Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Pump with controller
Drop Pipe
11/4 ", 11/2" or 2 "at the NPT pump output. If the water is dirty, consider a smaller pipe size drop to increase the flow rate. This helps deplete solid particles and prevent them from accumulating in the pipe. When considering reduced tube size, consult a tube size (friction loss) graph. Pipe can be made of any standard material, rigid or flexible. A torque extractor is not required.
Price without VAT
Available on backorder
Pump with controller
Specifications
Lift up to 600 feet (180 m)
Flow rate up to 43 gpm (11,0 m3 / h)
Simple installation
No maintenance
High reliability and life expectancy
Cost-effective solution
Application
Drinking water supply
Watering the animals
Pond management
Irrigation
PS600 controller
A controller for direct current or battery operation, indicating system status
Mounted above ground (does not sink electronics)
Two control inputs for better pumping (protection against dry operation) and the remote control (float or pressure switch)
Automatic reset 20 minutes after low water protection is involved
Protected from reverse polarity, overload and high temperature
Speed control, maximum pump speed adjustable to reduce the flow rate to about 30%
Solar mode: integrated MPPT (Maximum Power Point Tracking)
Battery operation: low voltage disconnect and restart when the battery recovers
Max. efficiency 92% (engine + controller)
Housing: IP 54 (sealed, weather resistant)
Pump end (PE)
High life expectancy
Non-return control valve
Dry protection running (optional)
Material: stainless steel (AISI 316), rubber
For HR pumps only
Helical pump rotor (positive displacement pump)
Only two main parts: stator and runner, in the field are repaired
Stat: geometry of abrasion resistant rubber
Runner: stainless steel, hard chrome, abrasion resistant
More resistant to sand damage than other types of pumps
Self-cleaning
Engine ECdrive 600 H / C
Brushless DC motor
No electronic engine media
They were filled with water
IP 68, pressure balanced, max. immersion unlimited
Dynamic sliding bearings, material: carbon / ceramic
Wetting material: stainless steel (AISI 316), POM, rubber, approved drinking water cable
Engine ECdrive 600 H / C
Brushless DC motor
No electronic engine media
They were filled with water
IP 68, pressure balanced, max. immersion unlimited
Dynamic sliding bearings, material: carbon / ceramic
Wetting material: stainless steel (AISI 316), POM, rubber, approved drinking water cable
Drop Pipe
11/4 ", 11/2" or 2 "at the NPT pump output. If the water is dirty, consider a smaller pipe size drop to increase the flow rate. This helps deplete solid particles and prevent them from accumulating in the pipe. When considering reduced tube size, consult a tube size (friction loss) graph. Pipe can be made of any standard material, rigid or flexible. A torque extractor is not required.
Temperature limits
Pump tip, engine: water temperature up to +104 ° F (+40 ° C)
Specify the temperature range in the order
Controller: temperature -22 to 131 ° F (-30 to +55 ° C)
Warranty
2-year manufacturer's warranty against defects in material and workmanship
Price without VAT
Weight | 1 kg |
---|---|
Brand |