Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Sunny Island SMA MPPT 50MPT 40A 12/24 / 48V Charging Regulator
Price without VAT
Available on backorder
Voltage 12/24 / 48V
Ampere: 40Ah
Dimensions: 421 * 310 * 143 mm
Weight: 10kg
Possibility of parallel connection of up to four devices and possibility of expansion in smaller repetitive structures.
Suitable for outdoor areas. (IP65)
Reverse polarity protection
Short circuit resistance
Overload protection
Protection against hypertension and hypotension
Protection against overheating and low temperatures
12V | 24V | 48V | |
ENTRANCE | |||
MAXIMUM DC INPUT POWER | 630w | 1250w | 2400w |
MAXIMUM DC INPUT VOLTAGE | 140V DC | 140V DC | 140V DC |
OPTIMAL MPPT VOLTAGE | 25V-60V | 40V-80V | 70V-100V |
NUMBER OF MPP DETECTORS | 1 | 1 | 1 |
MAXIMUM DC INPUT CURRENT | 40Ah | 40Ah | 40Ah |
EXIT | |||
NOMINAL POWER DC UP TO 40oC | 600w | 1200w | 2400w |
NOMINAL VOLTAGE DC | 12V | 24V | 48V |
MAXIMUM CHARGING CURRENT | 50Ah | 50Ah | 50Ah |
NOMINAL DC CHARGING CURRENT | 50Ah | 50Ah | 50Ah |
performance level | |||
MAXIMUM PERFORMANCE | 98% | 98% | 98%
|
Price without VAT
Weight | 1 kg |
---|---|
Brand |
40A - MPPT 1150 Watt 12 / 24V - With aluminum body for better cooling. New generation digital MPPT charge regulator of exceptional specifications of high input voltage up to 150V
Price without VAT
In stock
Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A
Victron charge controller, which has built-in Bluetooth for wireless and easy connection as well as a socket so you can insert-connect display and configuration screen. Even in cases of increased cloud cover where the light radiation changes constantly, with the Victron SmartSolar MPPT 150/85 MC4 Charging Controller ito improve energy harvest until 30% compare to common Charge Controllers PWM and until 10% compare to slower regulators MPPT. In addition to the system BatteryLife - an intelligent battery management system and with electronic components protected by resin, we have a complete solution for environmental protection.
Specifications
BlueSolar charge controller | MPPT 150/45 | MPPT 150/60 | MPPT 150/70 | MPPT 150/85 | MPPT 150/100 |
battery voltage | 12/24/48 V Auto Select | ||||
Rated charging current | 45A | 60A | 70A | 85A | 100A |
Maximum PV power |
12V: 650W / 24V: 1300W / 48V: 2600W |
12V: 860W / 24V: 1720W / 48V: 3440W |
12V: 1000W / 24V: 2000W / 48V: 4000W |
12V: 1200W / 24V: 2400W 48V: 4800 W |
12V: 1450W / 24V: 2900W / 48V: 5800W |
Maximum PV open circuit voltage |
150V absolute maximum coldest conditions |
||||
Maximum efficiency | 98% | ||||
Self-consumption | 10 mA | ||||
Charge voltage 'absorption' | Default setting: 14,4 / 28,8 / 43,2 / 57,6 V | ||||
Charge voltage 'float' | Default setting: 13,8 / 27,6 / 41,4 / 55,2 V | ||||
Charge algorithm | multi-stage adaptive | ||||
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | ||||
Data communication port and remote on-off |
VE.Direct | ||||
Operating temperature | -30 ° C à 60 ° C (full rated output up to 40 ° C) | ||||
Humidity (non-condensing) | Max. 95% |
Available on backorder
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Specifications
Charge Controller Type | PWM |
---|---|
System Voltage | 12V, 24V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
Price without VAT
Out of stock
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
Available on backorder
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
BlueSolar Charge controller | MPPT 100/50 |
Battery Voltage | 12 / 24V auto select |
Rated charging current | A 50 |
Nominal PV Power, 12 V 1a), 1b) | 700 W (MPPT range 15 V to 70 V resp. 95 V) |
Nominal PV Power, 24 V 1a), 1b) | 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V) |
Maximum PV open circuit voltage | 100 V |
Peak efficiency | 98% |
Self-consumption | 10 mA |
Charge voltage 'absorption' | 14,4 V / 28,8 V (adjustable) |
Charge voltage 'float' | 13,8 V / 27,6 V (adjustable) |
Charge algorithm | multi-stage adaptive |
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C |
Protection | Battery reverse polarity (fuse) / Output short circuit / Over temperature |
Operating temperature | -30 ° C to +60 ° C (full rated output up to 40 ° C) |
Humidity | 95% non-condensing |
Data Communication Port | VE.Direct |
Available on backorder
The Victron Lithium SuperPack 25,6V/50Ah battery is a Lithium battery for a large number of charge and discharge cycles for very long discharge depths.
Available on backorder
Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
Minimum order 2 pieces. Delivery 4-6 days from France
5kw with photovoltaics on roofs with Yingli Solar 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and south) εcovers an area of 35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
15 square meters covered area
Price without VAT
Out of stock
BATTERY OBM ECOAGM A-125-12 125Ah 12V C100
The 12V deep discharge batteries OBM ECOAGM 125AH are designed with AGM technology for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electric elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
accumulator.
Dimensions:406 * 173 * 209mm
Weight: 31.4kg
A 2-year warranty is provided
Price without VAT
Out of stock
5000 VA 24 Vdc 230 Vac / 50 Hz with switching system and integrated 140A battery charger.
Studer Xtender
The Studer Xtender converter is the ideal solution for complex hybrid systems. It can be adapted and connected to PV panels, small wind turbines, diesel generators and even the public electricity grid, regardless of whether it operates as a single-phase or three-phase converter.
Price without VAT
Available on backorder
BATTERY OBM ECOGEL A-100 12 100 Ah 12V C100
Deep discharge batteries OBM ECOGEL 100AH is a very reliable and quality battery solution for energy storage systems. The batteries OBM ECOGEL 100AH They provide maximum performance, resistance to overload and deep discharge while their construction is such that it provides them with high resistance to vibrations, vibrations and extreme weather phenomena.
The 12V deep discharge batteries OBM ECOGEL 100AH are designed with technology GEL (JELL) for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electrical elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
accumulator.
Dimensions:260* 168 * 208mm
Weight: 23.2kg
A 2-year warranty is provided
Price without VAT
Out of stock
Available on backorder
Not a member? Create an account
Already got an account? sign in here