Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron SmartSolar MPPT 150/35 - Charging Regulator MPPT 35A Photovoltaic - Wind Turbines
166.00 € Excluding VAT
205.84 € Includes VAT
Victron SmartSolar MPPT 150/35 - Charging Regulator MPPT 35A Photovoltaic - Wind Turbines
Extremely fast maximum power efficiency (MPPT) detection
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| SmartSolar charge controller | MPPT 150/35 |
| battery voltage | 12/24 / 48V Auto Select (36V: manual) |
| Maximum battery current | A 35 |
| Nominal PV power, 12V 1a, b) | 500 W (MPPT range 15 V to 130 V) |
| Nominal PV power, 24V 1a, b) | 1000 W (MPPT range 30 V to 130 V) |
| Nominal PV power, 48V 1a, b) | 2000 W (MPPT range 60 V to 130 V) |
| Max. PV short circuit current 2) | 40A |
| Maximum PV open circuit voltage | 150 V |
| Peak efficiency | 98% |
| Self consumption | 10 mA |
Available on backorder
... people are viewing this right now
Victron SmartSolar MPPT 150/35 – Charge Controller MPPT 35A for Photovoltaics – Wind Turbines
Victron SmartSolar MPPT
Victron SmartSolar MPPT Especially in the case of cloudy skies, or when the light intensity is constantly changing, a super-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Its battery charge regulators Victron, thanks to the technology of quickly finding the maximum power performance point (MPPT) from photovoltaic panels, even under shading conditions, they promise the fastest possible charging of the batteries of the autonomous photovoltaic system, with a view to the safety of the equipment and ensuring the required charging voltage of the batteries for their correct and long-term smooth operation.
Victron SmartSolar MPPT
Excellent perfomance
No need for a cooling fan. Maximum efficiency exceeds 98%.
Flexible charging algorithm
Fully programmable charging algorithm and 8 pre-installed charging algorithms with optional rotary switch.
Complete electronic protection
Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.
Short-circuit protection in photovoltaics and protection against polarity reversal.
Reverse current protection.
Internal temperature sensor
Monitors and compensates the temperature of the device by controlling the fluctuating voltage of the batteries.
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For wired connection to the color control panel, computer or other devices.
Remote activation / deactivation
For connection to a VE.BUS BMS system.
Programmable relay output (relay)
The programmable relay can be programmed (even with a smartphone) to send alarm signals or start a generator.
Optional equipment: connection to LCD screen
An LCD screen can be attached by simply removing the protective cover from the front of the device, allowing direct monitoring of critical sizes.
Victron SmartSolar MPPT
Top Features:
Extremely fast maximum power efficiency (MPPT) detection
Advanced finding of optimal power efficiency in case of partial shading
Load output for small models
Battery life: intelligent battery management with load cut-off
Automatic battery voltage detection
Flexible charging algorithm
Overheating protection and automatic reduction of output power to protect the device when the temperature is high
GX Color Control Code
All Victron Energy MPPT Charge battery chargers are compatible with the GX Color Control Code which offers intuitive control and easy tracking for all products associated with it.
VRM Online Portal
In addition to tracking and verifying products with the GX color control code, information can be sent to the VICTRON tracking website at no extra charge.
| SmartSolar charge controller | MPPT 150/35 |
| battery voltage | 12/24 / 48V Auto Select (36V: manual) |
| Maximum battery current | A 35 |
| Nominal PV power, 12V 1a, b) | 500 W (MPPT range 15 V to 130 V) |
| Nominal PV power, 24V 1a, b) | 1000 W (MPPT range 30 V to 130 V) |
| Nominal PV power, 48V 1a, b) | 2000 W (MPPT range 60 V to 130 V) |
| Max. PV short circuit current 2) | 40A |
| Maximum PV open circuit voltage | 150 V |
| Peak efficiency | 98% |
| Self consumption | 10 mA |
| Weight | 1.3 kg |
|---|---|
| Brand |
you may also like...
