Photovoltaic Ecosun ECO ES 550 watt-555 watt mono half cell Eco ES -550MONO/182-144-European certified

ECO ES 550 watt-555 watt mono: 550W Half Cell Mono Solar Panel is the most popular solar panel on the market, high power with high efficiency. Monocrystalline silicon half cell perc solar panels 550W are the best choice for ground power plant or solar installation.

With state-of-the-art MBB & Half-cut Mono PERC 182mm Cells, it has a standard industrial unit size, compatible with other companies' units and converters, more economical to change and maintain. Thanks to the Half-Cut technology, the internal resistance of the cell is reduced, which provides an additional power of the unit even in shade, cloudiness and low light conditions.

The solar panels 550W half-cell consists of high-efficiency PERC monocrystalline solar cells, which have the advantages of higher power output, better temperature coefficient, reduced shading effects on power generation and lower risk of hot spots.

Technical data

Technology Only half cells
Application
Assembled with MBB PERC cells, the half-cell configuration offers the advantages of higher output power, better temperature-dependent efficiency, reduced shading effect on power generation, lower hazardous hot spot hazard and charging.

The panel offers excellent power performance across the full spectrum of the sun, its durable frame and structure are capable of sustaining heavy snow load up to 5400 Pa and wind load up to 3600 Pa. The panel is resistant to salt spray, ammonia and blowing sand and is therefore suitable for seaside, farm or desert areas. The junction box is enclosed in the IP68 protective housing increasing its long-term weather resistance.

The manufacturer hosts a testing laboratory that is used to confirm TUV, Ul, CSA, ETL, SGS and CGC certifications. They also use this lab to ensure their product meets the highest standards.

• All panels were tested one by one during production
• The production process is controlled and monitored
• Verified parameters recorded for customer reference
• Fast replacement of defective products

Technical specifications Photovoltaic Eco 550 watt mono half cell Eco ES -550MONO/182-144-European certified

ES- MONO 550W photovoltaic panel monocrystalline ECOSUN technology high efficiency 21%
Dimensions (mm): 2384 x 1096 x 35

Electrical Characteristics

• Optimum Operating Voltage (Vmp): 31,86V
• Optimum operating current (Imp) : 17,27A
• Open Circuit Voltage (Voc) : 38,24V
• Short Circuit Voltage (Isc) : 18,28A
• Maximum power at STC (Pmax): 550W
• Maximum system voltage: 1500VDC (IEC)
• Maximum series fuse rating: 30A
• Power Tolerance: 0 to 5W
• Unit efficiency: 21,2%
• Temperature coefficient Pmax : -0,34%/°C
• Temperature Voc Factor : -0,25%/°C
• Temperature Coefficient Isc : +0,04%/°C

Mechanical Characteristics

• Cell type: 210 mm, MONO
• Number of cells : 110 (11 x 5 x 2)
• Dimension: 2384 x 1096 x 35 mm
• Βάρος: 29 kg

Minimum quantity 6 pieces 

How to choose the best 550 watt half cell photovoltaic panel

Solar Upgrade: Everything You Need to Know About 550 Watt Half Cells PERC Technology

Solar energy is becoming an increasingly popular way to reduce electricity bills and lead a sustainable lifestyle. As technology continues to evolve, it can be difficult to keep up with all the new upgrades. In this article, we will discuss the 550 watt half-cell PERC technology and what it can bring to your solar setup. Read on to find out everything you need to know about this breakthrough in solar energy!

Introduction

If you're considering a solar power upgrade for your home or business, you may have come across the term "Watt Half Cell PERC technology." But what is it? Simply put, this type of solar panel uses half-cut cells to increase efficiency. In this article, we'll explain everything you need to know about Watt Half Cell PERC technology so you can make an informed decision about whether or not it's right for your needs.

What are half cells?
A normal solar cell consists of two layers of silicon wafers (p-type and n-type) with an electrical junction in the middle. When photons from the sun hit the cell, they lose electrons from the atomic bonds that hold them in place. Electrons flow through the junction and into an external circuit where they can be used to power a load (such as a light bulb). A halved cell is simply a cell that has been cut in half horizontally so that each side has only one layer of silicon wafers.

The benefits of using half-cut cells
The main advantage of using half cells is that it increases efficiency. When a cell is cut in half, more surface area is exposed to sunlight, which means more photons can be absorbed. This increased absorption results in more electrons being released and more electricity being produced. Furthermore, since there are now two electrical nodes instead of one,

What are 550 Watt Half Cells PERC?

In order to understand what 550 watt half cell PERC technology is, it is first important to understand what a solar cell is. A solar cell is the basic unit of a solar panel, which converts sunlight into electricity. Solar panels consist of many solar cells connected together. The more cells there are in a panel, the more electricity can be produced.

Most solar panels on the market today are manufactured with standard solar silicon cells. These cells have an efficiency of about 15-20%. This means they can convert 15-20% of the sunlight hitting them into electricity.

However, there is a new type of solar cell known as PERC (passivated emitter and rear contact). PERC cells have an efficiency of about 21-23%. This means they can convert 21-23% of the sunlight hitting them into electricity.

So what is 550 watt half cell PERC technology? It simply uses PERC cells instead of standard silicon cells in order to increase the amount of electricity that can be produced from a solar panel. By using PERC cells, a solar panel can produce up to 50% more electricity than a standard silicon panel.

Minimum quantity 9 pieces