Victron SmartSolar MPPT 100/30 - Photovoltaic - Wind Turbine Charging Regulator

137.00 
116.00  Excluding VAT
143.84  Includes VAT

Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator

Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.

Specifications

SmartSolar Charge Controller MPPT 100/30 MPPT 100/50
battery voltage 12 / 24V Auto Select
Rated charging current 30A 50A
Nominal PV power, 12V 1a, b) 440w 700w
Nominal PV power, 24V 1a, b) 880w 1400w
Maximum PV open circuit voltage 100V
Max. PV short circuit current 2) 35A 60A
Maximum efficiency 98%
Self-consumption 10 mA
Charge voltage 'absorption' Default setting: 14,4V / 28,8V / 57,6V (adjustable)
Charge voltage 'equalization' 3) Default setting: 16,2V / 28,8V / 64,8V (adjustable)
Charge voltage 'float' Default setting: 13,8V / 27,6V / 55,2V (adjustable)
Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Protection Battery reverse polarity (fuse, not user accessible)
Output short circuit, Over temperature
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, non-condensing
maximum altitude 5000m (full rated output up to 2000m)
Environmental conditions Indoor type 1, unconditioned
Pollution degree PD3
Data Communication Port Bluetooth and VE.Direct

Available on backorder

  ... people are viewing this right now

  Share

Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator

Victron SmartSolar MPPT 100/30

Extremely fast maximum power efficiency (MPPT) detection

Victron SmartSolar MPPT 100/30 Especially in the case of cloudy skies, or when light intensity is constantly changing, a super-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

Advanced finding of optimal power efficiency in case of partial shading

Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Victron SmartSolar MPPT 100/30

Excellent perfomance

No need for a cooling fan. Maximum efficiency exceeds 98%.

Flexible charging algorithm

Fully programmable charging algorithm and 8 pre-installed charging algorithms with optional rotary switch.

Complete electronic protection

Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.

Protection against short circuit in photovoltaics and protection against polarity reversal. Victron SmartSolar MPPT 100/30

Reverse current protection.

Internal temperature sensor

Monitors and compensates the temperature of the device by controlling the fluctuating voltage of the batteries.

Built-in Bluetooth Smart

The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct

For wired connection to the color control panel, computer or other devices.

Remote activation / deactivation

For connection to a VE.BUS BMS system.

Programmable relay output (relay)

The programmable relay can be programmed (even with a smartphone) to send distress signals or start a generator.Victron SmartSolar MPPT 100/30

Optional equipment: connection to LCD screen

An LCD screen can be attached by simply removing the protective cover from the front of the device, allowing direct monitoring of critical sizes.

Top Features:

Extremely fast maximum power efficiency (MPPT) detection

Advanced finding of optimal power efficiency in case of partial shading

Load output for small models

Battery life: intelligent battery management with load cut-off

Automatic battery voltage detection

Flexible charging algorithm

Overheating protection and automatic reduction of output power to protect the device when the temperature is high

GX Color Control Code

All Victron Energy MPPT Charge battery chargers are compatible with the GX Color Control Code which offers intuitive control and easy tracking for all products associated with it.

VRM Online Portal

In addition to tracking and verifying products with the GX color control code, information can be sent to the VICTRON tracking website at no extra charge.

Specifications

SmartSolar Charge Controller MPPT 100/30 MPPT 100/50
battery voltage 12 / 24V Auto Select
Rated charging current 30A 50A
Nominal PV power, 12V 1a, b) 440w 700w
Nominal PV power, 24V 1a, b) 880w 1400w
Maximum PV open circuit voltage 100V
Max. PV short circuit current 2) 35A 60A
Maximum efficiency 98%
Self-consumption 10 mA
Charge voltage 'absorption' Default setting: 14,4V / 28,8V / 57,6V (adjustable)
Charge voltage 'equalization' 3) Default setting: 16,2V / 28,8V / 64,8V (adjustable)
Charge voltage 'float' Default setting: 13,8V / 27,6V / 55,2V (adjustable)
Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Protection Battery reverse polarity (fuse, not user accessible)
Output short circuit, Over temperature
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, non-condensing
maximum altitude 5000m (full rated output up to 2000m)
Environmental conditions Indoor type 1, unconditioned
Pollution degree PD3
Data Communication Port Bluetooth and VE.Direct
Weight 1.3 kg
Brand

SKU: Victron SmartSolar MPPT 100/30 - Charging Regulator Categories: , , , , ,

Most viewed products

Recently viewed products

Victron SmartSolar MPPT 100/30 - 30A Charge Controller,

Victron SmartSolar MPPT 100/30 - 30A Charge Controller,

Victron SmartSolar MPPT 100/30 mppt battery charge controller for PV systems, wind turbine charge controller at lowest price

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category