Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
- You cannot add that amount of "Battery Charger Cotek CX1280 - 12V - 80A - 230VAC" to the cart because there is not enough stock (0 remaining).
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
56.00 € Excluding VAT
69.44 € Includes VAT
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 220 (12V) / 440 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 100 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
... people are viewing this right now
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron BlueSolar MPPT 100/15 Victron's battery charge controllers, thanks to the technology of quickly finding the maximum power output point (MPPT) from photovoltaic panels, even in shaded conditions, promise the fastest possible charging of the batteries of the stand-alone photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term smooth operation.
They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Top Features:
- Extremely fast maximum power efficiency (MPPT) detection
- Advanced finding of optimal power efficiency in case of partial shading
- Load output for small models
- Battery life: intelligent battery management with load cut-off
- Automatic battery voltage detection
- Flexible charging algorithm
- Overheating protection and automatic reduction of output power to protect the device when the temperature is high
Load output
• Limit battery discharge can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery is discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected.
• Load output includes short circuit protection.
Some loads (especially inverters) are best connected directly to the battery, while the remote control of the inverter can be connected to the output of the load.
Battery life: smart battery management
When a solar charge controller is unable to recharge the battery to its full capacity within a day, the result is often that the battery switches between a partially charged and a fully discharged state. This mode (without regular full charge) will damage a lead-acid battery in a matter of weeks or months.
The algorithm that monitors battery life monitors the charge status of the battery and if necessary, day by day may slightly increase the level of charge disconnection (ie charge disconnection may occur earlier) until the solar energy harvest is sufficient for recharging the battery to almost full charge. From that point on, the level of cargo disconnection should be adjusted so that an almost 100% recharge is achieved approximately once each week.
Waterproof, compact housing, low cost
The recognizable blue case of Victron Energy is light (500 g), waterproof and does not raise the temperature. The electronic components of the charger are enclosed in resin, so that they have the best possible protection from harmful external influences. The charge regulator automatically adjusts to 12V or 24V systems.
Color Control Code GX
All battery charge controller VictronEnergy MPPT Charge are compatible with the GX control color code which offers an intuitive control and easy tracking for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and many more products of the company.
VRM Online Portal
In addition to tracking and checking products with the GX control color code, the information can be sent to the tracking website of VICTRON at no extra charge.
In addition to tracking and checking products with the GX control color code, the information can be sent to the tracking website of VICTRON at no extra charge.
Specifications
| Type | MPPT |
| Power (W) | 220 (12V) / 440 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 100 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
| Weight | 0.6 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
340.00 €
286.00 € Excluding VAT
354.64 € Includes VAT
286.00 € Excluding VAT
354.64 € Includes VAT
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| Blue Solar MPPT 150/60 Tr |
|
| Battery Voltage | 12/24/48 V Auto Select (software tool needed to select 36V) |
| Rated charging current | A 60 |
| Maximum PV power 12V 1a, b) | 860w |
| Maximum PV power 24V 1a, b) |
1720w |
| Maximum PV power 48V 1a, b) | 3440w |
Available on backorder
Victron BlueSolar MPPT 100/50 - Charge Regulator 50A-MPPT for Photovoltaic-Wind Turbines
179.00 €
150.00 € Excluding VAT
186.00 € Includes VAT
150.00 € Excluding VAT
186.00 € Includes VAT
Victron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| BlueSolar Charge controller | MPPT 100/50 |
| Battery Voltage | 12 / 24V auto select |
| Rated charging current | A 50 |
| Nominal PV Power, 12 V 1a), 1b) | 700 W (MPPT range 15 V to 70 V resp. 95 V) |
| Nominal PV Power, 24 V 1a), 1b) | 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V) |
| Maximum PV open circuit voltage | 100 V |
| Peak efficiency | 98% |
| Self-consumption | 10 mA |
| Charge voltage 'absorption' | 14,4 V / 28,8 V (adjustable) |
| Charge voltage 'float' | 13,8 V / 27,6 V (adjustable) |
| Charge algorithm | multi-stage adaptive |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C |
| Protection | Battery reverse polarity (fuse) / Output short circuit / Over temperature |
| Operating temperature | -30 ° C to +60 ° C (full rated output up to 40 ° C) |
| Humidity | 95% non-condensing |
| Data Communication Port | VE.Direct |
Available on backorder
Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
215.00 €
181.00 € Excluding VAT
224.44 € Includes VAT
181.00 € Excluding VAT
224.44 € Includes VAT
Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| Model | Victron BlueSolar MPPT 150/45-Tr |
| Part# | SCC010045200 |
| battery voltage | 12/24/48 volt auto select, 36 volt software select |
| Rated charging current | 45A |
| Maximum PV power, 12/24/48 volts | 650/1300/2600 Watts |
| Maximum PV open circuit voltage | 150V absolute maximum coldest conditions 145V Start-up and Operating Maximum |
| Peak efficiency | 98% |
| Self consumption | 10 mA |
| Charge algorithm | Multi-stage adaptive |
| Temperature compensation | -16 mV / -32 mV / -68 mV / ° C |
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) |
| Humidity | 95%, Non-condensing |
| Data Communication Port | VE.Direct |
Available on backorder
Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines
119.00 €
100.00 € Excluding VAT
124.00 € Includes VAT
100.00 € Excluding VAT
124.00 € Includes VAT
Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| Model | Victron BlueSolar MPPT 100/30 |
| battery voltage | 12/24 volt auto select |
| Rated charging current | 30A |
| Maximum PV power, 12V (a, b) | 440 W |
| Maximum PV power, 24V (a, b) | 880 W |
| Max. PV Short Circuit Current | 30A |
| Maximum PV open circuit voltage | 100V |
| Peak efficiency | 98% |
| Self consumption | 10mA |
| Charge voltage 'absorption' | Adjustable, default = 14.4V / 28.8V |
| Charge voltage 'float' | Adjustable, default = 13.8V / 27.6V |
| Charge algorithm | Multi-stage adaptive |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C |
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) |
| Humidity | 95%, Non-condensing |
Available on backorder
Related products
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
10A Economy Charger regulator for photovoltaic systems
19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
- 10A battery charger for photovoltaic frame 12v 160 watt
- With program number display and load connection output with night mode scheduling.
