Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-16%Limited
victron_energy_bluesolar_pwm_light_24v_30a.jpg
Victron BlueSolar PWM
Add to Compare Added to Compare

Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics

Victron BlueSolar PWM-Light

Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics

19.00 € + VAT
Victron PWM 48V-10A Offers

Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics

49.00 € + VAT
44.00 €
37.00 € Excluding VAT
45.88 € Includes VAT

Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics

Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.

Specifications : 

  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 30 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 30A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 138x70x37 mm
  • Warranty: 5 Years

Available on backorder

  ... people are viewing this right now
  Share

Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics

Victron charge regulator BlueSolar PWM Light 12/24V-30A includes an internal temperature sensor. It consists of three stages of battery charging (Bulk, absorption, float), has an advanced protection system against short circuit and over-voltages as well as possible reverse polarity effects of the solar panels-photovoltaics or the battery. Victron BlueSolar PWM Also features a battery status check function and night mode.

Specifications : 

BlueSolar PWM

  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 30 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 30A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 138x70x37 mm
  • Warranty: 5 Years

Equipped with advanced PWM technology, the BlueSolar PWM Light controller offers smooth and controlled charging to your batteries, maximizing their lifespan. 12/24V auto-sensing capability adds flexibility, enabling seamless integration with 12V and 24V systems.

The robust construction of the Victron BlueSolar PWM Light ensures durability and reliable operation in a variety of environmental conditions. The controller is user-friendly, with a simple interface for easy installation and monitoring. LED indicators provide real-time information about charge status, battery level and system health.

Whether you are setting up a small solar power system for off-grid applications or improving the performance of your existing PV installation, the Victron BlueSolar PWM Light 12/24V-30A is a reliable choice for optimizing energy consumption and efficiently managing your battery bank.

Weight 3 kg
Brand

SKU: Victron BlueSolar PWM Light 12 / 24V-30A - PWM Charging Regulator Categories: , , , , , ,

you may also like...

-22%Limited
Add to cart
Victron PWM 48V-10A Offers
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics 63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT

Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics

Its charge regulator Victron Bluesolar PWM Light 48V-10A  is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.

 

Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 10A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 10A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-16%LimitedSOLD OUT
read more
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A 91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT

Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.

 

Charging Regulator, with 2 outputs for charging Batteries

  1. PWM controller
  2. Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
  3. Programmable charging current ratio (normal setting: equal current for both batteries)
  4. Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
  5. Internal heat sensor and optional remote control heat sensor
  6. It is protected from overvoltage
  7. It is protected against short circuits
  8. It is protected from reverse polarity of photovoltaic panels and / or batteries.

Price without VAT

Out of stock

-16%Limited
Add to cart
Best Offer Victron PWM 20A
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics 57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT

Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics 51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics

The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.

Programmable with night mode

  1. The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  3. Battery status check function (Remote Panel required)
  4. Night mode (Remote Panel required)
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
  7. Optional external temperature sensor.

 Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

Related products

-13%LimitedSOLD OUT
read more
Phocos CXN 20 CHARGING REGULATOR PHOCOS 12V-24V 20A for autonomous photovoltaics
Phocos CXN 20 69.00 €
60.00 € Excluding VAT
74.40 € Includes VAT

 Phocos CXN 20 CHARGING REGULATOR PHOCOS 12V-24V 20A for autonomous photovoltaics

Price without VAT

Out of stock

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-29%Limited
Add to cart
LS2024EPD 20A PWM Charging regulator waterproof 42.00 €
29.90 € Excluding VAT
37.08 € Includes VAT

Waterproof / watertight charge regulator IP 67  LS2024EPD 20A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

Price without VAT

In stock

-15%Limited
Add to cart
Victron MPPT 10A Special Offer
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines 48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines

Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

 

Specifications

 

Type MPPT
Power (W) 145 (12V) / 290 (24V)
Manufacturer VictronEnergy
Input voltage (V) 75
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct

 

Available on backorder

-22%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-10 12V-24V-10A 37.00 €
29.00 € Excluding VAT
35.96 € Includes VAT

System voltage: 12V / 24V automatic selection. Maximum charging / load current: 10A / 10A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22

Price without VAT

In stock

-8%LimitedSOLD OUT
read more
Charging regulator VS6024BN 60A PWM-USB 129.00 €
119.00 € Excluding VAT
147.56 € Includes VAT

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Price without VAT

Out of stock

-17%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-2048 24 / 48V - 20A 119.16 €
99.00 € Excluding VAT
122.76 € Includes VAT

Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.

