Victron Phoenix 24/1200 Schuko Outlet * - 24V Pure Sine Inverter 1200W for Photovoltaics

The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.Victron Phoenix 24/1200 converter - inverter 24VDC - 230VAC 50Hz - 1200VA, pure sine with a maximum power of 2400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode.

The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.

The VE.Direct communication port can be connected to:

Computer (VE.Direct with USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Smart dongle)

Fully customizable:

Battery low voltage audible warning
Disconnect in case of very low battery voltage (cut-off)
Dynamic cut-off: the cut-off level depends on the load
Output voltage 210 - 245V
Output voltage 210 - 245V
Frequency 50 Hz or 60 Hz
ECO operation on / off

Supervision

Monitoring the input / output voltage and current and warning signal in case of error

Proven reliability:

The complete bridge and toroidal transformer topology have proven their reliability for many years. Inverters are protected against short circuits and overheating, whether due to overload or high ambient temperature.

High starting power

Required to start loads, such as power converters for LED bulbs, halogen bulbs or power tools.

ECO function:

During ECO operation, the inverter will go into standby mode when the load drops below a preset value. In standby mode, the inverter will light up for a short time (adjustable, with a default of 2,5 seconds). If the load exceeds a predetermined level, the inverter will remain open.

Remote On / Off:

Possibility of remote control of the operation with the installation of a suitable switch.

Specifications

Model: Phoenix C 24/1200
Input Voltage: 19,5V - 33,0V DC
Continuous output power: 1200VA at 25 ° C
Continuous power: 1000W / 900W at 25 ° C / 40 ° C
Starting power: 2400w
Maximum Yield: 94%
Cooling: with free ventilation and fan
Protection: from output short circuit, overload, low battery voltage, overheating
Exit: 230V / 50Hz / 60Hz

More information for Victron Energy-Phoenix 24/1200