Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-16%Limited
solar-charger-victron-blue-solar-mppt-100-30 -_- 12_24.jpg
Add to Compare Added to Compare

Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines

Victron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines

150.00 € + VAT

Victron BlueSolar MPPT 150/35 - Charging Regulator 35A-MPPT for Photovoltaic-Wind Turbines

150.00 € + VAT
119.00 €
100.00 € Excluding VAT
124.00 € Includes VAT

Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines


Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

 

Specifications

Model Victron BlueSolar MPPT 100/30
battery voltage 12/24 volt auto select
Rated charging current 30A
Maximum PV power, 12V (a, b) 440 W
Maximum PV power, 24V (a, b) 880 W
Max. PV Short Circuit Current 30A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Self consumption 10mA
Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V
Charge voltage 'float' Adjustable, default = 13.8V / 27.6V
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing

Available on backorder

  ... people are viewing this right now
  Share

Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines


Key Features and Benefits :

  • Maximum Power Charging Regulator (MPPT).
  • Increases charging current by up to 30% compared to a PWM Digital Charging Controller.
  • Stored charging settings for eight types of batteries and two additional battery equalizer settings.
  • Remote temperature sensor.
  • In case of low voltage in the batteries disconnects the output voltage.
  • Short circuit protection.
  • Over-tension protection.
  • Reverse polarity protection of solar panels and / or battery.

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Extremely fast find the maximum power efficiency point (MPPT)
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

Excellent perfomance
Without cooling fan. The mmaximum yield exceeds 98%.
Full output current up to 40 ° C (104 ° F).

Flexible charging algorithm
Fully programmable charging algorithm and eight already programmed algorithms to be selected with a rotary switch.

Specifications

 

 

Model Victron BlueSolar MPPT 100/30
battery voltage 12/24 volt auto select
Rated charging current 30A
Maximum PV power, 12V (a, b) 440 W
Maximum PV power, 24V (a, b) 880 W
Max. PV Short Circuit Current 30A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Self consumption 10mA
Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V
Charge voltage 'float' Adjustable, default = 13.8V / 27.6V
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing
Data Communication Port VE.Direct
Colour Blue (RAL 5012)
Power terminals 13 mm² / # 6 AWG
Protection Category IP43 (Electronic Components), IP22 (Connection Area)
Weight 1.3 kg (2.9 lb)
Dimensions (hxwxd) 130 x 186 x 70 mm (5.1 x 3.4 x 2.6 inches)

 

Weight 1 kg
Brand

SKU: Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT Categories: , , , ,

you may also like...

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines 375.00 €
315.00 € Excluding VAT
390.60 € Includes VAT

Victron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V)
Rated charging current A 70
Maximum PV power 12V 1a, b)   1000w
Maximum PV power 24V 1a, b)
 2000w
Maximum PV power 48V 1a, b) 4000w
Maximum PV open circuit voltage
 150V absolute maximum coldest conditions

145V Start-up and Operating Maximum
Maximum efficiency  98%

Information at the link

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines 215.00 €
181.00 € Excluding VAT
224.44 € Includes VAT

Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Model Victron BlueSolar MPPT 150/45-Tr
Part# SCC010045200
battery voltage 12/24/48 volt auto select, 36 volt software select
Rated charging current 45A
Maximum PV power, 12/24/48 volts 650/1300/2600 Watts
Maximum PV open circuit voltage 150V absolute maximum coldest conditions
145V Start-up and Operating Maximum
Peak efficiency 98%
Self consumption 10 mA
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / -32 mV / -68 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing
Data Communication Port VE.Direct

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines 340.00 €
286.00 € Excluding VAT
354.64 € Includes VAT

Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V)
Rated charging current A 60
Maximum PV power 12V 1a, b)   860w
Maximum PV power 24V 1a, b)
 1720w
Maximum PV power 48V 1a, b) 3440w

Available on backorder

-15%Limited
Add to cart
Victron MPPT 10A Special Offer
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines 48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines

Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

 

Specifications

 

Type MPPT
Power (W) 145 (12V) / 290 (24V)
Manufacturer VictronEnergy
Input voltage (V) 75
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct

 

Available on backorder

Related products

-16%Limited
Add to cart
Victron BlueSolar PWM
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics 44.00 €
37.00 € Excluding VAT
45.88 € Includes VAT

Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics

Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.