Price without VAT

In stock

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-18%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-20 12 / 24V - 20A 45.00 €
37.00 € Excluding VAT
45.88 € Includes VAT

System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22

Price without VAT

In stock

-31%LimitedSOLD OUT
read more
CHARGING REGULATOR PHOCOS CX-40 12 / 24V - 40A 97.30 €
67.00 € Excluding VAT
83.08 € Includes VAT

System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22

Price without VAT

Out of stock

-17%Limited
Add to cart
Epsolar Dual Battery PWM 10A 35.00 €
29.00 € Excluding VAT
35.96 € Includes VAT

10A Dual Battery PWM charge regulator for 2 batteries. 

Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection

Specification:

Electrical parameters
System voltage 12 / 24VDC Auto work
Nominal battery current 10A
Charge circuit voltage drop .0.26V
Discharge circuit voltage drop .0.15V
Self consumption ≤ 6mA
Working temperature -35 ℃ to + 55 ℃
Humidity 10% -90% NC
Enclosure IP30
Port 4mm2
Net weight 0.15KG

Price without VAT

-44%Limited
Add to cart
WATERPROOF CHARGING REGULATOR LS1024BP 57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT

Charging regulator  waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans

Price without VAT

In stock

Most viewed products

Recently viewed products

  • -36%LimitedSOLD OUT
    read more
    Effect-BTG-12-120D 336.00 €
    215.00 € Excluding VAT
    266.60 € Includes VAT

    120AH / 12V 10-12 years Gel life

    Out of stock

  • -27%Limited
    Add to cart
    PZSX 210 AH 116.00 €
    85.00 € Excluding VAT
    105.40 € Includes VAT

    210 Ah 2V with a lifespan of 12 years

     

      CLUB   TYPE   COUNTRY R.EKF R. FORT. A BAR.      DIMENSIONS (THOUSAND) EACH VALUE
       KIDDING        ELEMENT   AH @ 5H A @ 5H Arch. End M.Y. Χ Ψ Υ S.Y €
    105 2 EPzS 210 210 42 34 8 13,4 47 198 510 540 58,31

     

    price without VAT

    In stock

  • -30%LimitedSOLD OUT
    read more
    24V 220V - 1000 watt / 24v Pure Sine Inverter Ecomomy OBM Asia 186.00 €
    129.90 € Excluding VAT
    161.08 € Includes VAT

    Reliable, efficient and economical pure sine wave inverter.
    Rated power: 1000W, Rated Trend: 24V

    2 years limited guarantee

    The pure sine converter Inverter Ecomomy OBM Asia 1000 watt / 24v offers excellent sine wave quality, designed to operate demanding power tools and sensitive system loads.

    Applications

    Cars, RVs, boats, tractors, trucks, laptops, TVs, video games, CD players, DVD players, power tools, office equipment, large household appliances (refrigerator, kitchen / etc). A powerful Pure Sine Inverter ready to meet your every need

    Out of stock

  • -21%Limited
    Add to cart
    Phocos PL 40 579.00 €
    455.00 € Excluding VAT
    564.20 € Includes VAT

    Charging regulator 12/24 / 48V 40 / 7A LCD data logger

    40A digital programmable with multi-voltage control capability

    Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range.

    Price without VAT

    In stock

  • -33%Limited
    Add to cart
    Luxor photovoltaic panels 420 watts
    Luxor photovoltaic panels 420 watts 199.00 €
    134.00 € Excluding VAT
    166.16 € Includes VAT

    Photovoltaic Luxor Solar offers.

