Lorentz PS600 HR Submersible pump

2,300.00 
1,990.00  Excluding VAT
2,467.60  Includes VAT

Pump with controller

Drop Pipe

11/4 ", 11/2" or 2 "at the NPT pump output. If the water is dirty, consider a smaller pipe size drop to increase the flow rate. This helps deplete solid particles and prevent them from accumulating in the pipe. When considering reduced tube size, consult a tube size (friction loss) graph. Pipe can be made of any standard material, rigid or flexible. A torque extractor is not required.

Price without VAT

 

Available on backorder

  ... people are viewing this right now

  Share

Pump with controller

Specifications

Lift up to 600 feet (180 m)

 

Flow rate up to 43 gpm (11,0 m3 / h)

 

Simple installation

 

No maintenance

 

High reliability and life expectancy

 

Cost-effective solution

 

 

Application

Drinking water supply

 

Watering the animals

 

Pond management

 

Irrigation

 

 

PS600 controller

A controller for direct current or battery operation, indicating system status

 

Mounted above ground (does not sink electronics)

 

Two control inputs for better pumping (protection against dry operation) and the remote control (float or pressure switch)

 

Automatic reset 20 minutes after low water protection is involved

 

Protected from reverse polarity, overload and high temperature

 

Speed ​​control, maximum pump speed adjustable to reduce the flow rate to about 30%

 

Solar mode: integrated MPPT (Maximum Power Point Tracking)

 

Battery operation: low voltage disconnect and restart when the battery recovers

 

Max. efficiency 92% (engine + controller)

 

Housing: IP 54 (sealed, weather resistant)

 

 

Pump end (PE)

High life expectancy

 

Non-return control valve

 

Dry protection running (optional)

 

Material: stainless steel (AISI 316), rubber

 

 

For HR pumps only

Helical pump rotor (positive displacement pump)

 

Only two main parts: stator and runner, in the field are repaired

 

Stat: geometry of abrasion resistant rubber

 

Runner: stainless steel, hard chrome, abrasion resistant

 

More resistant to sand damage than other types of pumps

 

Self-cleaning

 

 

Engine ECdrive 600 H / C

Brushless DC motor

 

No electronic engine media

 

They were filled with water

 

IP 68, pressure balanced, max. immersion unlimited

 

Dynamic sliding bearings, material: carbon / ceramic

 

Wetting material: stainless steel (AISI 316), POM, rubber, approved drinking water cable

 

 

Engine ECdrive 600 H / C

Brushless DC motor

 

No electronic engine media

 

They were filled with water

 

IP 68, pressure balanced, max. immersion unlimited

 

Dynamic sliding bearings, material: carbon / ceramic

 

Wetting material: stainless steel (AISI 316), POM, rubber, approved drinking water cable

 

 

Drop Pipe

11/4 ", 11/2" or 2 "at the NPT pump output. If the water is dirty, consider a smaller pipe size drop to increase the flow rate. This helps deplete solid particles and prevent them from accumulating in the pipe. When considering reduced tube size, consult a tube size (friction loss) graph. Pipe can be made of any standard material, rigid or flexible. A torque extractor is not required.

 

 

Temperature limits

Pump tip, engine: water temperature up to +104 ° F (+40 ° C)

 

Specify the temperature range in the order

 

Controller: temperature -22 to 131 ° F (-30 to +55 ° C)

 

 

Warranty

2-year manufacturer's warranty against defects in material and workmanship

 

Price without VAT

Weight 1 kg
Brand

SKU: Lorentz PS600 HR Submersible pump Categories: ,

Most viewed products

Recently viewed products

Lorentz PS 600, PUMP 12V, 24V pump,

Lorentz PS 600, PUMP 12V, 24V pump,

Pump with controller Lorentz PS 600, with simple installation, without maintenance with high reliability, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category