- Suitable for 12V or 24V batteries (automatic selection).
- Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
- Maximum input voltage 41V.
- Maximum voltage drop during charging 0,2V.
- Maximum operating current 10A.
- Warranty: 14 months.
Price without VAT
Out of stock
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Charging regulator VS6024BN 60A PWM-USB
129.00 €
119.00 € Excluding VAT
147.56 € Includes VAT
119.00 € Excluding VAT
147.56 € Includes VAT
Charging regulator VS6024BN 60A PWM with programmable screen
Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.
It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.
Price without VAT
Out of stock
LS2024EPD 20A PWM Charging regulator waterproof
42.00 €
29.90 € Excluding VAT
37.08 € Includes VAT
29.90 € Excluding VAT
37.08 € Includes VAT
Waterproof / watertight charge regulator IP 67 LS2024EPD 20A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
In stock
Charging Regulator LS3024 30A PWM
34.10 €
27.00 € Excluding VAT
33.48 € Includes VAT
27.00 € Excluding VAT
33.48 € Includes VAT
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT
49.00 € Excluding VAT
60.76 € Includes VAT
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
WATERPROOF CHARGING REGULATOR LS1024BP
57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT
32.00 € Excluding VAT
39.68 € Includes VAT
Charging regulator waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans
Price without VAT
In stock
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT
22.00 € Excluding VAT
27.28 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
679.00 €
499.00 € Excluding VAT
618.76 € Includes VAT
499.00 € Excluding VAT
618.76 € Includes VAT
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
Price without VAT
In stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
229.00 €
119.00 € Excluding VAT
147.56 € Includes VAT565 watts now available
LUXOR 565W N-Type TopCon LX-565TC M/144/N-TYPE/FS35/SW/16B/1500V Dimensions 2279x1134x35. Information here
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Recently viewed products
-
4 SOPZV 565AH / C120 GEL closed battery
255.00 €
177.00 € Excluding VAT
219.48 € Includes VATClosed type photovoltaic batteries GEL 2V RES 4 SOPzV 565Ah / C120 of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.
Capacity:
568Ah / C120
Dimensions: 198mm x 83mm x 568mm (Height 595 mm with poles). Weight 28.7 Kg
Price without VAT.
Available on backorder
-
Victron Energy MultiPlus 12/2000/80-32 Photovoltaic inverter
1,092.00 €
918.00 € Excluding VAT
1,138.32 € Includes VATWhat is a Victron MultiPlus inverter?
The new type MultiPlus is intended to replace the previous MultiPlus Compact series. It is a powerful pure sine wave inverter and a sophisticated battery charger with adaptive charging technology as well as a high-speed AC transfer switch, all in a compact metal frame.
Available on backorder
-
50A digital charging regulator with LCD & usb screen
89.00 €
79.00 € Excluding VAT
97.96 € Includes VAT50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline
In stock
-
Delphi Freedom 2000
293.00 €
249.00 € Excluding VAT
308.76 € Includes VAT105AH / 12V 5-7 years lifespan.
The price does not include VAT + shipping
Out of stock
-
Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase
754.00 €
453.00 € Excluding VAT
561.72 € Includes VATHuawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics
2,299.00 €
1,932.00 € Excluding VAT
2,395.68 € Includes VATVictron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics
Victron Energy charging regulator suitable for installations up to 200A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter with Power 1200 VA for Photovoltaics
425.00 €
300.00 € Excluding VAT
372.00 € Includes VATVictron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter 12V / 1200VA / 230V for Photovoltaics
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.
Technical Characteristics
Power : 1200 VA
Input voltage: 12 V DC
Output voltage: 230 V AC
Έξοδος: SHUKO
Peak power: 2400 W
Performance level : 94%
Available on backorder
-
Studer C 4000-48
3,147.00 €
2,249.00 € Excluding VAT
2,788.76 € Includes VAT4000VA 48V with charger and switch relay, pure sine / 30 min
Studer converters with integrated Compact series battery-charger
Compact series inverters come with 3 devices - a sinusoidal inverter, a battery charger and a transfer system.Price without VAT
Available on backorder
-
Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V
864.00 €
640.00 € Excluding VAT
793.60 € Includes VATPure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V
Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V
with WiFi
Available on backorder
-
Windy Boy 1100
1,090.00 €
940.00 € Excluding VAT
1,165.60 € Includes VAT1100W mains converter
Special prices for the purchase of more than 3 piecesWindy Boy 1100s are inverters for supplying the grid with small and very small wind power systems and for use in remote networks. Windy Boy Inverters are compatible, like all SMA Inverters, with all communication products and are distinguished by the high protection class IP65 and the high level of SMA grid guard® network surveillance regardless of their location.
Price without VAT
In stock