    LX-380M/120 HC PERC MBB (Mono) / 380 watt half cells –> price 117 euros + VAT (Minimum quantity 13 pieces)

    LX-420M/108 N-TYPE TopCon MBB (Mono)/ 420 watt half cells –> price 134 euros + VAT (Minimum quantity 12 pieces)

    LX-540M/144 Bifacial HC PERC MBB (Mono)/ 540 watt half cells –> price 167 euros + VAT (Minimum quantity 10 pieces)

    LX-545M/144 HC PERC MBB (Mono) / 545 watt half cells –> price 169 euros + VAT (Minimum quantity 10 pieces)

    LX-550M/144 HC PERC MBB (Mono) / 550 watt half cells –> price 176 euros + VAT (Minimum quantity 10 pieces)

    LX-550M/144 Bifacial HC PERC MBB (Mono)/ 550 watt half cells –> price 176 euros + VAT (Minimum quantity 10 pieces)

    Special wholesale or larger quantity offers

    Price without VAT

    In stock

  • -29%LimitedSOLD OUT
    read more
    10kw Photovoltaic BP Solar 230wp 11,900.00 €
    8,500.00 € Excluding VAT
    10,540.00 € Includes VAT

    10kw with photovoltaics with BP Solar 230 watts polycrystalline silicon

    Price without VAT

    Out of stock

  • -21%Limited
    Add to cart
    25kva Closed Type Oil Generator With WIRMAN automatic switchboard
    25kva Closed Type Oil Generator With WIRMAN automatic switchboard 7,700.00 €
    6,090.00 € Excluding VAT
    7,551.60 € Includes VAT

    25kva Closed Type Oil Generator With WIRMAN automatic switchboard

    Available on backorder

  • -42%Limited
    Add to cart
    Pure Sine Hybrid Inverter 3.5kw/3500W 24V & Charge Controller 30-80A China
    3.5KW-Pure Sine Hybrid Inverter / 3500W 24V & Charge Controller 30-80A China 891.00 €
    514.00 € Excluding VAT
    637.36 € Includes VAT

    3.5KW-Pure Sine Hybrid Inverter 3.5kw/3500W 24V & Charge Controller 30-80A China

    In stock

  • -14%Limited
    Add to cart
    24V-autonomous-8kwh-9.7kwh 24v / 220AC - 24V Photovoltaic System Europe Premium
    9kwh-11kwh 24v / 220AC - 24V Europe Premium Photovoltaic System with 2V batteries 4,350.00 €
    3,740.00 € Excluding VAT
    4,637.60 € Includes VAT

    8kwh - 9.7kwh / 24v / 220AC - 24V Photovoltaic System Europe Premium 2V batteries (5 years warranty *)

    24V Photovoltaics Europe Premium with 2V deep discharge batteries and life expectancy of 12-14 years.

     

    PV system analysis 8kwh-9.7 kwh (every 24 hours during the summer months.)

    For a similar performance in Winter, the double panels or wind turbine Sunnily X600Watt - 700Watt / 24V (5.5-6 beaufort / 5-6 hours / 24 hoursà 4.5 kwh are required)

    Appliances: Energy class A refrigerator Medium, ECO Medium Washing Machine (up to 1200watt) + Lighting + 5 lamps + TV + small appliances 1000wh-1500wh or small air conditioner for 2 hours

    Price without VAT

    Available on backorder

  • -40%LimitedSOLD OUT
    read more
    Amerisolar Photovoltaic Panel 285W 24V poly 60 cells AS-6P30
    Amerisolar Photovoltaic Panel 285W 24V poly 60 cells AS-6P30 133.00 €
    79.90 € Excluding VAT
    99.08 € Includes VAT

    Amerisolar Photovoltaic Panel 285W 24V poly 60 cells AS-6P30

    Out of stock

Victron BlueSolar PWM Light 12/24V-30A - Charge Controller,

Victron BlueSolar PWM Light 12/24V-30A - Charge Controller,

Victron BlueSolar PWM 12/24V-30A. PWM Battery Charge Controller for your PV, cottage, boat, RV.

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category