Blue Power IP67 Charger 24/12 Battery Charger (1 'Output + Si)

Blue Power Battery Charger Blue Power IP 67 fully protected charger: waterproof, with protection against shocks and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.

Stop start
Models with suffix (1 + Si) have a limited second current output which is always supplied if there is a voltage of 180 - 265 VAC at the input. This output can, for example, be used to prevent the vehicle from starting before the battery charger is disconnected (start stop function).

The highest performance ever achieved!
Creating a new standard in the industry: with an efficiency of at least 92%, these chargers have three to four times less heat loss. And once the battery is fully charged, power consumption is reduced to less than 1W, which is about five to ten times better than the industry standard.

Charger BluePower IP65 fully protected: waterproof, with protection against shock and ignition. The Blue Power charger is not at risk from water, oils or dirt. The housing is made of die-cast aluminum and the electronic components are made in resin molds.

Specifications

Specifications

Blue Power Battery Charger Fully Encapsulated: Waterproof, Shockproof and Fireproof
Water, oil or dirt will not damage the Blue Power IP67 charger. The housing is made of die-cast aluminum and the electronics are molded in resin.

Interrupt start
Models with suffix (1+Si) have a second limited current output that is always powered as long as 180 – 265 VAC is present at the input. This output can for example be used to prevent a vehicle from starting before disconnecting the battery charger (start stop function).

The highest performance ever!
Setting a new industry standard: with an efficiency of 92% or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption drops to less than one watt, about five to ten times better than the industry standard.

Adaptive 4-stage charging algorithm: bulk – absorb – float – store
Blue Power Charger features a microprocessor-controlled "adaptive" battery management. The "adaptive" mode will automatically optimize the charging process in relation to how the battery is used.

Less maintenance and aging when the battery is not in use: storage function
The storage mode is activated whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize outgassing and corrosion of the positive plates. Once a week the voltage is increased back to the absorption level to "balance" the battery. This feature prevents electrolyte stratification and sulfation, a major cause of premature battery failure.

Price without VAT