Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron SmartSolar MPPT 150/35 - Charging Regulator MPPT 35A Photovoltaic - Wind Turbines
166.00 € Excluding VAT
205.84 € Includes VAT
Victron SmartSolar MPPT 150/35 - Charging Regulator MPPT 35A Photovoltaic - Wind Turbines
Extremely fast maximum power efficiency (MPPT) detection
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
| SmartSolar charge controller | MPPT 150/35 |
| battery voltage | 12/24 / 48V Auto Select (36V: manual) |
| Maximum battery current | A 35 |
| Nominal PV power, 12V 1a, b) | 500 W (MPPT range 15 V to 130 V) |
| Nominal PV power, 24V 1a, b) | 1000 W (MPPT range 30 V to 130 V) |
| Nominal PV power, 48V 1a, b) | 2000 W (MPPT range 60 V to 130 V) |
| Max. PV short circuit current 2) | 40A |
| Maximum PV open circuit voltage | 150 V |
| Peak efficiency | 98% |
| Self consumption | 10 mA |
Available on backorder
... people are viewing this right now
Victron SmartSolar MPPT 150/35 – Charge Controller MPPT 35A for Photovoltaics – Wind Turbines
Victron SmartSolar MPPT
Victron SmartSolar MPPT Especially in the case of cloudy skies, or when the light intensity is constantly changing, a super-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Its battery charge regulators Victron, thanks to the technology of quickly finding the maximum power performance point (MPPT) from photovoltaic panels, even under shading conditions, they promise the fastest possible charging of the batteries of the autonomous photovoltaic system, with a view to the safety of the equipment and ensuring the required charging voltage of the batteries for their correct and long-term smooth operation.
Victron SmartSolar MPPT
Excellent perfomance
No need for a cooling fan. Maximum efficiency exceeds 98%.
Flexible charging algorithm
Fully programmable charging algorithm and 8 pre-installed charging algorithms with optional rotary switch.
Complete electronic protection
Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.
Short-circuit protection in photovoltaics and protection against polarity reversal.
Reverse current protection.
Internal temperature sensor
Monitors and compensates the temperature of the device by controlling the fluctuating voltage of the batteries.
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For wired connection to the color control panel, computer or other devices.
Remote activation / deactivation
For connection to a VE.BUS BMS system.
Programmable relay output (relay)
The programmable relay can be programmed (even with a smartphone) to send alarm signals or start a generator.
Optional equipment: connection to LCD screen
An LCD screen can be attached by simply removing the protective cover from the front of the device, allowing direct monitoring of critical sizes.
Victron SmartSolar MPPT
Top Features:
Extremely fast maximum power efficiency (MPPT) detection
Advanced finding of optimal power efficiency in case of partial shading
Load output for small models
Battery life: intelligent battery management with load cut-off
Automatic battery voltage detection
Flexible charging algorithm
Overheating protection and automatic reduction of output power to protect the device when the temperature is high
GX Color Control Code
All Victron Energy MPPT Charge battery chargers are compatible with the GX Color Control Code which offers intuitive control and easy tracking for all products associated with it.
VRM Online Portal
In addition to tracking and verifying products with the GX color control code, information can be sent to the VICTRON tracking website at no extra charge.
| SmartSolar charge controller | MPPT 150/35 |
| battery voltage | 12/24 / 48V Auto Select (36V: manual) |
| Maximum battery current | A 35 |
| Nominal PV power, 12V 1a, b) | 500 W (MPPT range 15 V to 130 V) |
| Nominal PV power, 24V 1a, b) | 1000 W (MPPT range 30 V to 130 V) |
| Nominal PV power, 48V 1a, b) | 2000 W (MPPT range 60 V to 130 V) |
| Max. PV short circuit current 2) | 40A |
| Maximum PV open circuit voltage | 150 V |
| Peak efficiency | 98% |
| Self consumption | 10 mA |
| Weight | 1.3 kg |
|---|---|
| Brand |
you may also like...
Victron SmartSolar MPPT 100/15 - 15A Photovoltaic Charging Regulator
84.00 €
71.00 € Excluding VAT
88.04 € Includes VAT
71.00 € Excluding VAT
88.04 € Includes VAT
Victron SmartSolar MPPT 100/15 - Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Victron SmartSolar MPPT 100/50 - Charging Regulator MPPT 50Α Photovoltaic - Wind Turbines
197.00 €
166.00 € Excluding VAT
205.84 € Includes VAT
166.00 € Excluding VAT
205.84 € Includes VAT
Victron SmartSolar MPPT 100/50 - Charging Regulator MPPT 50Α Photovoltaic - Wind Turbines
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
Available on backorder
Victron SmartSolar MPPT 100/30 - Photovoltaic - Wind Turbine Charging Regulator
137.00 €
116.00 € Excluding VAT
143.84 € Includes VAT
116.00 € Excluding VAT
143.84 € Includes VAT
Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
Available on backorder
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
97.00 €
82.00 € Excluding VAT
101.68 € Includes VAT
82.00 € Excluding VAT
101.68 € Includes VAT
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Related products
WATERPROOF CHARGING REGULATOR LS1024BP
57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT
32.00 € Excluding VAT
39.68 € Includes VAT
Charging regulator waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans
Price without VAT
In stock
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
484.00 €
279.00 € Excluding VAT
345.96 € Includes VAT
279.00 € Excluding VAT
345.96 € Includes VAT
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
20A Solar Charger PWM LS2024
19.00 €
13.50 € Excluding VAT
16.74 € Includes VAT
13.50 € Excluding VAT
16.74 € Includes VAT
20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
| Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 | ||
Out of stock
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A
139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT
113.00 € Excluding VAT
140.12 € Includes VAT
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT
22.00 € Excluding VAT
27.28 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
Hybrid Controller 600W
199.00 €
149.00 € Excluding VAT
184.76 € Includes VAT
149.00 € Excluding VAT
184.76 € Includes VAT
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VAT
19.00 € Excluding VAT
23.56 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Charge Controller Type | PWM |
|---|---|
| System Voltage | 12V, 24V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A Economy Charger regulator for photovoltaic systems
19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
- 10A battery charger for photovoltaic frame 12v 160 watt
- With program number display and load connection output with night mode scheduling.