Victron SmartSolar MPPT 100/30 - Photovoltaic - Wind Turbine Charging Regulator
137.00 €
116.00 € Excluding VAT
143.84 € Includes VAT
116.00 € Excluding VAT
143.84 € Includes VAT
Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | Present in several = 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
Available on backorder
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
97.00 €
82.00 € Excluding VAT
101.68 € Includes VAT
82.00 € Excluding VAT
101.68 € Includes VAT
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Victron SmartSolar MPPT 100/15 - 15A Photovoltaic Charging Regulator
84.00 €
71.00 € Excluding VAT
88.04 € Includes VAT
71.00 € Excluding VAT
88.04 € Includes VAT
Victron SmartSolar MPPT 100/15 - Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Victron SmartSolar MPPT 100/50 - Charging Regulator MPPT 50Α Photovoltaic - Wind Turbines
197.00 €
166.00 € Excluding VAT
205.84 € Includes VAT
166.00 € Excluding VAT
205.84 € Includes VAT
Victron SmartSolar MPPT 100/50 - Charging Regulator MPPT 50Α Photovoltaic - Wind Turbines
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | Present in several = 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
Available on backorder
Related products
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
Charging regulator LS0512EU 5A PWM
19.00 €
8.50 € Excluding VAT
10.54 € Includes VAT
8.50 € Excluding VAT
10.54 € Includes VAT
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
484.00 €
279.00 € Excluding VAT
345.96 € Includes VAT
279.00 € Excluding VAT
345.96 € Includes VAT
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
Epsolar Dual Battery PWM 10A
35.00 €
29.00 € Excluding VAT
35.96 € Includes VAT
29.00 € Excluding VAT
35.96 € Includes VAT
10A Dual Battery PWM charge regulator for 2 batteries.
Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection
Specification:
| Electrical parameters | |
| System voltage | 12 / 24VDC Auto work |
| Nominal battery current | 10A |
| Charge circuit voltage drop | .0.26V |
| Discharge circuit voltage drop | .0.15V |
| Self consumption | ≤ 6mA |
| Working temperature | -35 ℃ to + 55 ℃ |
| Humidity | 10% -90% NC |
| Enclosure | IP30 |
| Port | 4mm2 |
| Net weight | 0.15KG |
Price without VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Hybrid Controller 600W
199.00 €
149.00 € Excluding VAT
184.76 € Includes VAT
149.00 € Excluding VAT
184.76 € Includes VAT
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT
48.00 € Excluding VAT
59.52 € Includes VAT
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
CHARGING REGULATOR PHOCOS CX-40 12 / 24V - 40A
97.30 €
67.00 € Excluding VAT
83.08 € Includes VAT
67.00 € Excluding VAT
83.08 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
Out of stock
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT
56.00 € Excluding VAT
69.44 € Includes VAT
Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
5kw Mitsubishi Electric
7,280.00 €
5,200.00 € Excluding VAT
6,448.00 € Includes VAT5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Recently viewed products
-
Network Inverter ABB TRIO-27.6-TL-OUTD-S2X-400 INT
4,240.00 €
3,385.16 € Excluding VAT
4,197.60 € Includes VATNetwork Inverter ABB TRIO-27.6-TL-OUTD-S2X-400 INT Three phase converter
Out of stock
-
MPPT charge regulator 150V / 40A high efficiency 12v / 24v regulator
199.00 €
149.00 € Excluding VAT
184.76 € Includes VATECO MPPT ES 150V / 40A charge regulator with the possibility of increasing the efficiency up to 30%
Charging regulators ECO MPPT ES 150 / 40A for autonomous photovoltaic systems have a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system up to 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
They are real MPPT charging regulators with 150V open circuit input voltage at 40A and not false MPPT-PWM low voltage
They have a digital operating screen and a built-in datalogger
Circuit protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.Character:
MPPT photovoltaic charge regulator power 600W - 12V, 1200W - 24V.
