Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron SmartSolar MPPT 100/30 - Photovoltaic - Wind Turbine Charging Regulator
116.00 € Excluding VAT
143.84 € Includes VAT
Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
Available on backorder
... people are viewing this right now
Victron SmartSolar MPPT 100/30 - 30A Photovoltaic Charging Regulator
Victron SmartSolar MPPT 100/30
Extremely fast maximum power efficiency (MPPT) detection
Victron SmartSolar MPPT 100/30 Especially in the case of cloudy skies, or when light intensity is constantly changing, a super-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Victron SmartSolar MPPT 100/30
Excellent perfomance
No need for a cooling fan. Maximum efficiency exceeds 98%.
Flexible charging algorithm
Fully programmable charging algorithm and 8 pre-installed charging algorithms with optional rotary switch.
Complete electronic protection
Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.
Protection against short circuit in photovoltaics and protection against polarity reversal. Victron SmartSolar MPPT 100/30
Reverse current protection.
Internal temperature sensor
Monitors and compensates the temperature of the device by controlling the fluctuating voltage of the batteries.
Built-in Bluetooth Smart
The wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For wired connection to the color control panel, computer or other devices.
Remote activation / deactivation
For connection to a VE.BUS BMS system.
Programmable relay output (relay)
The programmable relay can be programmed (even with a smartphone) to send distress signals or start a generator.Victron SmartSolar MPPT 100/30
Optional equipment: connection to LCD screen
An LCD screen can be attached by simply removing the protective cover from the front of the device, allowing direct monitoring of critical sizes.
Top Features:
Extremely fast maximum power efficiency (MPPT) detection
Advanced finding of optimal power efficiency in case of partial shading
Load output for small models
Battery life: intelligent battery management with load cut-off
Automatic battery voltage detection
Flexible charging algorithm
Overheating protection and automatic reduction of output power to protect the device when the temperature is high
GX Color Control Code
All Victron Energy MPPT Charge battery chargers are compatible with the GX Color Control Code which offers intuitive control and easy tracking for all products associated with it.
VRM Online Portal
In addition to tracking and verifying products with the GX color control code, information can be sent to the VICTRON tracking website at no extra charge.
Specifications
| SmartSolar Charge Controller | MPPT 100/30 | MPPT 100/50 |
| battery voltage | 12 / 24V Auto Select | |
| Rated charging current | 30A | 50A |
| Nominal PV power, 12V 1a, b) | 440w | 700w |
| Nominal PV power, 24V 1a, b) | 880w | 1400w |
| Maximum PV open circuit voltage | 100V | |
| Max. PV short circuit current 2) | 35A | 60A |
| Maximum efficiency | 98% | |
| Self-consumption | 10 mA | |
| Charge voltage 'absorption' | Default setting: 14,4V / 28,8V / 57,6V (adjustable) | |
| Charge voltage 'equalization' 3) | Default setting: 16,2V / 28,8V / 64,8V (adjustable) | |
| Charge voltage 'float' | Default setting: 13,8V / 27,6V / 55,2V (adjustable) | |
| Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm | |
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | |
| Protection | Battery reverse polarity (fuse, not user accessible) Output short circuit, Over temperature |
|
| Operating temperature | -30 to + 60 ° C (full rated output up to 40 ° C) | |
| Humidity | 95%, non-condensing | |
| maximum altitude | 5000m (full rated output up to 2000m) | |
| Environmental conditions | Indoor type 1, unconditioned | |
| Pollution degree | PD3 | |
| Data Communication Port | Bluetooth and VE.Direct | |
| Weight | 1.3 kg |
|---|---|
| Brand |
you may also like...
Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT
56.00 € Excluding VAT
69.44 € Includes VAT
Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
97.00 €
82.00 € Excluding VAT
101.68 € Includes VAT
82.00 € Excluding VAT
101.68 € Includes VAT
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A
494.00 €
415.00 € Excluding VAT
514.60 € Includes VAT
415.00 € Excluding VAT
514.60 € Includes VAT
Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A
Victron charge controller, which has built-in Bluetooth for wireless and easy connection as well as a socket so you can insert-connect display and configuration screen. Even in cases of increased cloud cover where the light radiation changes constantly, with the Victron SmartSolar MPPT 150/85 MC4 Charging Controller ito improve energy harvest until 30% compare to common Charge Controllers PWM and until 10% compare to slower regulators MPPT. In addition to the system BatteryLife - an intelligent battery management system and with electronic components protected by resin, we have a complete solution for environmental protection.
Specifications
| BlueSolar charge controller | MPPT 150/45 | MPPT 150/60 | MPPT 150/70 | MPPT 150/85 | MPPT 150/100 |
| battery voltage | 12/24/48 V Auto Select | ||||
| Rated charging current | 45A | 60A | 70A | 85A | 100A |
| Maximum PV power |
12V: 650W / 24V: 1300W / 48V: 2600W |
12V: 860W / 24V: 1720W / 48V: 3440W |
12V: 1000W / 24V: 2000W / 48V: 4000W |
12V: 1200W / 24V: 2400W 48V: 4800 W |
12V: 1450W / 24V: 2900W / 48V: 5800W |
| Maximum PV open circuit voltage |
150V absolute maximum coldest conditions |
||||
| Maximum efficiency | 98% | ||||
| Self-consumption | 10 mA | ||||
| Charge voltage 'absorption' | Default setting: 14,4 / 28,8 / 43,2 / 57,6 V | ||||
| Charge voltage 'float' | Default setting: 13,8 / 27,6 / 41,4 / 55,2 V | ||||
| Charge algorithm | multi-stage adaptive | ||||
| Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | ||||
| Data communication port and remote on-off |
VE.Direct | ||||
| Operating temperature | -30 ° C à 60 ° C (full rated output up to 40 ° C) | ||||
| Humidity (non-condensing) | Max. 95% | ||||
Available on backorder
Victron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
72.00 €
61.00 € Excluding VAT
75.64 € Includes VAT
61.00 € Excluding VAT
75.64 € Includes VAT
Victron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
| Model No. |
|
||||
|---|---|---|---|---|---|
| Electrical data | |||||
| Max. Solar Input Power |
|
||||
| Max. Solar Panel Open Circuit Voltage |
|
||||
| Max. Solar Panel Short Circuit Current |
|
||||
| Nominal System (Battery) Voltage |
|
||||
| Self-Consumption |
|
||||
| Peak Conversion Efficiency |
|
Available on backorder
Related products
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
44.00 €
37.00 € Excluding VAT
45.88 € Includes VAT
37.00 € Excluding VAT
45.88 € Includes VAT
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
- Battery Voltage: 12 / 24V (Automatic selection)
- Night mode (details in the Remote Panel manual)
- Rated charging current: 30 A
- Second battery output: not available
- Automatic load disconnection: Yes (maximum load 30A)
- Maximum input voltage of PV panel: 28V / 55V
- Self-consumption: <10mA
- Protection: battery reverse polarity, short circuit, overheating
- Operating temperature range -20 to +50 C
- Absorption charge (default): 14.4V (12V) / 28.8V (24V)
- Float charge (default): 13.8V (12V) / 27.6V (24V)
- Equalization charge (default): 14.6V (12V) / 29.2V (24V)
- Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
- Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
- Protection class (dust-humidity): IP 30
- Dimensions: 138x70x37 mm
- Warranty: 5 Years
Available on backorder
20A Solar Charger PWM LS2024
19.00 €
13.50 € Excluding VAT
16.74 € Includes VAT
13.50 € Excluding VAT
16.74 € Includes VAT
20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
| Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 | ||
Out of stock
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
484.00 €
279.00 € Excluding VAT
345.96 € Includes VAT
279.00 € Excluding VAT
345.96 € Includes VAT
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT
49.00 € Excluding VAT
60.76 € Includes VAT
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
Waterproof charging regulator LS1024EPD 10A PWM
25.00 €
20.00 € Excluding VAT
24.80 € Includes VAT
20.00 € Excluding VAT
24.80 € Includes VAT
Waterproof / watertight charge regulator IP 67 LS1024EPD 10A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
Out of stock
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A
139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT
113.00 € Excluding VAT
140.12 € Includes VAT
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
Recently viewed products
-
Goodwe GW25K-MT 220V mains inverter
2,778.00 €
2,239.00 € Excluding VAT
2,776.36 € Includes VATGoodwe GW25K-MT 220V network inverter for interconnected net metering systems
Available on backorder
-
Battery Victron 12V/200Ah AGM Telecom (M8)
572.00 €
462.81 € Excluding VAT
573.88 € Includes VATBattery Victron 12V/200Ah AGM Telecom (M8)
Victron 12V/200Ah AGM Telecom battery (M8) designed for telecommunication applications. Excellent "space saver" for marine and vehicle applications.
