Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
Single phase reverse 250W of Victron Energy company with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
The reliability of VICTRON products has been successfully tested for decades in ambulance, fire, police, marine, motorhome and trailer applications and elsewhere. As a specialized company in autonomous energy systems, VICTRON ENERGY has designed products that are characterized by experts in the field as leading in all areas. The variety of specialized products for autonomous systems it is very large, with a special feature being the possibility of networking between them for better programming and control, even from a distance.
The full bridge and toroidal transformer topology has proven its reliability for many years.
The inverters are short-circuit proof and protected against overheating, either due to overload or due to high ambient temperature.
Required to start loads such as power inverters for LED lamps, halogen lamps or power tools.
When in ECO mode, the inverter will go into standby mode when the load drops below a preset value (minimum load: 15W). Once in standby mode, the inverter will turn on for a short time (adjustable, default: every 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain on.
The solar charger ensures that the batteries are charged with energy collected from your solar panels. The charging algorithm is programmable.
The Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to remotely turn the inverter on or off. Alternatively, a remote on/off switch can be connected to a bipolar connector or between the battery plus and the left contact of the bipolar plug.
Refer to the manual for description.
Inverter and solar charger parameters can be read, monitored and configured via Bluetooth using the VictronConnect app.
The VE.Direct port can be used to connect to a GX device, the GlobalLink 520 for monitoring via the VRM gateway, or to connect to a PC for monitoring or configuration using the VictronConnect app.
• Inverter input and output voltage and % load
• Solar energy, voltage and current
• Operational status and alarms
• Low battery alarm stop and reset levels
• Low battery voltage cut and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 – 245 V and Frequency 50 Hz or 60 Hz
• Enable/disable ECO mode and ECO mode feeling level
• Battery charging current, algorithm and voltages
• Battery charging temperature compensation or low temperature level reduction
For low power inverters, we recommend the Filax automatic transfer switch. Filax has a very short transition time (less than 20 milliseconds), so computers and other electronic equipment can continue to operate without interruption.
No special cable lugs or tools are needed for installation.
Comes with IEC-320 plug IEC-320 male plug included.
SUN INVERTER | 12/250 | 24/250 | |
Cont. power at 25 °C (1) | 250 VA | ||
Cont. power at 25 °C / 40 °C | 200 W / 175 W | ||
peak power | 400 W | ||
AC output voltage / frequency (adjustable) | 230 Vac +/- 3 % | 50Hz or 60Hz +/- 0.1 % | |
DC input voltage range | 9.2 - 17 V | 18.4 - 34.0 V | |
DC low shut down (adjustable) | 9.3 V | 18.6 V | |
Dynamic (load dependent) DC low shut down | Configurable via the “dynamic cut-off” setting | ||
DC low restart and alarm (adjustable) | 10.9 V | 21.8 V | |
Battery charged detect (adjustable) | 14.0 V | 28.0 V | |
Max. efficiency | 87% | 88% | |
Zero-load power | 4.2 W | 5.2 W | |
Default zero-load power in ECO mode (2) | 0.8 W | 1.3 W | |
Solar charger technology | Pulse Width Modulation (PWM) | ||
Maximum PV voltage current and power | 25V / 15A / 375W | 50V / 10A / 500W | |
Solar panel type | 36 cell solar panels | 72 cell solar panel or two 36 cell solar panels in series | |
Charge voltages | Adjustable and able to be temperature compensated (3) | ||
Protections (4) | a – f | ||
Operating temperature range | -40 to +60 °C (fan assisted cooling) / Output power deration: 1.25 % per °C above 40 °C | ||
Humidity (non-condensing) | max 95% | ||
Bluetooth wireless communication | For remote monitoring and configuration | ||
VE.Direct communication port | For remote monitoring and system integration | ||
ENCLOSURE | |||
Material & Colour | Steel chassis and plastic cover (blue RAL 5012) | ||
Battery connection | Screw terminals, maximum cable cross-section 10 mm² / AWG 8 | ||
PV-connection | Screw terminals, maximum cable cross-section 4 mm² / AWG 12 | ||
Standard AC outlet | IEC-320 (male plug included) | ||
Protection Category | IP 21 | ||
Weight | 2.4 kg / 5.3 lbs | ||
Dimensions (hxwxd) | 86 x 165 x 260 mm / 3.4 x 6.5 x 10.2 inch | ||
ACCESSORIES | |||
Remote on-off | Yes | ||
Automatic transfer switch | Filax | ||
STANDARD | |||
Safety | EN-IEC 60335-1 / EN-IEC 62109-1 | ||
EMC | EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-3 | ||
Automotive Directive | ECE R10-4 EN 50498 | ||
(1) Nonlinear load, crest factor 3:1
(2) The default ECO mode retry interval is 2.5 s. The retry interval, stop power level, and start power level are adjustable. (3) Temperature compensation via an optional "Temperature sensor Quattro, MultiPlus and GX Device" or the "Smart Battery Sense". |
(4) Protection key:
a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high |
Weight | 8.2 kg |
---|
All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
Price without VAT
In stock
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Electronic protections:
Price without VAT
Available on backorder
The Multi is a powerful sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single compact box. Multi prevents overloading of a source with limited AC voltage. In the event of a fault in the network or if the power is disconnected from the ground source or the generator, the inverter inside the Multi is automatically activated and takes over the power supply of the connected loads.
