Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-33%Limited
temperatur – sensor-for-blue-solar-pwm-pro.gif
Add to Compare Added to Compare

Temperature sensor for BlueSolar PWM-Pro

BlueSolar PWM-Pro to USB interface cable

8.00 € + VAT

Skylla-i remote on-off cable

29.50 € + VAT
12.00 €
8.00 € Excluding VAT
9.92 € Includes VAT

Heat sensor for BlueSolar PWM-Pro charge regulators.

Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.

The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445

Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro

Available on backorder

  ... people are viewing this right now
  Share

Heat sensor for BlueSolar PWM-Pro charge regulators.

Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.

Brand

SKU: Temperature sensor for BlueSolar PWM-Pro Categories: ,

you may also like...

-36%Limited
Add to cart
VE.Direct TX digital output cable (PWM light dimming cable) 11.00 €
7.00 € Excluding VAT
8.68 € Includes VAT

This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older   version can be updated for this

 

Price without VAT

In stock

Related products

-18%Limited
Add to cart
VE.Direct M8 Cable-BNC male-BNC female, victron
VE.Direct M8 Cable BNC male – BNC female 38.44 €
31.66 € Excluding VAT
39.26 € Includes VAT

VE.Direct M8 Cable BNC male – BNC female

This VE.Direct M8 Cable BNC male – BNC female can be used to extend the cables between a Smart Battery Lithium and the BMS.

Available on backorder

-5%Limited
Add to cart
Cable for Smart BMS CL 12/100, victron, photovoltaics
Cable for Smart BMS CL 12/100 18.43 €
17.43 € Excluding VAT
21.61 € Includes VAT

Cable for Smart BMS CL 12/100

This cable for Smart BMS CL 12/100 connects between a non-VE.Bus BMS) and a MultiPlus ( MultiPlus, MultiPlus Compact or MultiPlus-II).

Available on backorder

-21%Limited
Add to cart
MC4-Tx3- Male Splitter 15.00 €
11.90 € Excluding VAT
14.76 € Includes VAT

Type T terminal for connecting (3) three "male" photovoltaic panel plugs to a "Female"

Solar MC4 branch 3 male to 1 female Y piece splitter

Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.

O rings for secure protection from the elements.

Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.

Specification

Rated current 30A

Max voltage 1000v

Mated protection IP67

Safety class 2

-40 to 90 degrees C

Minimum quantity 2 pieces

Price without VAT

In stock

-25%Limited
Add to cart
MC4-Tx3- Female Splitter 15.90 €
11.90 € Excluding VAT
14.76 € Includes VAT

Type T terminal for connecting (3) three "Female" photovoltaic panel plugs to a "Male"

Solar MC4 branch 3 female to 1 fmale Y piece splitter

Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v / 24v panels in parallel to keep a 12v / 24v output.

O rings for secure protection from the elements.

Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.

Specification

Rated current 30A

Max voltage 1000v

Mated protection IP67

Safety class 2

-40 to 90 degrees C

Minimum quantity 2 pieces

Price without VAT

In stock

Add to cart
BMV RS232 interface device with IVI VIC software 592.00 € Excluding VAT
734.08 € Includes VAT

BMV-PC interface for exporting battery charge / discharge data to Excel

Price without VAT

Available on backorder

-23%Limited
Add to cart
Interface device BMV-60XS IVI VIC 122.00 €
94.00 € Excluding VAT
116.56 € Includes VAT

Interface device with Data logger and Ethernet remote control system.

Price without VAT

Available on backorder

-34%Limited
Add to cart
Solar F1x10 cable 3.80 €
2.50 € Excluding VAT
3.10 € Includes VAT

10mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.

Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems

 Price without VAT

-16%Limited
Add to cart
Victron BlueSolar
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics 51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics

The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.

Programmable with night mode

  1. The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  3. Battery status check function (Remote Panel required)
  4. Night mode (Remote Panel required)
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
  7. Optional external temperature sensor.

 Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

-27%Limited
Add to cart
non inverting remote on-off cable, victron, photovoltaic
Non-inverting remote on-off cable 22.00 €
16.00 € Excluding VAT
19.84 € Includes VAT

Victron Non Inverting remote on-off cable

Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.

Available on backorder

-27%Limited
Add to cart
Inverting remote on-off cable 22.00 €
16.00 € Excluding VAT
19.84 € Includes VAT

Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:

In stock

-32%Limited
Add to cart
Solar F1x25 cable 9.50 €
6.50 € Excluding VAT
8.06 € Includes VAT

25mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.

Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems & battery connection

 Price without VAT

In stock

-24%Limited
Add to cart
Terminal MC4 Male 2.90 €
2.20 € Excluding VAT
2.73 € Includes VAT

MC4 terminal Male MC4 Solar Connector male for secure data protection.

