Lorentz PS150 Boost

1,270.00 
1,089.00  Excluding VAT
1,350.36  Includes VAT

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Available on backorder

  ... people are viewing this right now

  Share

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Weight 1 kg
Brand

SKU: Lorentz PS150 Boost Categories: ,

Most viewed products

Recently viewed products

  • -20%Limited
    5kW On/Off grid inverter V-TAC SKU: 11743
    5kW On/Off grid inverter Hybrid three phase V-TAC On/off Grid SKU: 11743 2,900.00 
    2,315.00  Excluding VAT
    2,870.60  Includes VAT

    5kW On/Off grid inverter V-TAC SKU: 11743 for photovoltaic

    Available on backorder

  • -29%Limited
    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter with Power 1200 VA for Photovoltaics 425.00 
    300.00  Excluding VAT
    372.00  Includes VAT

    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter 12V / 1200VA / 230V for Photovoltaics

    The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.

    The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.

    Technical Characteristics

    Power : 1200 VA

    Input voltage: 12 V DC

    Output voltage: 230 V AC

    Έξοδος: SHUKO

    Peak power: 2400 W

    Performance level : 94%

     

    Available on backorder

  • -16%Limited
    Blue Power IP67 Charger 24/8 Battery Charger (1 'Output + Si) 174.00 
    147.00  Excluding VAT
    182.28  Includes VAT

    Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
    The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.

     
    Price without VAT
  • -29%LimitedSOLD OUT
    Wind turbine SA-300 / 360Watt 550.00 
    389.00  Excluding VAT
    482.36  Includes VAT

    Wind turbine SA-300 / 360Watt includes PWM Controller with protection and electronic "braking" worth 100 €.

    Price without VAT

    Out of stock

  • -41%Limited
    Geo humus fertilizer 50 liters of organic humus-earthworm-50-liters_geo_humus-organic-fertilizer_culture
    Geo humus fertilizer 50 liters organic 49.00 
    29.00  Excluding VAT
    35.96  Includes VAT
  • -23%Limited
    Victron Easy Solar 12/1600 / 70-16 MPPT 100/50-Inverter Converter-for photovoltaics, prices.reviews
    Victron Easy Solar 24/1600 / 40-16 MPPT 100/50-Inverter Converter 1,705.00 
    1,307.00  Excluding VAT
    1,620.68  Includes VAT

    Victron Easy Solar 24/1600 / 40-16 MPPT 100/50-Inverter Converter. Victron inverters are compatible with many solar systems. For grid-connected systems, they can operate with one or two panels as well as with a battery. They also work with off-grid solar systems.

     

    Available on backorder

  • -23%Limited
    Economical autonomous Photovoltaic 3.5kwh-4.5kwh
    Economical autonomous Photovoltaic 3.5kwh-4.5kwh 1,695.00 
    1,299.00  Excluding VAT
    1,610.76  Includes VAT

    Economical autonomous photovoltaic 3.5kwh-4.5kw

    Available on backorder

  • -29%Limited
    ecoagm-115-ah-agm-vrla- batteries for photovoltaics
    ECO ECOAGM 115Ah deep discharge battery, C-100 / 12V 252.00 
    179.00  Excluding VAT
    221.96  Includes VAT

    BATTERY ECO ECOAGM 115AH 115Ah 12V C100

    Dimensions: 331 mm * 173 mm * 217 mm

    Weight: 30.3kg

    A 2-year warranty is provided

    Available on backorder

  • -15%Limited
    SmartSolar MPPT 75/10
    Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator 66.00 
    56.00  Excluding VAT
    69.44  Includes VAT

    Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator 

    Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

    With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.

    Specifications

    Model No.
    MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20
    Electrical data
    Max. Solar Input Power
    145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W
    Max. Solar Panel Open Circuit Voltage
    75 V 75 V 100 V 100 V
    Max. Solar Panel Short Circuit Current
    A 13 A 15 A 15 A 20
    Nominal System (Battery) Voltage
    12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V
    Self-Consumption
    10 mA 10 mA 10 mA 10 mA
    Peak Conversion Efficiency
    98.00% 98.00% 98.00% 98.00%

    Available on backorder

  • -23%Limited
    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller
    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller 126.29 
    97.00  Excluding VAT
    120.28  Includes VAT

    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller

    Epsolar charger suitable for installations up to 30A at 24V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.

    Available on backorder

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Pump with controller Lorentz PS 150 Boost, with simple installation, without maintenance with high reliability, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category