Lorentz PS150 Boost

1,270.00 
1,089.00  Excluding VAT
1,350.36  Includes VAT

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Available on backorder

  ... people are viewing this right now

  Share

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Weight 1 kg
Brand

SKU: Lorentz PS150 Boost Categories: ,

Most viewed products

Recently viewed products

  • -20%Limited
    Victron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics 920.00 
    738.00  Excluding VAT
    915.12  Includes VAT

    Victron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics

    Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 3000W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.

    Technical characteristics

    Inverter off
    Power (W) 1300
    Manufacturer VictronEnergy
    Input Voltage (V) 24V DC
    Output Voltage (V) 230 AC
    Performance level (%) 94
    IP protection IP21
    Weight (kg) 10.0
    Warranty (years) 5
    Other Information Material & Color: aluminum (blue RAL 5012), Battery cables of 1.5 meter included, G-ST18i plug

    Available on backorder

  • -16%Limited
    Victron SmartSolar MPPT 250/60
    Victron SmartSolar MPPT 250/60-Tr - MPPT 60A Photovoltaic - Wind Turbine Charging Regulator 443.00 
    373.00  Excluding VAT
    462.52  Includes VAT

    Victron SmartSolar MPPT 250/60-Tr - MPPT 60A Photovoltaic - Wind Turbine Charging Regulator

    Extremely fast maximum power efficiency (MPPT) detection

    Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Technical Features

     

    Model No.
    MPPT 250/60 MPPT 250/70 MPPT 250/85 MPPT 250/100
    Electrical data
    Max. Solar Input Power
    860/1720/3440 W 1000/2000/4000 W 1200/2400/4900 W 1450/2900/5800 W
    Max. Solar Panel Open Circuit Voltage
    250 V 250 V 250 V 250 V
    Max. Solar Panel Short Circuit Current
    A 35 A 35 A 70 A 70
    Nominal System (Battery) Voltage
    12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V
    Self-Consumption
    35 mA 35 mA 35 mA 35 mA
    Peak Conversion Efficiency
    99.00% 99.00% 99.00% 99.00%
    General Data

     

    Available on backorder

  • -20%Limited
    RENAC R1-1100-SS-grid-inverter for photovoltaics, net metering, photovoltaics on the roof, domestic
    RENAC R1-1100-SS R1 Mini Series Inverter 1100W Single Phase 470.00 
    374.00  Excluding VAT
    463.76  Includes VAT

    RENAC R1-1100-SS R1 Mini Series Inverter 1100W, Single-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

    Available on backorder

  • -27%Limited
    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V Battery Charger
    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V Battery Charger 613.75 
    450.00  Excluding VAT
    558.00  Includes VAT

    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V

    • Supports battery technologies (Wet, Mf , Vrla, Agm, Gel, Li-Ion)
    • It has Bluetooth to connect to the Victron Connect app
    • Short circuit, overload and overvoltage protections

    Available on backorder

  • -29%Limited
    2.03kW Photovoltaic PPC BASIC 4,060.00 
    2,900.00  Excluding VAT
    3,596.00  Includes VAT

     2,03 Kwatt system interconnected with PPC

    2.035 watts with photovoltaic Solar Energy Power Plus 185 watts of monocrystalline silicon with positive tolerance and more watts !!!

    It produces an average of 2600kw per year (for areas of Attica and further south) while covering an area of ​​28-32 square meters. It saves 1300-1500 euros per year and depreciates the installation cost in 4.5-5 years. 

    Price without VAT


    In stock

  • -21%Limited
    Net-metering 10kw with 10kwh lithium battery price with PV 460 WATT. Energy offset. Energy saving. subsidies, installation price.
    Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package 17,800.00 
    14,100.00  Excluding VAT
    17,484.00  Includes VAT

    Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)

    Net metering 10kw with 10kwh lithium battery  ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw  averaged per year in Southern regions.

    Price without VAT

    Available on backorder

  • -29%Limited
    Photovoltaic panel 200-205 watts Mono 199.00 
    142.00  Excluding VAT
    176.08  Includes VAT

    Photovoltaic panel ECO 200M power 200-205 watts Monocrystalline silicon.  Suitable for autonomous PV systems only with the use of high voltage MPPT charging regulators (above 90V D open circuit) . 

     They have a positive tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency up to + 3% higher efficiency.

    Available with 12 years factory warranty and 25 years 80% performance guarantee

    Price without VAT

    In stock

  • -35%Limited
    Hybrid-inverter-REVO-VM-II-Series 5_5kw-mppt. Hybrid inverter 5kw, 5.5kw for photovoltaic use without batteries
    Hybrid Inverter Any Grid SolarFam REVO VM II Series 5.5kw Imported from Holland-5500W / 48V MPPT 500V/100A 1,230.00 
    799.00  Excluding VAT
    990.76  Includes VAT

    SolarFam REVO VM II Series 5.5kw Any Grid Hybrid Inverter Imported from Holland-5500W / 24V MPPT 500V/100A

    SolarFam REVO VM II Series 5.5 The revolution in inverters – autonomous and interconnected home systems

    The only one capable of operation even WITHOUT BATTERIES

    In stock

  • -20%Limited
    3kw inverter V-TAC 3000W single phase 11369 for photovoltaic
    3KW V-TAC On-Grid Inverter 3000W Single Phase 11369 569.00 
    455.00  Excluding VAT
    564.20  Includes VAT

    3kw inverter V-TAC 3000W single phase sku: 11369 for photovoltaic

    Available on backorder

  • -22%Limited
    EPSOLAR EPEVER-UP-3000W / 24V M6322 prices technical manual
    EPSOLAR EPEVER-UP-3000W / 24V M6322 HYBRID INVERTER / CHARGER UPower series 936.00 
    729.00  Excluding VAT
    903.96  Includes VAT

    EPSOLAR EPEVER-UP-3000W / 24V M6322 HYBRID INVERTER / CHARGER UPower series

    Available on backorder

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Pump with controller Lorentz PS 150 Boost, with simple installation, without maintenance with high reliability, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category