Price without VAT

In stock

Most viewed products

Recently viewed products

  • -30%Limited
    Add to cart
    Communication charge regulator cable CC-RS485B-RS485-150U 11.00 €
    7.70 € Excluding VAT
    9.55 € Includes VAT

    Charging regulator cable Communication cable CC-RS485B-RS485-150U for charging regulators of Epsolar for Tracer Viewstar, VS Landstar, LS series Solar Charge Controller

    Price without VAT

    In stock

  • -29%LimitedSOLD OUT
    read more
    5kw Mitsubishi Electric
    5kw Mitsubishi Electric 7,280.00 €
    5,200.00 € Excluding VAT
    6,448.00 € Includes VAT

    5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon

    It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of ​​35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.

    Price without VAT

    Out of stock

  • -3%Limited
    Add to cart
    6 PzS 930PB 2V Deep discharge SUNLIGHT battery 184.00 €
    178.50 € Excluding VAT
    221.34 € Includes VAT

    6 PzS 930PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 930Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 775 [AH]
    Length 198 [mm]
    Width 119 [mm]
    Height 713 [mm]
    Height with poles 740 [mm]
    Weight 50.500 [kg]
    Ind NO

    Applications

    In stock

  • -34%Limited
    Add to cart
    Solar Energy Offer Net metering 5kW photovoltaic package for energy offset and savings in PPC bills up to 1250 euros per year.
    Net-metering-Solar-Energy-5kw-PPC 4,860.00 €
    3,190.00 € Excluding VAT
    3,955.60 € Includes VAT

    5kw with photovoltaic net metering with PV PANEL Solar Energy Plus
    440-445 watt silicon with positive watt tolerance !!!

    Price without VAT

    Available on backorder

  • -24%LimitedSOLD OUT
    read more
    Xantrex DR 1524 E 1,139.00 €
    869.00 € Excluding VAT
    1,077.56 € Includes VAT

    1500 VA 24V converter with integrated charger and metal relay

    Price without VAT

    Out of stock

  • -36%LimitedSOLD OUT
    read more
    Effect-BTG-12-120D 336.00 €
    215.00 € Excluding VAT
    266.60 € Includes VAT

    120AH / 12V 10-12 years Gel life

    Out of stock

  • -19%Limited
    Add to cart
    Goodwe GW10KT-DT 620V-inverter-diktyou-net-metering, prices, offers, purchase, net metering PPC, HEDNO
    Goodwe GW10KT-DT 620V mains inverter 1,690.00 €
    1,361.00 € Excluding VAT
    1,687.64 € Includes VAT

    Goodwe GW10KT-DT 620V network inverter for interconnected net metering system

    Available on backorder

  • -6%LimitedSOLD OUT
    read more
    3 PzB 315 2V Deep discharge SUNLIGHT battery 82.00 €
    77.33 € Excluding VAT
    95.89 € Includes VAT

    3 PzB 315 2V SUNLIGHT deep discharge battery. Traction battery - open type with liquids, with 2500 cycles at 50% COMING and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily power to your industrial or commercial vehicles.

    Out of stock

  • -16%Limited
    Add to cart
    Victron SmartSolar MPPT 250/85-Tr
    Victron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator 586.00 €
    493.00 € Excluding VAT
    611.32 € Includes VAT

    Victron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Specifications

    Model No.
    MPPT 250/60 MPPT 250/70 MPPT 250/85 MPPT 250/100
    Electrical data
    Max. Solar Input Power
    860/1720/3440 W 1000/2000/4000 W 1200/2400/4900 W 1450/2900/5800 W
    Max. Solar Panel Open Circuit Voltage
    250 V 250 V 250 V 250 V
    Max. Solar Panel Short Circuit Current
    A 35 A 35 A 70 A 70
    Nominal System (Battery) Voltage
    12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V
    Self-Consumption
    35 mA 35 mA 35 mA 35 mA
    Peak Conversion Efficiency
    99.00% 99.00% 99.00% 99.00%
    General Data

     

    Available on backorder

  • -27%Limited
    Add to cart
    PZSX 210 AH 116.00 €
    85.00 € Excluding VAT
    105.40 € Includes VAT

    210 Ah 2V with a lifespan of 12 years

     

      CLUB   TYPE   COUNTRY R.EKF R. FORT. A BAR.      DIMENSIONS (THOUSAND) EACH VALUE
       KIDDING        ELEMENT   AH @ 5H A @ 5H Arch. End M.Y. Χ Ψ Υ S.Y €
    105 2 EPzS 210 210 42 34 8 13,4 47 198 510 540 58,31

     

    price without VAT

    In stock

Temperature sensor for BlueSolar PWM-Pro,

Temperature sensor for BlueSolar PWM-Pro,

Get the PWM-Pro heat sensor at the cheapest price on the market. Temperature sensor for BlueSolar PWM-Pro for autonomous systems, photovoltaic, wind, hybrid, with high efficiency at the lowest price.

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category