Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
- You cannot add that amount of "Battery Charger Cotek CX2425 - 24V - 25A - 230VAC" to the cart because there is not enough stock (0 remaining).
10A PWM charge regulator LS1024
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
... people are viewing this right now
The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
| Weight | 1 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT
56.00 € Excluding VAT
69.44 € Includes VAT
Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
LS2024EU 20A PWM-USB Charging regulator
28.00 €
14.50 € Excluding VAT
17.98 € Includes VAT
14.50 € Excluding VAT
17.98 € Includes VAT
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Related products
CHARGING REGULATOR PHOCOS CX-10 12V-24V-10A
37.00 €
29.00 € Excluding VAT
35.96 € Includes VAT
29.00 € Excluding VAT
35.96 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 10A / 10A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
CHARGING REGULATOR PHOCOS CX-20 12 / 24V - 20A
45.00 €
37.00 € Excluding VAT
45.88 € Includes VAT
37.00 € Excluding VAT
45.88 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
Hybrid Controller 600W
199.00 €
149.00 € Excluding VAT
184.76 € Includes VAT
149.00 € Excluding VAT
184.76 € Includes VAT
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT
49.00 € Excluding VAT
60.76 € Includes VAT
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VAT
19.00 € Excluding VAT
23.56 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Charge Controller Type | PWM |
|---|---|
| System Voltage | 12V, 24V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
DIGITAL INSTRUMENT FOR CXN 12V / 24V SERIES
35.22 €
26.00 € Excluding VAT
32.24 € Includes VAT
26.00 € Excluding VAT
32.24 € Includes VAT
DIGITAL INSTRUMENT FOR CXN 12V / 24V SERIES
Price without VAT
Out of stock
Phocos CXN 40 40A digital charge regulator
129.00 €
72.00 € Excluding VAT
89.28 € Includes VAT
72.00 € Excluding VAT
89.28 € Includes VAT
Phocos CXN 40 40A digital charge regulator
Price without VAT
Out of stock
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT
22.00 € Excluding VAT
27.28 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Phocos CXN 20
69.00 €
60.00 € Excluding VAT
74.40 € Includes VAT
60.00 € Excluding VAT
74.40 € Includes VAT
Phocos CXN 20 CHARGING REGULATOR PHOCOS 12V-24V 20A for autonomous photovoltaics
Price without VAT
Out of stock
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
495.00 €
379.00 € Excluding VAT
469.96 € Includes VAT
379.00 € Excluding VAT
469.96 € Includes VAT
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
Price without VAT
In stock
Charging regulator LS0512EU 5A PWM
19.00 €
8.50 € Excluding VAT
10.54 € Includes VAT
8.50 € Excluding VAT
10.54 € Includes VAT
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VAT565 watts now available
LUXOR 565W N-Type TopCon LX-565TC M/144/N-TYPE/FS35/SW/16B/1500V Dimensions 2279x1134x35. Information here
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
Recently viewed products
-
Communication charge regulator cable CC-RS485B-RS485-150U
11.00 €
7.70 € Excluding VAT
9.55 € Includes VATCharging regulator cable Communication cable CC-RS485B-RS485-150U for charging regulators of Epsolar for Tracer Viewstar, VS Landstar, LS series Solar Charge Controller
Price without VAT
In stock
-
5kw Mitsubishi Electric
7,280.00 €
5,200.00 € Excluding VAT
6,448.00 € Includes VAT5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
-
6 PzS 930PB 2V Deep discharge SUNLIGHT battery
184.00 €
178.50 € Excluding VAT
221.34 € Includes VAT6 PzS 930PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 930Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage 2 Capacity (C5) 775 [AH] Length 198 [mm] Width 119 [mm] Height 713 [mm] Height with poles 740 [mm] Weight 50.500 [kg] Ind NO Applications
In stock
-
Net-metering-Solar-Energy-5kw-PPC
4,860.00 €
3,190.00 € Excluding VAT
3,955.60 € Includes VAT5kw with photovoltaic net metering with PV PANEL Solar Energy Plus
440-445 watt silicon with positive watt tolerance !!!Price without VAT
Available on backorder
-
Xantrex DR 1524 E
1,139.00 €
869.00 € Excluding VAT
1,077.56 € Includes VAT1500 VA 24V converter with integrated charger and metal relay
Price without VAT
Out of stock
-
Effect-BTG-12-120D
336.00 €
215.00 € Excluding VAT
266.60 € Includes VAT120AH / 12V 10-12 years Gel life
Out of stock
-
Goodwe GW10KT-DT 620V mains inverter
1,690.00 €
1,361.00 € Excluding VAT
1,687.64 € Includes VATGoodwe GW10KT-DT 620V network inverter for interconnected net metering system
Available on backorder
-
3 PzB 315 2V Deep discharge SUNLIGHT battery
82.00 €
77.33 € Excluding VAT
95.89 € Includes VAT3 PzB 315 2V SUNLIGHT deep discharge battery. Traction battery - open type with liquids, with 2500 cycles at 50% COMING and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily power to your industrial or commercial vehicles.
Out of stock
-
Victron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator
586.00 €
493.00 € Excluding VAT
611.32 € Includes VATVictron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Model No. MPPT 250/60 MPPT 250/70 MPPT 250/85 MPPT 250/100 Electrical data Max. Solar Input Power 860/1720/3440 W 1000/2000/4000 W 1200/2400/4900 W 1450/2900/5800 W Max. Solar Panel Open Circuit Voltage 250 V 250 V 250 V 250 V Max. Solar Panel Short Circuit Current A 35 A 35 A 70 A 70 Nominal System (Battery) Voltage 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V Self-Consumption 35 mA 35 mA 35 mA 35 mA Peak Conversion Efficiency 99.00% 99.00% 99.00% 99.00% General Data Available on backorder
-
PZSX 210 AH
116.00 €
85.00 € Excluding VAT
105.40 € Includes VAT210 Ah 2V with a lifespan of 12 years
CLUB TYPE COUNTRY R.EKF R. FORT. A BAR. DIMENSIONS (THOUSAND) EACH VALUE KIDDING ELEMENT AH @ 5H A @ 5H Arch. End M.Y. Χ Ψ Υ S.Y € 105 2 EPzS 210 210 42 34 8 13,4 47 198 510 540 58,31 price without VAT
In stock