Specifications : 

  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 30 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 30A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 138x70x37 mm
  • Warranty: 5 Years

Available on backorder

-15%Limited
Add to cart
Victron BlueSolar PWM
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics 26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 5A
Standby Self-Consumption 10mA
Battery Voltage 12V, 24V
Load Current max. 5A
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 5A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar PWM-Light
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics 19.00 €
16.00 € Excluding VAT
19.84 € Includes VAT

Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.

Programmable with night mode

  1. The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
  2. Three stages of battery charging
  3. Battery status check function
  4. Night operation
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
Specifications 
Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 5A
Standby Self-Consumption 10mA
Battery Voltage 12V, 24V
Load Current max. 5A
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 5A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-15%Limited
Add to cart
Victron BlueSolar PWM PRO
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics 81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

General characteristics:

  1. The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel

 

Available on backorder

-17%Limited
Add to cart
Epsolar Dual Battery PWM 10A 35.00 €
29.00 € Excluding VAT
35.96 € Includes VAT

10A Dual Battery PWM charge regulator for 2 batteries. 

Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection

Specification:

Electrical parameters
System voltage 12 / 24VDC Auto work
Nominal battery current 10A
Charge circuit voltage drop .0.26V
Discharge circuit voltage drop .0.15V
Self consumption ≤ 6mA
Working temperature -35 ℃ to + 55 ℃
Humidity 10% -90% NC
Enclosure IP30
Port 4mm2
Net weight 0.15KG

Price without VAT

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-22%Limited
Add to cart
Victron PWM 48V-10A Offers
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics 63.00 €
49.00 € Excluding VAT
60.76 € Includes VAT

Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics

Its charge regulator Victron Bluesolar PWM Light 48V-10A  is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.

 

Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 10A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 10A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-29%Limited
Add to cart
LS2024EPD 20A PWM Charging regulator waterproof 42.00 €
29.90 € Excluding VAT
37.08 € Includes VAT

Waterproof / watertight charge regulator IP 67  LS2024EPD 20A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

Price without VAT

In stock

-20%LimitedSOLD OUT
read more
Waterproof charging regulator LS1024EPD 10A PWM 25.00 €
20.00 € Excluding VAT
24.80 € Includes VAT

Waterproof / watertight charge regulator IP 67  LS1024EPD 10A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

Price without VAT

Out of stock

-14%Limited
Add to cart
Victron BlueSolar PWM PRO 10A
Victron BlueSolar PWM PRO 10A 29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 10A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 10A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Price without VAT

Available on backorder

-17%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-2048 24 / 48V - 20A 119.16 €
99.00 € Excluding VAT
122.76 € Includes VAT

Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.

Price without VAT

In stock

Most viewed products

Recently viewed products

  • -36%LimitedSOLD OUT
    read more
    Effect-BTG-12-120D 336.00 €
    215.00 € Excluding VAT
    266.60 € Includes VAT

    120AH / 12V 10-12 years Gel life

    Out of stock

  • -27%Limited
    Add to cart
    PZSX 210 AH 116.00 €
    85.00 € Excluding VAT
    105.40 € Includes VAT

    210 Ah 2V with a lifespan of 12 years

     

      CLUB   TYPE   COUNTRY R.EKF R. FORT. A BAR.      DIMENSIONS (THOUSAND) EACH VALUE
       KIDDING        ELEMENT   AH @ 5H A @ 5H Arch. End M.Y. Χ Ψ Υ S.Y €
    105 2 EPzS 210 210 42 34 8 13,4 47 198 510 540 58,31

     

    price without VAT

    In stock

  • -30%LimitedSOLD OUT
    read more
    24V 220V - 1000 watt / 24v Pure Sine Inverter Ecomomy OBM Asia 186.00 €
    129.90 € Excluding VAT
    161.08 € Includes VAT

    Reliable, efficient and economical pure sine wave inverter.
    Rated power: 1000W, Rated Trend: 24V

    2 years limited guarantee

    The pure sine converter Inverter Ecomomy OBM Asia 1000 watt / 24v offers excellent sine wave quality, designed to operate demanding power tools and sensitive system loads.

