10A PWM charge regulator LS1024

19.00 
11.50  Excluding VAT
14.26  Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

  ... people are viewing this right now

  Share

The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -20%LimitedSOLD OUT
    Single-phase with DC switch

    Out of stock

  • -20%Limited
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) -for photovoltaics and wind turbines
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) 297.60 
    237.60  Excluding VAT
    294.62  Includes VAT

    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100). The batteries require minimal maintenance (have a transparent container for easy control of the electrolyte level) and have excellent load recovery performance after full discharge.

    In stock

  • -28%LimitedSOLD OUT
    PHOTOVOLTAIC SE 370watt - 380 W PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS
    SE 370W - 380 WATT PHOTOVOLTAIC PANEL EUROPEAN 199.00 
    143.00  Excluding VAT
    177.32  Includes VAT

    Solar Energy SE 370W - 380 WATT  PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS

    Out of stock

  • -29%Limited
    LS2024EPD 20A PWM Charging regulator waterproof 42.00 
    29.90  Excluding VAT
    37.08  Includes VAT

    Waterproof / watertight charge regulator IP 67  LS2024EPD 20A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

    Price without VAT

    In stock

  • -26%LimitedSOLD OUT
    Effect BTL12V 80AH 189.00 
    139.00  Excluding VAT
    172.36  Includes VAT

    80AH / 12V deep discharge closed type 10 years service life.

    The price does not include VAT + shipping

    Minimum order 2 pieces

    Out of stock

  • 4 PzS 560PB 2V Deep discharge SUNLIGHT battery 123.00 
    116.20  Excluding VAT
    144.09  Includes VAT

    4 PzS 560PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 560Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 560 [AH]
    Length 198 [mm]
    Width 83 [mm]
    Height 688 [mm]
    Weight 31.800 [kg]
    Ind NO

    In stock

  • -42%Limited
    Photovoltaic Luxor LX-565M/144 N-Type TopCon MBB (Mono) - Germany - German Certification
    565 Watt Photovoltaic Luxor LX-565M/144 N-Type TopCon MBB (Mono)-Germany 229.00 
    132.00  Excluding VAT
    163.68  Includes VAT

    Photovoltaic Luxor LX-565M/144 N-Type for interconnected net metering, net billing systems

    Suitable for net billing, net-metering, home PV, parks and PV plants

    Minimum quantity 9 pieces 

    In stock

  • -21%LimitedSOLD OUT
    Charging Regulator LS3024 30A PWM 34.10 
    27.00  Excluding VAT
    33.48  Includes VAT

    30A continuous operation and programmable charge regulator.

    Price without VAT

    Out of stock

  • -29%LimitedSOLD OUT
    5KW Solar Energy Plus 250wp 6,930.00 
    4,950.00  Excluding VAT
    6,138.00  Includes VAT

    5kw with photovoltaics with Solar Energy Plus 250 watts of polycrystalline silicon with a positive watt tolerance !!!

    It produces an average of 6500kw per year (for areas of Attica and south) while it covers an area of ​​35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.

    Price without VAT

     

    Out of stock

  • -29%Limited
    Axitec Solar photovoltaic panel 245 watts 222.60 
    159.00  Excluding VAT
    197.16  Includes VAT

    High efficiency photovoltaic AXitec 245-250 Watt with positive tolerance and 10 years factory warranty.

    Price without VAT

    In stock

PWM Solar Charger 10A, charge regulator,

PWM Solar Charger 10A, charge regulator,

Regulator Programmable with night mode - PWM Solar Charger 10A, has a light sensor and timer, prices

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category