10A PWM charge regulator LS1024

19.00 
11.50  Excluding VAT
14.26  Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

  ... people are viewing this right now

  Share

The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -20%LimitedSOLD OUT
    Single-phase with DC switch

    Out of stock

  • -20%Limited
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) -for photovoltaics and wind turbines
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) 297.60 
    237.60  Excluding VAT
    294.62  Includes VAT

    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100). The batteries require minimal maintenance (have a transparent container for easy control of the electrolyte level) and have excellent load recovery performance after full discharge.

    In stock

  • -28%LimitedSOLD OUT
    PHOTOVOLTAIC SE 370watt - 380 W PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS
    SE 370W - 380 WATT PHOTOVOLTAIC PANEL EUROPEAN 199.00 
    143.00  Excluding VAT
    177.32  Includes VAT

    Solar Energy SE 370W - 380 WATT  PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS

    Out of stock

  • -22%Limited
    10 kW interconnected photovoltaic
    Photovoltaic solar energy: Photovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO/182-144-European certified for autonomous photovoltaics - net metering - roof photovoltaics
    10kW PPC Photovoltaic ECO 545 Solar on roofs 6,800.00 
    5,300.00  Excluding VAT
    6,572.00  Includes VAT

    10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation

    Photovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO / 182-144-European certified for autonomous photovoltaic- net metering - roof photovoltaics

    Photovoltaic Eco 545

    See all offers here

     

    Available on backorder

  • -29%Limited
    LS2024EPD 20A PWM Charging regulator waterproof 42.00 
    29.90  Excluding VAT
    37.08  Includes VAT

    Waterproof / watertight charge regulator IP 67  LS2024EPD 20A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

    Price without VAT

    In stock

  • -26%LimitedSOLD OUT
    Effect BTL12V 80AH 189.00 
    139.00  Excluding VAT
    172.36  Includes VAT

    80AH / 12V deep discharge closed type 10 years service life.

    The price does not include VAT + shipping

    Minimum order 2 pieces

    Out of stock

  • 4 PzS 560PB 2V Deep discharge SUNLIGHT battery 123.00 
    116.20  Excluding VAT
    144.09  Includes VAT

    4 PzS 560PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 560Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 560 [AH]
    Length 198 [mm]
    Width 83 [mm]
    Height 688 [mm]
    Weight 31.800 [kg]
    Ind NO

    In stock

  • -25%Limited
    Net-metering 5kw with PV 450 WATT for tiled roof - prices
    Net metering 5kW photovoltaic package with 450 watt panels 3,650.00 
    2,750.00  Excluding VAT
    3,410.00  Includes VAT

    Net metering 5kW photovoltaic package offer 

    11 Photovoltaic panels 450 watts

    Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty

    Tile roof supports for 11 PV panels.

    In stock

  • -39%LimitedSOLD OUT
    Photovoltaic Park 20kw
    Photovoltaic Park 20kw with trackers 110,000.00 
    67,000.00  Excluding VAT
    83,080.00  Includes VAT

    20 kw (19.780wp) photovoltaic station with solar tracking system (trackers)

    Provided through European Union certifications, a factory guarantee for the efficiency of the photovoltaic panels (panels) for 25 years for 80%. Shelf life of photovoltaic panels 45-50 years.

    Price without VAT

    Out of stock

  • Victron 12V/38Ah AGM Deep Cycle Battery 127.00 
    125.00  Excluding VAT
    155.00  Includes VAT

    Victron 12V/38Ah AGM Deep Cycle Battery

    Victron 12V/38Ah AGM Deep Cycle closed type photovoltaic deep discharge battery from Victron Energy for high starting amperes.

    Available on backorder

PWM Solar Charger 10A, charge regulator,

PWM Solar Charger 10A, charge regulator,

Regulator Programmable with night mode - PWM Solar Charger 10A, has a light sensor and timer, prices

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category