Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
MT-5 screen for MPPT Tracer controller
Price without VAT
Out of stock
MT-5 screen for charger control Epsolar - Ever MPPT Tracer The MT-5 digital Remote Meter displays system operating information, error indications and self diagnostics read-out. Information is displayed on a backlit LCD display. The large numerical display and icons are easy to read and large buttons make navigating the meter menus easy. The meter can be flush mounted in a wall or surface mounted using the mounting frame (included). The MT-5 is supplied with 2 meters of cable which connects to the RJ45 port on the Tracer.
Features:
Display the system status and parameters with digital and graphic icons.
Battery type selectable
Battery Ah setting function
Temperature compensation coefficient adjustable
User friendly interface
Manual Load Control
Specification:
Rated voltage 12V, min voltage (suggested): 8.0V
Strong backlight on <23mA
Low backlight on <20mA
Backlight and LED indicator off <17mA
Operation temperature -40 ~ ~ + 60 ℃
LCD operation temperature -10 ~ ~ + 40 ℃
Humidity 0-100%
Communication cable RJ45 (8PIN), 10 meters
Weight: 0.25kgs
The Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Price without VAT
Weight | 3 kg |
---|---|
Brand |
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Model | Victron BlueSolar MPPT 75/15 |
Part# | SCC010015050R |
battery voltage | 12/24 volt auto select |
Rated charging current | 15A |
Maximum PV power, 12V (a, b) | 200 W (MPPT range 15V to 70V resp. 95V) |
Maximum PV power, 24V (a, b) | 400 W (MPPT range 30V to 70V resp. 95V) |
Automatic load disconnect | Yes, maximum load 15A |
Maximum PV open circuit voltage | 75V |
Peak efficiency | 98% |
Self consumption | 10mA |
Charge voltage 'absorption' | 14.4V / 28.8V |
Charge voltage 'float' | 13.8V / 27.6V |
Charge algorithm | Multi-stage adaptive |
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C |
Continuous / peak load current | 15A / 50A |
Low voltage load disconnect | 11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm |
Low voltage load reconnect | 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm |
Available on backorder
Charging regulator Mppt 2210A 20A 520 watt MAX PV panel 24V with digital display (control screen) Features: • Advanced MPPT technology • High tracking efficiency no less than 99.5% • Peak conversion efficiency of 98% • Ultra-fast tracking speed • Accurately recognizing and tracking of multiple power point • Multi-function LCD displays system information intuitively • User programmable for battery types, load control etc. • 3-Stage charge with PWM output • Common positive grounding design • RS485 port with industrial standard MODBUS open architecture • Fully programmable function via PC software or remote meter
Price without VAT
Out of stock
Charging regulator MPPT 30A tracer 3215A with Digital Display model 2016. Maximum power 780 WATT in 24v PV panel
Tracer-A series is based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.
With MPPT control algorithm, in any situation, products of this series can quickly and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. There is dual display function: local LCD panel or remote meter (needs extra MT50). With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.
All-round electronic fault self-test function and enhanced electronic protection function could further avoid damages on system components resulting from installation errors or system failures.
Price without VAT
In stock
Charging regulator Mppt 4210A 40A 1040 watt MAX PV panel 24V
Features:
• Advanced MPPT technology
• High tracking efficiency no less than 99.5%
• Peak conversion efficiency of 98%
• Ultra-fast tracking speed
• Accurately recognizing and tracking of multiple power points
• Multi-function LCD displays system information intuitively
• User programmable for battery types, load control etc.
• 3-Stage charge with PWM output
• Common positive grounding design
• RS485 port with industrial standard MODBUS open architecture
• Fully programmable function via PC software or remote meter
Price without VAT
Out of stock
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
Price without VAT
Out of stock
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Waterproof / watertight charge regulator IP 67 LS1024EPD 10A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 3000W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.
Technical characteristics
Inverter off | |
---|---|
Power (W) | 1300 |
Manufacturer | VictronEnergy |
Input Voltage (V) | 24V DC |
Output Voltage (V) | 230 AC |
Performance level (%) | 94 |
IP protection | IP21 |
Weight (kg) | 10.0 |
Warranty (years) | 5 |
Other Information | Material & Color: aluminum (blue RAL 5012), Battery cables of 1.5 meter included, G-ST18i plug |
Available on backorder
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Technical Features
Model No. |
|
||||
---|---|---|---|---|---|
Electrical data | |||||
Max. Solar Input Power |
|
||||
Max. Solar Panel Open Circuit Voltage |
|
||||
Max. Solar Panel Short Circuit Current |
|
||||
Nominal System (Battery) Voltage |
|
||||
Self-Consumption |
|
||||
Peak Conversion Efficiency |
|
||||
General Data |
Available on backorder
5000VA - 230VA.C ± 5% 50Hz - RELAY TYPE STABILIZER
It has a delay switch to avoid problems when starting devices that need high current, e.g. refrigerators, pumps, air conditioners, tools etc.
Price without VAT
In stock
RENAC R1-1100-SS R1 Mini Series Inverter 1100W, Single-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
Photovoltaic panel ECO 200M power 200-205 watts Monocrystalline silicon. Suitable for autonomous PV systems only with the use of high voltage MPPT charging regulators (above 90V D open circuit) .
They have a positive tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency up to + 3% higher efficiency.
Available with 12 years factory warranty and 25 years 80% performance guarantee
Price without VAT
In stock
EPSOLAR EPEVER-UP-3000W / 24V M6322 HYBRID INVERTER / CHARGER UPower series
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum quantity 6 pieces
In stock
Cheap Autonomous photovoltaic kits for holiday homes up to 3Kwh - 3,5kwh / 24 hours
Provide economical Electricity without PPC in a caravan or cottage
Supply now without connection to the PPC network with your own Finance autonomous photovoltaic system the your cottage, caravan, caravan or any cottage. The economical autonomous photovoltaic packages 3kwh include 2 PV panels of 280 watt panels, pure sine wave inverter 800watt / 1000VA - 24V, 4 batteries of 150AH C10-165AH C100, charge regulator 20A PWM technology, installation materials, photovoltaic bases, solenoid panels, and blueprints with instructions for use for the installation.
Out of stock
Not a member? Create an account
Already got an account? sign in here