    Applications

    Cars, RVs, boats, tractors, trucks, laptops, TVs, video games, CD players, DVD players, power tools, office equipment, large household appliances (refrigerator, kitchen / etc). A powerful Pure Sine Inverter ready to meet your every need

    Out of stock

  • -21%Limited
    Add to cart
    Phocos PL 40 579.00 €
    455.00 € Excluding VAT
    564.20 € Includes VAT

    Charging regulator 12/24 / 48V 40 / 7A LCD data logger

    40A digital programmable with multi-voltage control capability

    Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range.

    Price without VAT

    In stock

  • -8%LimitedSOLD OUT
    read more
    2 PzB 210 2V Deep discharge SUNLIGHT battery 59.00 €
    54.51 € Excluding VAT
    67.59 € Includes VAT

    2 PzB 210 2V SUNLIGHT deep discharge battery. Traction battery - open type with liquids, with 2500 cycles at 50% COMING and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily power to your industrial or commercial vehicles.

     

    Out of stock

  • -28%LimitedSOLD OUT
    read more
    Deep discharge PV batteries
    4 SOPZS 720AH / C120 2V RES Open type Sunlight battery 235.00 €
    169.90 € Excluding VAT
    210.68 € Includes VAT

    The 2v batteries RES 4-SOPzS 720AH / C120  Sunlight, Greek-made deep discharge company are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum service life according to the manufacturer's specifications is 15 years (Design Life under Float Conditions)

    Capacity:

    721Ah / C120

    Dimensions: 198mm x 101mm x 613mm (Height 640 mm with poles)

    Price without VAT.

    Out of stock

  • -21%Limited
    Add to cart
    2V Deep Discharge Battery
    2V ECOPVSM 1000 Deep Discharge Battery, Open type 299.00 €
    235.00 € Excluding VAT
    291.40 € Includes VAT

    2V ECOPVSM 1000 Deep Discharge Battery, Open type

    The 2V ECOPVSM 1000 Open Type Deep Discharge Battery is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.

    Capacity: 982Ah / C-100

    Dimensions: 198mm x 119mm x 613mm

    Weight: 43,5 Kgr

    Price without VAT.

  • -29%Limited
    Add to cart
    8kw-hybrid-inverter-fotovoltaika-REVO-VM-II-Series-8kw-mppt-hybrid inverter 8000 watts
    Hybrid stand-alone inverters, photovoltaics, storage backup hybrid-inverter-8kw-photovoltaic-REVO-VM-II-Series-8kw-mppt-hybrid inverter 8kw watt
    8000 Watt-Hybrid Inverter Any Grid SolarFam REVO VM II Series 8kw Imported from Holland-8000W / 48V MPPT 500V/120A 1,750.00 €
    1,240.00 € Excluding VAT
    1,537.60 € Includes VAT

    8000 Watt-Hybrid Inverter Any Grid SolarFam REVO VM II Series 8kw Imported from Holland-8000W / 48V MPPT 500V/120A

    The only one capable of operation even WITHOUT BATTERIES

    Available on backorder

  • -20%Limited
    Add to cart
    RENAC R3-25000-G5-grid-inverter for photovoltaics, net metering, photovoltaics on the roof, domestic
    RENAC R3-25000-G5 Pre Series 25KW Three Phase 2,735.00 €
    2,200.00 € Excluding VAT
    2,728.00 € Includes VAT

    RENAC R3-25000-G5 Pre Series 25KW, Three-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

    Available on backorder

  • -25%Limited
    Add to cart
    Net-metering 5kw with PV 450 WATT for tiled roof - prices
    Net metering 5kW photovoltaic package with 450 watt panels 3,650.00 €
    2,750.00 € Excluding VAT
    3,410.00 € Includes VAT

    Net metering 5kW photovoltaic package offer 

    11 Photovoltaic panels 450 watts

    Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty

    Tile roof supports for 11 PV panels.

    In stock

Victron BlueSolar MPPT 100/30 - 30A-MPPT Charge Controller for Photovoltaics,

Victron BlueSolar MPPT 100/30 - 30A-MPPT Charge Controller for Photovoltaics,

PRICE, BUY. COST, CHARGING REGULATOR VICTRON BlueSolar MPPT 100/30 (12 / 24V-30A) FOR VOLTAGE AUTONOMOUS SYSTEM

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category