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
6 SOPZS 965AH / C120 2V RES Open type Sunlight battery
274.00 €
199.00 € Excluding VAT
246.76 € Includes VATThe 2v batteries RES 6-SOPzS 965AH / C120 Sunlight, Greek-made deep discharge company are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum service life according to the manufacturer's specifications is 15 years (Design Life under Float Conditions)
SOPzS batteries are deep discharge with cylindrical lead plates and with 2500 life cycles at 50% discharge (DOD).
They are made of translucent durable housing, for easy monitoring of the liquid level and quite resistant to repeated loading-unloading.
Capacity:
969Ah / C120
Dimensions: 198mm x 137mm x 613mm (Height 640 mm with poles)
Price without VAT.
In stock
-
Photovoltaic Victron Energy 175W-12V Mono 1485 × 668 × 30mm series 4a
165.00 €
132.00 € Excluding VAT
163.68 € Includes VATPhotovoltaic VictronEnergy
175W-12V Mono 1485 × 668 × 30mm series 4aAvailable upon order from Victron Netherlands within 7-9 working days
In stock
-
290 -295 watt Photovoltaic panel European
178.00 €
95.00 € Excluding VAT
117.80 € Includes VAT290 watts - 295 watts photovoltaic panel European
Out of stock
-
50A digital charging regulator with LCD & usb screen
89.00 €
79.00 € Excluding VAT
97.96 € Includes VAT50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline
In stock
-
Semi-flexible photovoltaic panel 150 watt INVICTUS SRF-150
299.00 €
219.00 € Excluding VAT
271.56 € Includes VATSemi-flexible photovoltaic panel 150 watt INVICTUS SRF-150
Flexible photovoltaic panels - frames Semi-flexible photovoltaic panels 150 watt INVICTUS SRF-150 make them suitable for use in: yachts / yachts sailing boats, prefabricated houses, camping accommodation
Out of stock
-
7 SOPZV 990AH / C120 Gel closed battery
347.00 €
279.00 € Excluding VAT
345.96 € Includes VATClosed type photovoltaic batteries GEL 2V RES 7 SOPzV 990Ah / C120 of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.
Capacity:
994Ah / C120
Dimensions: 198mm x 137mm x 568mm (Height 595 mm with poles). Weight 48,80Kg
Price without VAT.
Available on backorder
-
Photovoltaic LX-420M/108 N-TYPE TopCon MBB (Mono)-Germany
199.00 €
114.00 € Excluding VAT
141.36 € Includes VATPhotovoltaic LUXOR ECO LINE HALF CELL M108 | LX – 410M/182-108+ | 410Wp (Mono-Si):
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum quantity 6 pieces
In case of exhaustion of the stock alternative proposal ECO 410-420 watt half cells
In stock
