Lorentz PS150 Boost

1,270.00 
1,089.00  Excluding VAT
1,350.36  Includes VAT

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Available on backorder

  ... people are viewing this right now

  Share

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Weight 1 kg
Brand

SKU: Lorentz PS150 Boost Categories: ,

Most viewed products

Recently viewed products

  • -31%Limited
    Closed type GEL battery
    4 SOPZV 565AH / C120 GEL closed battery 255.00 
    177.00  Excluding VAT
    219.48  Includes VAT

    Closed type photovoltaic batteries GEL 2V RES 4 SOPzV 565Ah / C120  of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.

    Capacity:

    568Ah / C120

    Dimensions: 198mm x 83mm x 568mm (Height 595 mm with poles). Weight 28.7 Kg

    Price without VAT.

    Available on backorder

  • -16%Limited
    Victron-Energy-MultiPlus-12-2000-80-32-inverter
    Victron Energy MultiPlus 12/2000/80-32 Photovoltaic inverter 1,092.00 
    918.00  Excluding VAT
    1,138.32  Includes VAT

    What is a Victron MultiPlus inverter?

    The new type MultiPlus is intended to replace the previous MultiPlus Compact series. It is a powerful pure sine wave inverter and a sophisticated battery charger with adaptive charging technology as well as a high-speed AC transfer switch, all in a compact metal frame.

    Available on backorder

  • -11%Limited
    50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline
    50A digital charging regulator with LCD & usb screen 89.00 
    79.00  Excluding VAT
    97.96  Includes VAT

    50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline

    In stock

  • -15%LimitedSOLD OUT
    Delphi Freedom 2000 293.00 
    249.00  Excluding VAT
    308.76  Includes VAT

    105AH / 12V 5-7 years lifespan.

    The price does not include VAT + shipping

    Out of stock

  • -40%Limited
    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single-phase photovoltaic, net metering, roof photovoltaic, home
    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase 754.00 
    453.00  Excluding VAT
    561.72  Includes VAT

    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

    Available on backorder

  • -16%Limited
    Victron Energy SmartSolar-MPPT-RS-450/200-Tr-Charge controller for PV
    Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics 2,299.00 
    1,932.00  Excluding VAT
    2,395.68  Includes VAT

    Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics

    Victron Energy charging regulator suitable for installations up to 200A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.

    Available on backorder

  • -29%Limited
    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter with Power 1200 VA for Photovoltaics 425.00 
    300.00  Excluding VAT
    372.00  Includes VAT

    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter 12V / 1200VA / 230V for Photovoltaics

    The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.

    The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.

    Technical Characteristics

    Power : 1200 VA

    Input voltage: 12 V DC

    Output voltage: 230 V AC

    Έξοδος: SHUKO

    Peak power: 2400 W

    Performance level : 94%

     

    Available on backorder

  • -29%Limited
    Studer C 4000-48
    Studer C 4000-48 3,147.00 
    2,249.00  Excluding VAT
    2,788.76  Includes VAT

    4000VA 48V with charger and switch relay, pure sine / 30 min

    Studer converters with integrated Compact series battery-charger
    Compact series inverters come with 3 devices - a sinusoidal inverter, a battery charger and a transfer system.

    Price without VAT

    Available on backorder

  • -26%Limited
    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 24V with WiFi / bluetooth
    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V 864.00 
    640.00  Excluding VAT
    793.60  Includes VAT

    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V

    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V

    with WiFi

    Available on backorder

  • -14%Limited
    Windy Boy 1100
    Windy Boy 1100 1,090.00 
    940.00  Excluding VAT
    1,165.60  Includes VAT

    1100W mains converter
    Special prices for the purchase of more than 3 pieces

     

    Windy Boy 1100s are inverters for supplying the grid with small and very small wind power systems and for use in remote networks. Windy Boy Inverters are compatible, like all SMA Inverters, with all communication products and are distinguished by the high protection class IP65 and the high level of SMA grid guard® network surveillance regardless of their location.

    Price without VAT

     

    In stock

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Pump with controller Lorentz PS 150 Boost, with simple installation, without maintenance with high reliability, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category