Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-16%Limited
solar-charger-victron-blue-solar-mppt-100-30 -_- 12_24.jpg
Add to Compare Added to Compare

Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines

Victron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines

150.00 € + VAT

Victron BlueSolar MPPT 150/35 - Charging Regulator 35A-MPPT for Photovoltaic-Wind Turbines

150.00 € + VAT
119.00 €
100.00 € Excluding VAT
124.00 € Includes VAT

Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines


Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

 

Specifications

Model Victron BlueSolar MPPT 100/30
battery voltage 12/24 volt auto select
Rated charging current 30A
Maximum PV power, 12V (a, b) 440 W
Maximum PV power, 24V (a, b) 880 W
Max. PV Short Circuit Current 30A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Self consumption 10mA
Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V
Charge voltage 'float' Adjustable, default = 13.8V / 27.6V
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing

Available on backorder

  ... people are viewing this right now
  Share

Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines


Key Features and Benefits :

  • Maximum Power Charging Regulator (MPPT).
  • Increases charging current by up to 30% compared to a PWM Digital Charging Controller.
  • Stored charging settings for eight types of batteries and two additional battery equalizer settings.
  • Remote temperature sensor.
  • In case of low voltage in the batteries disconnects the output voltage.
  • Short circuit protection.
  • Over-tension protection.
  • Reverse polarity protection of solar panels and / or battery.

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Extremely fast find the maximum power efficiency point (MPPT)
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

Excellent perfomance
Without cooling fan. The mmaximum yield exceeds 98%.
Full output current up to 40 ° C (104 ° F).

Flexible charging algorithm
Fully programmable charging algorithm and eight already programmed algorithms to be selected with a rotary switch.

Specifications

 

 

Model Victron BlueSolar MPPT 100/30
battery voltage 12/24 volt auto select
Rated charging current 30A
Maximum PV power, 12V (a, b) 440 W
Maximum PV power, 24V (a, b) 880 W
Max. PV Short Circuit Current 30A
Maximum PV open circuit voltage 100V
Peak efficiency 98%
Self consumption 10mA
Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V
Charge voltage 'float' Adjustable, default = 13.8V / 27.6V
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing
Data Communication Port VE.Direct
Colour Blue (RAL 5012)
Power terminals 13 mm² / # 6 AWG
Protection Category IP43 (Electronic Components), IP22 (Connection Area)
Weight 1.3 kg (2.9 lb)
Dimensions (hxwxd) 130 x 186 x 70 mm (5.1 x 3.4 x 2.6 inches)

 

Weight 1 kg
Brand

SKU: Victron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT Categories: , , , ,

you may also like...

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines 375.00 €
315.00 € Excluding VAT
390.60 € Includes VAT

Victron BlueSolar MPPT 150/70-Tr - Charging Regulator 70A-MPPT for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V)
Rated charging current A 70
Maximum PV power 12V 1a, b)   1000w
Maximum PV power 24V 1a, b)
 2000w
Maximum PV power 48V 1a, b) 4000w
Maximum PV open circuit voltage
 150V absolute maximum coldest conditions

145V Start-up and Operating Maximum
Maximum efficiency  98%

Information at the link

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines 215.00 €
181.00 € Excluding VAT
224.44 € Includes VAT

Victron BlueSolar MPPT 150/45-Tr - 45A-MPPT Charge Regulator for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Model Victron BlueSolar MPPT 150/45-Tr
Part# SCC010045200
battery voltage 12/24/48 volt auto select, 36 volt software select
Rated charging current 45A
Maximum PV power, 12/24/48 volts 650/1300/2600 Watts
Maximum PV open circuit voltage 150V absolute maximum coldest conditions
145V Start-up and Operating Maximum
Peak efficiency 98%
Self consumption 10 mA
Charge algorithm Multi-stage adaptive
Temperature compensation -16 mV / -32 mV / -68 mV / ° C
Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C)
Humidity 95%, Non-condensing
Data Communication Port VE.Direct

Available on backorder

-15%Limited
Add to cart
Victron MPPT 10A Special Offer
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines 48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines

Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

 

Specifications

 

Type MPPT
Power (W) 145 (12V) / 290 (24V)
Manufacturer VictronEnergy
Input voltage (V) 75
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct

 

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines 340.00 €
286.00 € Excluding VAT
354.64 € Includes VAT

Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V)
Rated charging current A 60
Maximum PV power 12V 1a, b)   860w
Maximum PV power 24V 1a, b)
 1720w
Maximum PV power 48V 1a, b) 3440w

Available on backorder

Related products

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-20%LimitedSOLD OUT
read more
Waterproof charging regulator LS1024EPD 10A PWM 25.00 €
20.00 € Excluding VAT
24.80 € Includes VAT

Waterproof / watertight charge regulator IP 67  LS1024EPD 10A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

Price without VAT

Out of stock

-48%LimitedSOLD OUT
read more
LS2024EU 20A PWM-USB Charging regulator 28.00 €
14.50 € Excluding VAT
17.98 € Includes VAT

LS2024EU 20A PWM charge controller with USB

Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.

Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection

Price without VAT

Out of stock

-16%Limited
Add to cart
Victron BlueSolar
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics 51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics

The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.

Programmable with night mode

  1. The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  3. Battery status check function (Remote Panel required)
  4. Night mode (Remote Panel required)
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
  7. Optional external temperature sensor.

 Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

-31%LimitedSOLD OUT
read more
Charging regulator LS1024EU 10A PWM-USB 18.00 €
12.40 € Excluding VAT
15.38 € Includes VAT

Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.

Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection

Price without VAT

Out of stock

-15%Limited
Add to cart
Bluesolar PWM Light 48V-30A
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics 66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT

Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics

The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-15%Limited
Add to cart
Victron BlueSolar PWM PRO
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics 81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

General characteristics:

  1. The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel

 

Available on backorder

-17%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-2048 24 / 48V - 20A 119.16 €
99.00 € Excluding VAT
122.76 € Includes VAT

Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.

Price without VAT

In stock

-17%Limited
Add to cart
Epsolar Dual Battery PWM 10A 35.00 €
29.00 € Excluding VAT
35.96 € Includes VAT

10A Dual Battery PWM charge regulator for 2 batteries. 

Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection

Specification:

Electrical parameters
System voltage 12 / 24VDC Auto work
Nominal battery current 10A
Charge circuit voltage drop .0.26V
Discharge circuit voltage drop .0.15V
Self consumption ≤ 6mA
Working temperature -35 ℃ to + 55 ℃
Humidity 10% -90% NC
Enclosure IP30
Port 4mm2
Net weight 0.15KG

Price without VAT

-27%Limited
Add to cart
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC 679.00 €
499.00 € Excluding VAT
618.76 € Includes VAT

Cotek CX1280 Battery Charger - 12V - 80A - 230VAC 

Price without VAT

In stock

-16%Limited
Add to cart
Best Offer Victron PWM 20A
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics 57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT

Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

Most viewed products

Recently viewed products

  • -4%Limited
    Add to cart
    5 PzS 775PB 2V Deep discharge SUNLIGHT battery 157.00 €
    151.00 € Excluding VAT
    187.24 € Includes VAT

    5 PzS 775PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 775Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 775 [AH]
    Length 198 [mm]
    Width 101 [mm]
    Height 713 [mm]
    Height with poles 740 [mm]
    Weight 42.000 [kg]
    Ind NO

    In stock

  • -22%Limited
    Add to cart
    10 kW interconnected photovoltaic
    Photovoltaic solar energy: Photovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO/182-144-European certified for autonomous photovoltaics - net metering - roof photovoltaics
    10kW PPC Photovoltaic ECO 545 Solar on roofs 6,800.00 €
    5,300.00 € Excluding VAT
    6,572.00 € Includes VAT

    10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation

    Photovoltaic Eco 545-550 watt mono half cell Eco ES -545MONO / 182-144-European certified for autonomous photovoltaic- net metering - roof photovoltaics

    Photovoltaic Eco 545

    See all offers here

     

    Available on backorder

  • -27%LimitedSOLD OUT
    read more
    S. Energy Battery ML140 / 150AH C100 AGM LONG LIFE 253.00 €
    185.00 € Excluding VAT
    229.40 € Includes VAT

    Battery S. Energy ML140 / 150AH C100 Closed type AGM Long Life (without maintenance) deep discharge of high fidelity with a life expectancy of 10-12 years Suitable for use in Autonomous Photovoltaic Systems, UPS, Boats - Yachts (service use), Electric Wheelchairs etc.