Price without VAT
Available on backorder
Victron Easy Solar 24/1600 / 40-16 MPPT 100/50-Inverter Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.
Available on backorder
Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Price without VAT
Available on backorder
Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Price without VAT
Available on backorder
Victron EasySolar 48/5000/70 MPPT 150/100 Color Control-Inverter Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.
Available on backorder
New inverter / charger 500VA
The Multi 500VA is a powerful true sine wave inverter, but also an advanced battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single, compact housing.
Proven reliability
The complete bridge topology and the toroidal transformer have proven their reliability for many years.
Ο inverter has short circuit protection and is protected from overheating, whether due to overload or high ambient temperature.
Price without VAT
Available on backorder
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
VDE-AR-N 4105 and AS / NZS 4777.2 approval (other country specific approvals will follow soon) Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power , and to recharge batteries, either with shore power or an onboard AC generator. The MultiPlus is also the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83 / 2 and G59-3-1 standards).
Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and several other country specific energy storage related standards. The resulting product is the MultiGrid. The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations. The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies, shown in the pictures below. More detail can be found in our Energy Storage brochure.
Price without VAT
Available on backorder
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or the secondary supply from a ground source with power coming from the battery. Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC power supplies, for example to one ground power source and one generator, or to two generators. The Quattro automatically connects to the active power source.
Price without VAT
In stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
In stock
Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1). Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
Available on backorder
300WATT (420VA) / 12V or 24V pure sine wave
PURE sinewave EXIT 220V / 50Hz 300W / PEAK 400W INPUT 12V DC
Net sine wave output. (<3% THD)
"Low power energy saving function" for energy conservation.
Price without VAT
Available on backorder
Closed calcium batteries 60AH European type 60Ah 12V, 550A intended for limited use in autonomous photovoltaic systems while containing Calcium plates. They have two reinforced Calcium plates, very good quality at an extremely affordable price, and a satisfactory lifespan which varies depending on the use from 4-6 years. One year warranty is provided and the discharge rate should not exceed 35%.
The batteries are closed and do not require maintenance during installation and use. They have increased starting current ensuring operation under the most demanding conditions.
• The closed type battery 60AH has a construction 100% waterproof and is not required
maintenance.
• Plates are Calcium / Calcium.
• A guarantee of up to 1 year is provided.
• It has reinforced lead plates
• Provides large starting currents and their main use is for starter use in motors and limited for photovoltaic use.
• The closed type battery has an average life of 4-6 years.
In stock
Kaco KA BLUEPLANET 105 mains inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and high peak power. Suitable for a wide range of applications, capable of providing power, without problems, to any load.
Excellent professional quality compact and lightweight.
The line Phoenix of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
Specifications
Inverter off | |
---|---|
Power (W) | 300 |
Manufacturer | VictronEnergy |
Input Voltage (V) | 12V DC |
Output Voltage (V) | 230V AC +/- 3% |
Performance level (%) | 89 |
IP protection | IP21 |
Weight (kg) | 3.0 |
Warranty (years) | 5 |
Other Information | ECO mode, Remote on / off, LED diagnosis, Dynamic cut off |
Available on backorder
High efficiency photovoltaic EUROPEAN 150 watt -155 watt 12v polycrystalline silicon with 12 years factory hardware warranty & 25 years power efficiency guarantee at 80%.
High efficiency
12V DC standard output
CE, TUV junction box
Lifetime: 35 years
Warranty 12 years
90% power 12 years
80% power 25 years
Price without VAT
In stock
SMA IV SB 6.0-1AV-41 6000W Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
BATTERY OBM ECOAGM A-125-12 125Ah 12V C100
The 12V deep discharge batteries OBM ECOAGM 125AH are designed with AGM technology for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electric elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
accumulator.
Dimensions:406 * 173 * 209mm
Weight: 31.4kg
A 2-year warranty is provided
Price without VAT
Out of stock
Not a member? Create an account
Already got an account? sign in here