ensures resistance to environmental elements, making it suitable for both off-grid and on-grid solar installations.
In conclusion, the Victron temperature sensor is a valuable addition to the BlueSolar PWM-Pro charge controller, providing accurate temperature data to optimize charging parameters. This integration not only enhances the performance of the solar power system but also contributes to the longevity of the connected batteries. As part of Victron's comprehensive range of energy solutions, the temperature sensor exemplifies the brand's commitment to innovation and performance in the field of renewable energy.
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Price without VAT
| Weight | 1 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
VE.Direct TX digital output cable (PWM light dimming cable)
11.00 €
7.00 € Excluding VAT
8.68 € Includes VAT
7.00 € Excluding VAT
8.68 € Includes VAT
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
SCC VIC BlueSolar PWM-Pro to USB interface cable
13.00 €
9.00 € Excluding VAT
11.16 € Includes VAT
9.00 € Excluding VAT
11.16 € Includes VAT
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
Related products
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT
49.00 € Excluding VAT
60.76 € Includes VAT
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Skylla-i remote on-off cable
35.00 €
29.50 € Excluding VAT
36.58 € Includes VAT
29.50 € Excluding VAT
36.58 € Includes VAT
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on / off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switching on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
In stock
Solar F1x4 cable
1.95 €
1.45 € Excluding VAT
1.80 € Includes VAT
1.45 € Excluding VAT
1.80 € Includes VAT
4mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems
Price without VAT
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT
22.00 € Excluding VAT
27.28 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
VE.Bus BMS to BMS 12-200 alternator control cable
36.00 €
35.00 € Excluding VAT
43.40 € Includes VAT
35.00 € Excluding VAT
43.40 € Includes VAT
Victron VE.Bus BMS to BMS 12-200 alternator control cable
With this cable, the charge control function of the BMS 12/200 can be used together with the VE.Bus BMS.
Available on backorder
Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VAT
8.00 € Excluding VAT
9.92 € Includes VAT
Heat sensor for BlueSolar PWM-Pro charge regulators.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Available on backorder
BMV RS232 interface device with IVI VIC software
592.00 € Excluding VAT
734.08 € Includes VAT
734.08 € Includes VAT
BMV-PC interface for exporting battery charge / discharge data to Excel
Price without VAT
Available on backorder
MC4 Female Y Cable jumper
17.00 €
9.90 € Excluding VAT
12.28 € Includes VAT
9.90 € Excluding VAT
12.28 € Includes VAT
Female MC4 (Male) with type Y cable branching to 2 MC4 Males.
Price without VAT
Out of stock
Non-inverting remote on-off cable
22.00 €
16.00 € Excluding VAT
19.84 € Includes VAT
16.00 € Excluding VAT
19.84 € Includes VAT
Victron Non Inverting remote on-off cable
Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VAT565 watts now available
LUXOR 565W N-Type TopCon LX-565TC M/144/N-TYPE/FS35/SW/16B/1500V Dimensions 2279x1134x35. Information here
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
Recently viewed products
-
Xantrex SW 4548 E
5,096.00 €
3,545.00 € Excluding VAT
4,395.80 € Includes VATConverter 4500 VA 48V with integrated charger and metal relay.
Price without VAT
-
Pure Sine Inverter Premium SK - 1000-S-TY-24V
329.00 €
279.00 € Excluding VAT
345.96 € Includes VATProduct Name: Premium SK - 1000-S-TY-24V
Voltage: 24V
Series: Premium S with built-in digital display
Powerful and reliable Inverter pure sine Premium SK - 1000-S-TY-24V from high-efficiency Solar Energy with energy savings in relation to the self-consumption of powered appliances up to 25%. The pure sine wave converter provides an output voltage waveform that has very low harmonic distortion. Suitable for all devices with this voltage and operating frequency. It also supports devices that have a high current requirement when starting. The product complies with the standards of quality, safety and good operation of European markets - German technology.
Use: caravans, yachts, boats, photovoltaic systems, hybrid systems, caravans, compressors, air conditioners, engines, pumps, remote storage, household electrical appliances, office electrical appliances, computers, laptops, mobile phone chargers, etc. Inverters of this type can also prevent computer errors, noise and malfunctions on screens, TVs, game consoles, etc. At the same time they are a reliable source of power for all your electronic devices.
Product Warranty: 30 Months
In stock
-
Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter with Power 1200 VA for Photovoltaics
425.00 €
300.00 € Excluding VAT
372.00 € Includes VATVictron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter 12V / 1200VA / 230V for Photovoltaics
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.
Technical Characteristics
Power : 1200 VA
Input voltage: 12 V DC
Output voltage: 230 V AC
Έξοδος: SHUKO
Peak power: 2400 W
Performance level : 94%
Available on backorder
-
Blue Power IP67 Charger 24/8 Battery Charger (1 'Output + Si)
174.00 €
147.00 € Excluding VAT
182.28 € Includes VATCharger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.Price without VAT -
Fronius PRIMO GEN24 5.0 PLUS mains inverter for photovoltaics
2,421.00 €
1,890.00 € Excluding VAT
2,343.60 € Includes VATFronius PRIMO GEN24 5.0 PLUS mains inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
-
Network Inverter SUNG SG5.0RT
1,504.00 €
1,211.00 € Excluding VAT
1,501.64 € Includes VATNetwork Inverter SUNG SG5.0RT Three-phase converter
Available on backorder
-
Rolls 12 EHG 210p
1,032.00 €
789.00 € Excluding VAT
978.36 € Includes VAT210AH 12V 7 year warranty
Series 4000 - 12Volt (6 Components) double container
SERIES 4000 MARINE / 7 YEARS WARRANTY Price without VAT
Out of stock
-
Economical autonomous Photovoltaic 3.5kwh-4.5kwh
1,695.00 €
1,299.00 € Excluding VAT
1,610.76 € Includes VATEconomical autonomous photovoltaic 3.5kwh-4.5kw
Available on backorder
-
6 PzS 930PB 2V Deep discharge SUNLIGHT battery
184.00 €
178.50 € Excluding VAT
221.34 € Includes VAT6 PzS 930PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 930Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage 2 Capacity (C5) 775 [AH] Length 198 [mm] Width 119 [mm] Height 713 [mm] Height with poles 740 [mm] Weight 50.500 [kg] Ind NO Applications
In stock
-
3 PzS 345PB 2V Deep discharge SUNLIGHT battery
85.00 €
79.40 € Excluding VAT
98.46 € Includes VAT3 PzS 345PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 345Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage 2 Capacity (C5) 345 [AH] Length 198 [mm] Width 65 [mm] Height 548 [mm] Height with poles 575 [mm] Weight 20.000 [kg] Ind NO In stock
