Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
battery voltage | 12 / 24V Auto Select | |
Rated charging current | 30A | 50A |
Nominal PV power, 12V 1a, b) | 440w | 700w |
Nominal PV power, 24V 1a, b) | 880w | 1400w |
Maximum PV open circuit voltage | 100V | |
Max. PV short circuit current 2) | 35A | 60A |
Maximum efficiency | 98% | |
Self-consumption | 10 mA | |
Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
Humidity | 95%, non-condensing | |
maximum altitude | 5000m (full rated output up to 2000m) | |
Environmental conditions | Indoor type 1, unconditioned | |
Pollution degree | PD3 | |
Data Communication Port | Bluetooth and VE.Direct |
Available on backorder
Victron SmartSolar MPPT 100/30
Extremely fast maximum power efficiency (MPPT) detection
Victron SmartSolar MPPT 100/30 Especially in the case of cloudy skies, or when light intensity is constantly changing, a super-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Victron SmartSolar MPPT 100/30
Excellent perfomance
No need for a cooling fan. Maximum efficiency exceeds 98%.
Flexible charging algorithm
Fully programmable charging algorithm and 8 pre-installed charging algorithms with optional rotary switch.
Complete electronic protection
Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.
Protection against short circuit in photovoltaics and protection against polarity reversal. Victron SmartSolar MPPT 100/30
Reverse current protection.
Internal temperature sensor
Monitors and compensates the temperature of the device by controlling the fluctuating voltage of the batteries.
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
For wired connection to the color control panel, computer or other devices.
Remote activation / deactivation
For connection to a VE.BUS BMS system.
Programmable relay output (relay)
The programmable relay can be programmed (even with a smartphone) to send distress signals or start a generator.Victron SmartSolar MPPT 100/30
Optional equipment: connection to LCD screen
An LCD screen can be attached by simply removing the protective cover from the front of the device, allowing direct monitoring of critical sizes.
Extremely fast maximum power efficiency (MPPT) detection
Advanced finding of optimal power efficiency in case of partial shading
Load output for small models
Battery life: intelligent battery management with load cut-off
Automatic battery voltage detection
Flexible charging algorithm
Overheating protection and automatic reduction of output power to protect the device when the temperature is high
GX Color Control Code
All Victron Energy MPPT Charge battery chargers are compatible with the GX Color Control Code which offers intuitive control and easy tracking for all products associated with it.
In addition to tracking and verifying products with the GX color control code, information can be sent to the VICTRON tracking website at no extra charge.
SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
battery voltage | 12 / 24V Auto Select | |
Rated charging current | 30A | 50A |
Nominal PV power, 12V 1a, b) | 440w | 700w |
Nominal PV power, 24V 1a, b) | 880w | 1400w |
Maximum PV open circuit voltage | 100V | |
Max. PV short circuit current 2) | 35A | 60A |
Maximum efficiency | 98% | |
Self-consumption | 10 mA | |
Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
Humidity | 95%, non-condensing | |
maximum altitude | 5000m (full rated output up to 2000m) | |
Environmental conditions | Indoor type 1, unconditioned | |
Pollution degree | PD3 | |
Data Communication Port | Bluetooth and VE.Direct |
Weight | 1.3 kg |
---|---|
Brand |