    Price without VAT

    Out of stock

  • -33%Limited
    Add to cart
    CLEAN HALF INVERTER 1500Watt 24V DC-Economical 359.00 €
    239.00 € Excluding VAT
    296.36 € Includes VAT

    Pure sine INVERTER 24V DC 1500Watt HIP-1500-24v / Economic inverter / DC-AC sine wave converter 1500W / 24V. Instantaneous load starting current 3000W. Yield> 90%. Low current of the same consumption

    Use in: Small cottages, caravans, Cars, boats, tractors, trucks, laptops, TVs, power tools, office equipment, and home appliances

    1 YEAR WARRANTY

    Price without VAT

    In stock

  • -22%Limited
    Add to cart
    photovoltaic system for permanent homes 15kwh-16kwh-17kwh /24v/220AC - 24V Europe Premium Photovoltaic System for air conditioner, refrigerator, washing machine, vacuum cleaner, hair dryer, electric stove (5 years warranty*)
    16kwh -17kwh24v/220AC – 24V Europe Photovoltaic System for small permanent residence 5,900.00 €
    4,600.00 € Excluding VAT
    5,704.00 € Includes VAT

    16kwh-17kwh /24v/220AC – 24V Photovoltaic System Europe Premium (5 years warranty*)

    Appliances: electric stove/oven (1200 watt) air conditioner (600 watt), refrigerator up to 280kwh/year, washing machine (1200 watt) vacuum cleaner (1200 watt), hair dryer (1200 watt) not at the same time.

  • -16%Limited
    Add to cart
    Victron Energy MultiPlus-II 48/10000 / 140-100 Pure Sine Inverter-for photovoltaics, prices.reviews
    Victron Energy MultiPlus-II 48/10000 / 140-100 Pure Sine Inverter 3,295.00 €
    2,768.00 € Excluding VAT
    3,432.32 € Includes VAT

    Victron Energy MultiPlus-II 48/10000 / 140-100 Pure Sine Inverter. A MultiPlus, with ESS or Power Storage System functionality

    Available on backorder

  • -20%Limited
    Add to cart
    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1), Bluetooth Smart, prices.reviews
    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1) 144.40 €
    115.45 € Excluding VAT
    143.16 € Includes VAT

    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1). Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.

    Available on backorder

  • -20%Limited
    Add to cart
    Deep discharge battery OBM ECOGEL 240Ah, C-100 / 12V 448.00 €
    359.00 € Excluding VAT
    445.16 € Includes VAT

    BATTERY OBM ECOGEL A-240 12 240 Ah 12V C100

    Deep discharge batteries OBM ECOGEL 240Ah is a very reliable and quality battery solution for energy storage systems. The batteries OBM ECOGEL 240Ah They provide maximum performance, resistance to overload and deep discharge while their construction is such that it provides them with high resistance to vibrations, vibrations and extreme weather phenomena.

    The 12V deep discharge batteries OBM ECOGEL 240Ah are designed with technology GEL (JELL)  for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electric elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
    accumulator.

    Dimensions:522* 240 * 223mm
    Weight: 60 kg

    A 2-year warranty is provided

    Price without VAT

  • -0%Limited
    Add to cart
    Victron 12V/240Ah AGM Deep Cycle Battery (M8) 520.00 €
    518.00 € Excluding VAT
    642.32 € Includes VAT

    Victron 12V/240Ah AGM Deep Cycle Battery (M8)

    Victron 12V/240Ah AGM Deep Cycle (M8) closed type deep discharge photovoltaic battery from Victron Energy for high starting amperes. Supplied with M8 flat copper poles and pins, which ensures the best possible connection contact and eliminates the need for battery terminals.

    Available on backorder

  • -9%Limited
    Add to cart
    2 PzS 250PB 2V Deep discharge SUNLIGHT battery 64.00 €
    58.48 € Excluding VAT
    72.52 € Includes VAT

    2 PzS 250PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 250Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 250 [AH]
    Length 198 [mm]
    Width 47 [mm]
    Height 568 [mm]
    Height with poles 595 [mm]
    Weight 15.000 [kg]
    Ind NO

    In stock

Victron BlueSolar MPPT 100/30 - 30A-MPPT Charge Controller for Photovoltaics,

Victron BlueSolar MPPT 100/30 - 30A-MPPT Charge Controller for Photovoltaics,

PRICE, BUY. COST, CHARGING REGULATOR VICTRON BlueSolar MPPT 100/30 (12 / 24V-30A) FOR VOLTAGE AUTONOMOUS SYSTEM

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category