Battery voltage 12V / 24V - 40A, photovoltaic voltage 150V, choice of night mode.
Maximum charging current: 40 A.
System voltage: 12/24 V
Price without VAT
Out of stock
-
MC4 female terminal
3.90 €
2.95 € Excluding VAT
3.66 € Includes VATMC4 Female MC4 Solar Connector Female for secure data protection.
Price without VAT
-
Wind turbine 1000 -1100 watts up to 1500 watts / 24v
1,580.00 €
995.00 € Excluding VAT
1,233.80 € Includes VATWind turbine 1000 watt - 1100 watt 24v with maximum power / 1500 watt * max / 24v high quality aluminum and Marine type durability for use near the sea.
Price without VAT
Out of stock
-
5 PzS 700PB 2V Deep discharge SUNLIGHT battery
150.00 €
141.70 € Excluding VAT
175.71 € Includes VAT5 PzS 700PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 700Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage 2 Capacity (C5) 700 [AH] Length 198 [mm] Width 101 [mm] Height 688 [mm] Weight 39.300 [kg] Ind NO Applications
In stock
-
Charging regulator 10A / 12V PWM Epsolar / EPEVER LS1012E 10A
19.90 €
11.00 € Excluding VAT
13.64 € Includes VATEconomical and reliable Charging regulator 10A / 12V technology PWM Epsolar / EPEVER LS1012E 10A 12V for autonomous photovoltaic systems.
Provides immediacy and ease of adjustment, suitable for small home autonomous photovoltaic systems up to 160 watts / 12v
Increases battery life and installation performance.Voltage: 12V
Rated Current: 10A
Maximum battery voltage: 16V
Maximum open circuit voltage of PV panel 30VPrice without VAT
Out of stock
-
SMA Sunny Boy STP -5000TL - 5.0-3AV-40-20 NEW PRC SERIES
1,780.00 €
1,193.00 € Excluding VAT
1,479.32 € Includes VAT5000W mains converter
Special prices for the purchase of more than 3 pieces
With the Sunny Boy Multi-String Converters you can implement photovoltaic installations in the Middle and Upper Power Range with maximum efficiency.
Price without VAT
Available on backorder
-
WIND GENERATOR Eco Air 500/550 WATT MAX
637.00 €
499.00 € Excluding VAT
618.76 € Includes VATWIND GENERATOR ECO Obm 500final match. WATT MAX
The wind turbine ECO Obm 500 with a maximum power of 550W is a very reliable solution able to ensure you a low bill from the electricity provider or autonomy in cases where the electricity grid is not available. The wind turbine with high quality construction materials and state-of-the-art technologies ECO Obm 500 It can generate electricity even in low wind levels while the 20-month warranty that accompanies it ensures its long-term operation without problems and unwanted interruptions.
General characteristics
State-of-the-art materials for reliable and high quality energy production.
Body made of high quality aluminum lining.
Long service life.
High quality materials.
Tested in extreme weather conditions.
Silent mode.
Low construction weight.
Easy installation and operating instructions.
Out of stock
-
450watt wind turbine
859.00 €
489.00 € Excluding VAT
606.36 € Includes VATWind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
-
Net-metering & Autonomous 10kw with battery Hybrid Set On/Off Grid 10kW with 24 PV panels 410W + battery 10kw SKU: 100173
13,500.00 €
10,400.00 € Excluding VAT
12,896.00 € Includes VATNet-metering & Autonomous 10kw with lithium battery – Consists of
24 PV panels 410 watts / Mono half cells SKU: 11550 x 2 sets V-TAC
Three Phase Hybrid On/Off-Grid Inverter 10KW with LCD Display IP65 V-TAC SKU: 11542 V-TAC
LiFePO4 Rack 9.6KWh 48V 200Ah Lithium Battery for Solar Inverter SKU: 11523 V-TAC
Available on backorder