- Suitable for 12V or 24V batteries (automatic selection).
- Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
- Maximum input voltage 41V.
- Maximum voltage drop during charging 0,2V.
- Maximum operating current 10A.
- Warranty: 14 months.
Price without VAT
Out of stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
229.00 €
119.00 € Excluding VAT
147.56 € Includes VAT565 watts now available
LUXOR 565W N-Type TopCon LX-565TC M/144/N-TYPE/FS35/SW/16B/1500V Dimensions 2279x1134x35. Information here
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Recently viewed products
-
Bosch Solar photovoltaic panel 245 watts
315.00 €
195.00 € Excluding VAT
241.80 € Includes VATHigh efficiency photovoltaic Bosch 240 Watt with 10 years factory warranty.
Bosch Solar Energy AG
Bosch Solar Energy AG was founded in 1997 when the former company Ersol AG was acquired by Bosch GmbH. Today, Bosch Solar Energy is a fully autonomous subsidiary of the group and having as its main equipment Ersol AG's long experience in the photovoltaic market and the exceptional quality standards of Bosch GmbH, has all the guarantees for the manufacture of photovoltaic panels, according to stricter German standards.
BS c-Si M 60 230-24560 cells, mono (6 ")
- Guaranteed performance of photovoltaic panel with positive power tolerance up to +4,99 Wp
- Top quality construction thanks to the use of the company's production cells
- Exclusive use of branded accessories, accompanied by high quality warranty certificates
Minimum order 12 pieces
Unit price without VAT.
In stock
-
Sunlight SP_B 12-120
245.00 €
189.00 € Excluding VAT
234.36 € Includes VAT126AH (C20) 12V Closed type AGM (maintenance free) high fidelity high discharge with a life expectancy of 10-12 years
Ideal use for Autonomous Photovoltaic Systems, UPS, Boats - Yachts (service use), Electric Wheelchairs etc.
Price without VAT
Out of stock
-
Victron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics
920.00 €
738.00 € Excluding VAT
915.12 € Includes VATVictron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 3000W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.
Technical characteristics
Inverter off Power (W) 1300 Manufacturer VictronEnergy Input Voltage (V) 24V DC Output Voltage (V) 230 AC Performance level (%) 94 IP protection IP21 Weight (kg) 10.0 Warranty (years) 5 Other Information Material & Color: aluminum (blue RAL 5012), Battery cables of 1.5 meter included, G-ST18i plug Available on backorder
-
Cotek SK 2000-12 979.00 € Excluding VAT
1,213.96 € Includes VAT2000 watt (2500VA) / 12V pure sine wave Cotek SK 2000-12
COTEK sinus-converters convert DC-bus solar panels into pure AC single-phase current. Depending on the converter you will receive an input voltage of 12V, 24V or even 24V. The DC-bus is similar in power to all the applications you need.
Price without VAT
Available on backorder
-
Amerisolar Photovoltaic Panel 285W 24V poly 60 cells AS-6P30
133.00 €
79.90 € Excluding VAT
99.08 € Includes VATAmerisolar Photovoltaic Panel 285W 24V poly 60 cells AS-6P30
Out of stock
-
Grid Inverter Hybrid Sungrow SH5.0 RS
1,768.00 €
1,411.00 € Excluding VAT
1,749.64 € Includes VATGrid Inverter Hybrid Sungrow SH5.0 RS
Available on backorder
-
OFFER-Net-metering 5kw with PV 450 WATT AC/DC Panels+ELGAMA100 Energy Meter+MCL ELGAMA GSM/GPRS Modem
4,900.00 €
3,550.00 € Excluding VAT
4,402.00 € Includes VATNet-metering 5kw price with PV 460 WATT – Complete package with AC/DC Panels for energy compensation
(10 year inverter warranty – Greek Representative Office)
Net metering 5kw ( They produce in the summer in southern areas 20-25kw daily and about half or 1/3 in Winter) 6.000 - 8.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Mini Central 7000TL
3,790.00 €
2,395.00 € Excluding VAT
2,969.80 € Includes VAT7000W mains converter
Special prices for the purchase of more than 3 pieces (2395 euros + VAT) for a minimum order of 3 piecesWith Sunny Mini Central transformers without inverters, SMA is creating new data. With the completely new topology of the converters, for the first time, a degree of efficiency of 98% is achieved, while the optimized production processes lead to the lowest specific price that exists today. This offers you an amazing energy efficiency with very low investment costs and, consequently, a very short payback time of the complete installation. In addition, the three different performance classes offer maximum flexibility in the design of large or very large photovoltaic installations.
Price without VAT
Out of stock
-
4 PzS 620PB 2V Deep discharge SUNLIGHT battery
132.00 €
124.80 € Excluding VAT
154.75 € Includes VAT4 PzS 620PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 620Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage 2 Capacity (C5) 620 [AH] Length 198 [mm] Width 83 [mm] Height 713 [mm] Height with poles 740 [mm] Weight 34.600 [kg] Ind NO Applications
In stock
-
RENAC R1-1100-SS R1 Mini Series Inverter 1100W Single Phase
470.00 €
374.00 € Excluding VAT
463.76 € Includes VATRENAC R1-1100-SS R1 Mini Series Inverter 1100W, Single-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
